
  2025-10-27
---------------
2025-10-27 13:24:39.786   java.io.FileNotFoundException : Can't read sample list cache from /srv/Bruker/TopSpin/sampleList.json
2025-10-27 13:24:40.741   Graphical User Interface started.
2025-10-27 13:24:40.743   Operating system = LINUX, JVM type (bit) = 64

2025-10-27 13:24:40.743   User properties directory=/home/nmrafd/.topspin1/prop
2025-10-27 13:24:41.366   cmd=_create_drag_tranfer_handler
2025-10-27 13:24:41.570   initCprCom: opening file for local session key at '/opt/topspin4.4.0/prog/curdir/nmrafd/keystore/localSession.key'
2025-10-27 13:24:41.572   initCprCom: local session key imported successfully.
2025-10-27 13:24:41.574   initCprCom: GUI session key created
2025-10-27 13:24:41.595   cmd=init_cpr
2025-10-27 13:24:41.599   Start ORB: recommended port=5650.
2025-10-27 13:24:41.647   Start ORB: successful on port 5651
2025-10-27 13:24:41.647   cmd=cprlistener
2025-10-27 13:24:41.649   Start CprListenerServer: activate.
2025-10-27 13:24:41.668   Start CprListenerServer: activation successful, id = corbaloc:iiop:127.0.0.1:5651/5980144956/CtrlPOA/CPRClient, localized id = corbaloc:iiop:127.0.0.1:5651/5980144956/CtrlPOA/CPRClient
2025-10-27 13:24:41.849   Contact configuration service: URL=corbaloc:iiop:132.229.121.105:5501/ConfigurationServer, IOR=IOR:010000002400000049444c3a6272756b65722e64652f6370722f436f6e66696775726174696f6e3a312e3000010000000000000084000000010102000a0000003132372e302e302e31007d1513000000436f6e66696775726174696f6e536572766572000300000000000000080000000100000000545441010000001c000000010000000100010001000000010001050901010001000000090101000300000018000000010000000d0000003134392e3233362e39392e3100007d15
2025-10-27 13:24:41.849   Contact configuration service: local contact, using URL: corbaloc:iiop:127.0.0.1:5501/ConfigurationServer
2025-10-27 13:24:41.878   Contact configuration service: successful.
2025-10-27 13:24:41.878   Contact configuration service: local session, authentication done.
2025-10-27 13:24:41.898   Contact CPR: local contact, narrowing object for: corbaloc:iiop:127.0.0.1:5501/CPRMsg, IOR=IOR:010000001d00000049444c3a6272756b65722e64652f6370722f4350524d73673a312e3000000000010000000000000078000000010102000a0000003132372e302e302e31007d15060000004350524d736700000300000000000000080000000100000000545441010000001c000000010000000100010001000000010001050901010001000000090101000300000018000000010000000d0000003134392e3233362e39392e3100007d15
2025-10-27 13:24:41.901   Contact CPR: object is valid.
2025-10-27 13:24:41.901   Contact CPR: address of CprListener is corbaloc:iiop:127.0.0.1:5651/5980144956/CtrlPOA/CPRClient
2025-10-27 13:24:41.901   Contact CPR: login at CPR with "corbaloc:iiop:127.0.0.1:5651/5980144956/CtrlPOA/CPRClient"
2025-10-27 13:24:42.153   Contact CPR: attempt #0 to get assigned client id...
2025-10-27 13:24:42.154   Contact CPR: successful, got id '1'.
2025-10-27 13:24:42.155   CPR connection successful, client id = 1
2025-10-27 13:24:42.197   Start dataserver: launching command, waiting on result
2025-10-27 13:24:42.198   Start dataserver: getting current address
2025-10-27 13:24:42.316   Start dataserver: URL=corbaloc:iiop:132.229.121.105:5505/NMRDataServer, IOR=IOR:010000002800000049444c3a6272756b65722e64652f646174612f4469736346756e6350726f76696465723a312e300001000000000000009800000001010200100000003133322e3232392e3132312e3130350081150000110000004e4d5244617461536572766572312e31300000000400000000000000080000000100000000545441010000001c000000010000000100010001000000010001050901010001000000090101000300000014000000010000000a0000003132372e302e302e310081151400000008000000010066006600b315
2025-10-27 13:24:42.316   Start dataserver: local contact, using URL: corbaloc:iiop:127.0.0.1:5505/NMRDataServer
2025-10-27 13:24:42.323   Start dataserver: path to logfile is "/opt/topspin4.4.0/prog/curdir/nmrafd/stdout.NMRDataServer1.log"
2025-10-27 13:24:42.323   Start dataserver: successful.
2025-10-27 13:24:42.325   cmd=_show_lic
2025-10-27 13:24:42.329   getLicense called: attribute
2025-10-27 13:24:42.339   to CPR: "checkout_license verbose attribute" [id 1], COMMAND_WAIT_TERM
2025-10-27 13:24:42.342   external cmd from "CPR": "lic_attribute" on "", option="-2"
2025-10-27 13:24:42.343   cmd=lic_attribute
2025-10-27 13:24:42.345   License type: 
2025-10-27 13:24:42.346   getAttribute called: 0
2025-10-27 13:24:42.346   wait for license attribute
2025-10-27 13:24:42.346   get license attribute finished
2025-10-27 13:24:42.348   CPR task 1 resumed normally, termstat=0
2025-10-27 13:24:42.545   try RestartClient: serverAddress: corbaloc:iiop:127.0.0.1:5521/restartserver2
2025-10-27 13:24:42.552   RestartClient: serverAddress is valid!
2025-10-27 13:24:42.676   cmd=_set_cprhist
2025-10-27 13:24:42.759   to CPR: "get_version_info -info 1761567882759" [id 2], COMMAND_WAIT_START
2025-10-27 13:24:42.764   fromCPR loadAlert id = 0 message = ~~~~~1761567882759 TopSpin 4.4.0
2025-10-27 13:24:42.765   CPR task 2 resumed normally, termstat=0
2025-10-27 13:24:42.765   GUI Version = TopSpin 4.4.0 / local
2025-10-27 13:24:42.915   com.bruker.bio.nmrdatasearch.api.invoker.ApiException : Communication with NMR Search Backend failed. Trying again. Cause:
java.net.ConnectException: Failed to connect to localhost/0:0:0:0:0:0:0:1:8080
2025-10-27 13:24:50.407   cmd=configuretopspin
2025-10-27 13:24:50.409   configureTopSpin: entered
2025-10-27 13:24:50.411   configureTopSpin: try to set permanent lock
2025-10-27 13:24:50.419   configureTopSpin: successfully set permanent lock
2025-10-27 13:24:50.422   Installation configured with curinst: Avance NEO at IP 149.236.99.9
2025-10-27 13:24:50.431   try RestartClient: serverAddress: corbaloc:iiop:149.236.99.9:5520/restartserver2
2025-10-27 13:24:50.435   RestartClient: serverAddress is valid!
2025-10-27 13:24:50.584   LOCKCONF, SamChgEth[0-3], PduEth, LDUETH [DLM, no, no, no, no, 192.168.99.99, no]
2025-10-27 13:24:50.607   ValueLine config FALSE
2025-10-27 13:24:50.613   getLicense called: 1021040000:TOPSPIN_NMRPT
2025-10-27 13:24:50.613   to CPR: "checkout_license verbose 1021040000:TOPSPIN_NMRPT" [id 3], COMMAND_WAIT_TERM
2025-10-27 13:24:50.624   external cmd from "CPR": "lic_error CodeMeter checkout(1021040000:TOPSPIN_NMRPT) at 13:24:50.615 failed
No matching license entry found for feature "1021040000:TOPSPIN_NMRPT" .
CmContainer Entry not found, Error 200.This information is now cached until TopSpin restart.
" on "/UndefinedDir/UndefinedName/1/pdata/1", option="-2"
2025-10-27 13:24:50.624   cmd=lic_error CodeMeter checkout(1021040000:TOPSPIN_NMRPT) at 13:24:50.615 failed
No matching license entry found for feature "1021040000:TOPSPIN_NMRPT" .
CmContainer Entry not found, Error 200.This information is now cached until TopSpin restart.
2025-10-27 13:24:50.625   receiveLicenseErrorFromCpr called
2025-10-27 13:24:50.626   receiveLicenseErrorFromCpr called: CodeMeter checkout(1021040000:TOPSPIN_NMRPT) at 13:24:50.615 failed
No matching license entry found for feature "1021040000:TOPSPIN_NMRPT" .
CmContainer Entry not found, Error 200.This information is now cached until TopSpin restart.
2025-10-27 13:24:50.627   CPR task 3 resumed normally, termstat=-1
2025-10-27 13:24:50.627   getLicense called: -1
2025-10-27 13:24:50.628   getLastError called: CodeMeter checkout(1021040000:TOPSPIN_NMRPT) at 13:24:50.615 failed
No matching license entry found for feature "1021040000:TOPSPIN_NMRPT" .
CmContainer Entry not found, Error 200.This information is now cached until TopSpin restart.
2025-10-27 13:24:50.628   getLicense called, error: CodeMeter checkout(1021040000:TOPSPIN_NMRPT) at 13:24:50.615 failed
No matching license entry found for feature "1021040000:TOPSPIN_NMRPT" .
CmContainer Entry not found, Error 200.This information is now cached until TopSpin restart.
2025-10-27 13:24:50.629   License for product code 1021040000:TOPSPIN_NMRPT valid: [false]
2025-10-27 13:24:50.629   getLicense called: 1021091000:TOPSPIN_DEVCLASS_NEO
2025-10-27 13:24:50.629   to CPR: "checkout_license verbose 1021091000:TOPSPIN_DEVCLASS_NEO" [id 4], COMMAND_WAIT_TERM
2025-10-27 13:24:50.667   CPR task 4 resumed normally, termstat=0
2025-10-27 13:24:50.667   getLicense called: 0
2025-10-27 13:24:50.667   License for product code 1021091000:TOPSPIN_DEVCLASS_NEO valid: [true]
2025-10-27 13:24:50.681   Datastation: false, ELCB: true, EVTU: true, BACSAIR: true, MAS Unit: true, VTU: false,
                      Prodigy: false, AVNeo: true, MiniSpec: false, Fourier: false, Multi-receiver: true, number of receivers: 3,
                      Multipeak lock: true, NMR thermometer: false, 19F lock: false, Sample changer: false,
                      Lock: true, SoftLock: false, GradientAmplifiers: true,
                      isCoreLine: false, hasSCU: true, spectrometerLicense: TOPSPIN_DEVCLASS_NEO , LT-MAS type: 0
2025-10-27 13:24:50.793   FidDataServer0 successfully started
2025-10-27 13:24:50.893   FidDataServer1 successfully started
2025-10-27 13:24:50.994   FidDataServer2 successfully started
2025-10-27 13:24:50.996   cmd=startwatcher
2025-10-27 13:24:50.996   cmd=startsoapmassettingsserver
2025-10-27 13:24:50.996   cmd=setendpointsformas
2025-10-27 13:24:50.997   cmd=setendpointsforltmas
2025-10-27 13:24:50.997   Trying to start SOAPMasSettingsServer
2025-10-27 13:24:50.999   Do not publish
2025-10-27 13:24:51.000   cmd=configurebasicsamplechangerformas
2025-10-27 13:24:51.000   cmd=startsoapvtuserver
2025-10-27 13:24:51.001   cmd=startmassercuritysupervisor
2025-10-27 13:24:51.001   cmd=startbsmsserver
2025-10-27 13:24:51.002   Trying to start SOAPVTUServer
2025-10-27 13:24:51.008   Start BsmsServer
2025-10-27 13:24:51.008   sendGUIrestarted 
2025-10-27 13:24:51.009   Try to get EPU Ip address : 149.236.99.9
2025-10-27 13:24:51.011   entering sendGUIrestarted 
2025-10-27 13:24:51.109   sendGUIrestarted 
2025-10-27 13:24:51.109   entering sendGUIrestarted 
2025-10-27 13:24:51.115   sendGUIrestarted 
2025-10-27 13:24:51.115   entering sendGUIrestarted 
2025-10-27 13:24:51.116   getHconfServer started remote.
2025-10-27 13:24:51.117   getHconfServer started remote.
2025-10-27 13:24:51.119   BasicSampleChanger start arguments: ipAddress=192.168.99.100 identPort=80,10000 logFileName=stdout.BasicSampleChangerServer.log logFileSize=104857600 restartServerIpAddress=192.168.99.100 restartServerPort=5520 nmrSystemType=avance
2025-10-27 13:24:51.127   switched to real spectrometer and no shutdown in progress, start SuperVision StatusMessageFetcher thread 
2025-10-27 13:24:51.130   Initializing coil temperature values
2025-10-27 13:24:51.134   configureTopSpin: finished successfully...
2025-10-27 13:24:51.141   Cannot get maintenance status of instrument: com.bruker.pmw.client.invoker.ApiException: java.net.ConnectException: Failed to connect to localhost/0:0:0:0:0:0:0:1:8080
2025-10-27 13:24:51.213   Trying to start SOAPProbeServer
2025-10-27 13:24:51.221   BasicSampleChanger start arguments: ipAddress=192.168.99.100 identPort=80,10000 logFileName=stdout.BasicSampleChangerServer.log logFileSize=104857600 restartServerIpAddress=192.168.99.100 restartServerPort=5520 nmrSystemType=avance
2025-10-27 13:24:51.244   Start BsmsServer: activation successful, id: corbaloc:iiop:149.236.99.1:5651/5980144956/CtrlPOA/BsmsServer
2025-10-27 13:24:51.270   Error checking for MAS probe: Error in pushCommandAndParameters reported by ProbeServer:
getCurrentProbeId: no probe is installed!
2025-10-27 13:24:51.270   Error checking for MAS probe: Error in pushCommandAndParameters reported by ProbeServer:
getCurrentProbeId: no probe is installed!
2025-10-27 13:24:51.270   Get LIFTMODE
2025-10-27 13:24:51.271   Initial, no CRP probe
2025-10-27 13:24:51.271   BSMS Server started: LIFTMODE: 0
2025-10-27 13:24:51.271   pushParameterThread started
2025-10-27 13:24:51.273   VTC_VT_GAS_SLOPE_LIMIT set to 500.0 lph/s
2025-10-27 13:24:51.648   SOAPVTUServer web service is published at address http://149.236.99.1:10002/services/Bruker.Automation.Services.IBrukTemperature/soap
2025-10-27 13:24:51.648   SOAPProbeServer web service is published at address http://149.236.99.1:10003/services/Bruker.Automation.Services.IBrukProbe/soap
2025-10-27 13:24:51.649   SOAPVTUServer started on port: 10002
2025-10-27 13:24:51.649   SOAPProbeServer started on port: 10003
2025-10-27 13:24:51.650   SOAPMasSettingsServer web service is published at address http://149.236.99.1:10001/services/Bruker.Automation.Services.IBrukSettings/soap
2025-10-27 13:24:51.650   Trying to start IBrukNotificationsConsumerSOAPServer
2025-10-27 13:24:51.650   SOAPMasSettingsServer started on port: 10001
2025-10-27 13:24:51.717   IBrukNotificationsConsumerSOAPServer web service is published at address http://149.236.99.1:10004/services/Bruker.Automation.Services.IBrukNotificationsConsumer/soap
2025-10-27 13:24:51.717   SOAPNotificationServer started on port: 10004
2025-10-27 13:24:51.718   Trying to start SOAPMasSampleTransportServer
2025-10-27 13:24:51.773   SOAPMasSampleTransportServer web service is published at address http://149.236.99.1:10005/services/Bruker.Automation.Services.IBrukTransfer/soap
2025-10-27 13:24:51.774   SOAPMasSampleTransportServer started on port: 10005
2025-10-27 13:24:51.774   Trying to start SOAPExternalSampleTransportServer
2025-10-27 13:24:51.810   SOAPExternalSampleTransportServer web service is published at address http://149.236.99.1:10006/services/Bruker.Automation.Services.IBrukTransfer/soap
2025-10-27 13:24:51.810   SOAPExternalSampleTransportServer started on port: 10006
2025-10-27 13:24:51.847   Trying to start AcqAdapterServer
2025-10-27 13:24:51.849   AcqAdapterServer started successfully, id: {0}:corbaloc:iiop:127.0.0.1:5651/5980144956/CtrlPOA/AcqAdapterServer
2025-10-27 13:24:51.921   GUI Version = TopSpin 4.4.0 / local
2025-10-27 13:24:51.921   cmd=login start
2025-10-27 13:24:51.925   cmd=_p_getprinter
2025-10-27 13:24:51.931   cmd=start_product_update
2025-10-27 13:24:51.932   cmd=start_promotions_refresh
2025-10-27 13:24:51.932   cmd=runonce
2025-10-27 13:24:51.935   cmd=license
2025-10-27 13:24:51.940   Endpoint for BrukerAutomationServicesIBrukSystemEndpoints successfully created for MAS: Server: [http://149.236.99.1:10003/services/Bruker.Automation.Services.IBrukProbe/soap, http://149.236.99.1:10005/services/Bruker.Automation.Services.IBrukTransfer/soap, http://149.236.99.1:10006/services/Bruker.Automation.Services.IBrukTransfer/soap, http://149.236.99.1:10001/services/Bruker.Automation.Services.IBrukSettings/soap, http://149.236.99.1:10004/services/Bruker.Automation.Services.IBrukNotificationsConsumer/soap], Endpoint: 149.236.99.9:20005, ID: [Probe, Flip, SampleDestination, Settings, Notifier]
2025-10-27 13:24:51.941   License code: CheckExpireDate
2025-10-27 13:24:51.942   to CPR: "checkout_license expire TOPSPIN4" [id 5], COMMAND_WAIT_TERM
2025-10-27 13:24:51.962   Old call: [HPLaserjetP4015x, Cups-PDF]
2025-10-27 13:24:51.988   external cmd from "CPR": "lic_expire_date 2036-10-25T06:47:23+02:00" on "/UndefinedDir/UndefinedName/1/pdata/1", option="-2"
2025-10-27 13:24:51.988   cmd=lic_expire_date 2036-10-25T06:47:23+02:00
2025-10-27 13:24:51.989   CPR task 5 resumed normally, termstat=0
2025-10-27 13:24:52.111   cmd=expinstallcheck
2025-10-27 13:24:52.111   cmd=_db_cleanxml
2025-10-27 13:24:52.112   cmd=startspooler
2025-10-27 13:24:52.112   cmd=mons
2025-10-27 13:24:52.112   cmd=bsmsdisp
2025-10-27 13:24:52.112   cmd=_start_network_interface_silent
2025-10-27 13:24:52.115   cmd=monpdu
2025-10-27 13:24:52.118   cmd=monacq
2025-10-27 13:24:52.118   cmd=monmas
2025-10-27 13:24:52.119   cmd=monbsmstemp
2025-10-27 13:24:52.119   cmd=montime
2025-10-27 13:24:52.120   cmd=monspooler
2025-10-27 13:24:52.120   cmd=monautodiag
2025-10-27 13:24:52.121   cmd=montemp
2025-10-27 13:24:52.121   cmd=monpowindicator
2025-10-27 13:24:52.122   cmd=monIndicator
2025-10-27 13:24:52.122   cmd=monacb
2025-10-27 13:24:52.123   cmd=monadc
2025-10-27 13:24:52.144   cmd=monacqrun
2025-10-27 13:24:52.147   cmd=monIndicatorRun
2025-10-27 13:24:52.150   cmd=monacbrun
2025-10-27 13:24:52.201   to CPR: "checkout_license expire no_checkout 1011014000:TOPSPIN4" [id 6], COMMAND_WAIT_TERM
2025-10-27 13:24:52.246   external cmd from "CPR": "lic_expire_date 2036-10-25T06:47:23+02:00" on "/UndefinedDir/UndefinedName/1/pdata/1", option="-2"
2025-10-27 13:24:52.247   cmd=lic_expire_date 2036-10-25T06:47:23+02:00
2025-10-27 13:24:52.248   CPR task 6 resumed normally, termstat=0
2025-10-27 13:24:52.248   to CPR: "checkout_license expire no_checkout 1021023000:TOPSPIN_GXP_4" [id 7], COMMAND_WAIT_TERM
2025-10-27 13:24:52.254   CPR task 7 resumed normally, termstat=-1
2025-10-27 13:24:52.256   No license available for 1021023000:TOPSPIN_GXP_4
2025-10-27 13:24:52.257   to CPR: "checkout_license expire no_checkout 1011140100:SMP_CMCA" [id 8], COMMAND_WAIT_TERM
2025-10-27 13:24:52.307   external cmd from "CPR": "lic_expire_date 2036-10-25T06:47:23+02:00" on "/UndefinedDir/UndefinedName/1/pdata/1", option="-2"
2025-10-27 13:24:52.308   cmd=lic_expire_date 2036-10-25T06:47:23+02:00
2025-10-27 13:24:52.309   CPR task 8 resumed normally, termstat=0
2025-10-27 13:24:52.310   to CPR: "checkout_license expire no_checkout 1011140200:SMP_CMCA_CLASSROOM" [id 9], COMMAND_WAIT_TERM
2025-10-27 13:24:52.316   CPR task 9 resumed normally, termstat=-1
2025-10-27 13:24:52.318   No license available for 1011140200:SMP_CMCA_CLASSROOM
2025-10-27 13:24:52.318   to CPR: "checkout_license expire no_checkout 1011160100:SMP_CMCQ" [id 10], COMMAND_WAIT_TERM
2025-10-27 13:24:52.325   CPR task 10 resumed normally, termstat=-1
2025-10-27 13:24:52.326   No license available for 1011160100:SMP_CMCQ
2025-10-27 13:24:52.326   to CPR: "checkout_license expire no_checkout 1021290200:FBS_ADVANCED" [id 11], COMMAND_WAIT_TERM
2025-10-27 13:24:52.333   CPR task 11 resumed normally, termstat=-1
2025-10-27 13:24:52.333   No license available for 1021290200:FBS_ADVANCED
2025-10-27 13:24:52.334   to CPR: "checkout_license expire no_checkout 1011330100:SMP_POTENCY_MR" [id 12], COMMAND_WAIT_TERM
2025-10-27 13:24:52.340   CPR task 12 resumed normally, termstat=-1
2025-10-27 13:24:52.340   No license available for 1011330100:SMP_POTENCY_MR
2025-10-27 13:24:52.341   to CPR: "checkout_license expire no_checkout 1011320100:SMP_SMART_DRIVE_NMR" [id 13], COMMAND_WAIT_TERM
2025-10-27 13:24:52.347   CPR task 13 resumed normally, termstat=-1
2025-10-27 13:24:52.347   No license available for 1011320100:SMP_SMART_DRIVE_NMR
2025-10-27 13:24:52.348   to CPR: "checkout_license expire no_checkout 1011150100:SMP_STRUCELU" [id 14], COMMAND_WAIT_TERM
2025-10-27 13:24:52.370   cmd=_create_drag_tranfer_handler
2025-10-27 13:24:52.392   external cmd from "CPR": "lic_expire_date 2022-10-04T06:47:23+02:00" on "/UndefinedDir/UndefinedName/1/pdata/1", option="-2"
2025-10-27 13:24:52.392   cmd=lic_expire_date 2022-10-04T06:47:23+02:00
2025-10-27 13:24:52.393   CPR task 14 resumed normally, termstat=0
2025-10-27 13:24:52.393   to CPR: "checkout_license expire no_checkout 1011150200:SMP_STRUCELU_CLASSROOM" [id 15], COMMAND_WAIT_TERM
2025-10-27 13:24:52.397   CPR task 15 resumed normally, termstat=-1
2025-10-27 13:24:52.398   No license available for 1011150200:SMP_STRUCELU_CLASSROOM
2025-10-27 13:24:52.398   to CPR: "checkout_license expire no_checkout 1021030000:TOPSPIN_NUS" [id 16], COMMAND_WAIT_TERM
2025-10-27 13:24:52.404   CPR task 16 resumed normally, termstat=-1
2025-10-27 13:24:52.404   No license available for 1021030000:TOPSPIN_NUS
2025-10-27 13:24:52.404   to CPR: "checkout_license expire no_checkout 1021230100:ASSURE-SST" [id 17], COMMAND_WAIT_TERM
2025-10-27 13:24:52.474   external cmd from "CPR": "lic_expire_date 2022-10-04T06:47:23+02:00" on "/UndefinedDir/UndefinedName/1/pdata/1", option="-2"
2025-10-27 13:24:52.475   cmd=lic_expire_date 2022-10-04T06:47:23+02:00
2025-10-27 13:24:52.476   CPR task 17 resumed normally, termstat=0
2025-10-27 13:24:52.476   to CPR: "checkout_license expire no_checkout 1021230200:AUTO_CALIBRATE" [id 18], COMMAND_WAIT_TERM
2025-10-27 13:24:52.484   CPR task 18 resumed normally, termstat=-1
2025-10-27 13:24:52.484   No license available for 1021230200:AUTO_CALIBRATE
2025-10-27 13:24:52.625   Error getting HTTP proxy server address for no: restartServer2: restartBase: The IP address no could not be found in /opt/topspin/prog/curdir/root/HttpProxyServer.ref
If the unit with this IP address has been switched on recently
you should run 'cf' now.
2025-10-27 13:24:52.626   Error getting HTTP proxy server address for no: restartServer2: restartBase: The IP address no could not be found in /opt/topspin/prog/curdir/root/HttpProxyServer.ref
If the unit with this IP address has been switched on recently
you should run 'cf' now.
2025-10-27 13:24:52.678   Error configuring BasicSampleChanger for MAS: Initializing ATMA failed:  ATMA2 MAS Server initialize failed: Error in getParameters reported by ProbeServer: no probe installed!
2025-10-27 13:24:53.180   Try to get EPU Ip address : 149.236.99.9
2025-10-27 13:24:53.183   new PDU message: 2=2025-09-23 14:54:50.060: Spectrometer is starting up...
2025-10-27 13:24:53.187   new PDU message: 12=2025-09-23 14:54:50.060: Device Blade: Starting...
2025-10-27 13:24:53.187   new PDU message: 12=2025-09-23 14:54:50.060: Device Blade: is ready for start up...
2025-10-27 13:24:53.188   new PDU message: 12=2025-09-23 14:54:50.060: Device Blade: Starting up takes approximately 3s.
2025-10-27 13:24:53.188   new PDU message: 10=2025-09-23 14:54:50.060: Device Blade: running!
2025-10-27 13:24:53.188   new PDU message: 12=2025-09-23 14:54:50.060: Device PDU Router Outlet: Starting...
2025-10-27 13:24:53.188   new PDU message: 12=2025-09-23 14:54:50.062: Device PDU Router Outlet: is ready for start up...
2025-10-27 13:24:53.189   new PDU message: 12=2025-09-23 14:54:50.062: Switching on power outlet 1 ...
2025-10-27 13:24:53.189   new PDU message: 10=2025-09-23 14:54:50.073: Power outlet 1: Done!
2025-10-27 13:24:53.189   new PDU message: 12=2025-09-23 14:54:50.073: Device PDU Router Outlet: Starting up takes approximately 3s.
2025-10-27 13:24:53.190   new PDU message: 10=2025-09-23 14:54:50.075: Device PDU Router Outlet: running!
2025-10-27 13:24:53.190   new PDU message: 12=2025-09-23 14:54:50.075: Device PDU Blade Outlet: Starting...
2025-10-27 13:24:53.190   new PDU message: 12=2025-09-23 14:54:50.077: Device PDU Blade Outlet: is ready for start up...
2025-10-27 13:24:53.190   new PDU message: 12=2025-09-23 14:54:50.077: Device PDU Blade Outlet: Starting up takes approximately 3s.
2025-10-27 13:24:53.191   new PDU message: 10=2025-09-23 14:54:50.077: Device PDU Blade Outlet: running!
2025-10-27 13:24:53.191   new PDU message: 12=2025-09-23 14:54:50.077: Device PDU1: Starting...
2025-10-27 13:24:53.191   new PDU message: 12=2025-09-23 14:54:50.079: Device PDU1: is ready for start up...
2025-10-27 13:24:53.192   new PDU message: 12=2025-09-23 14:54:50.080: Switching on power outlet 3 ...
2025-10-27 13:24:53.192   new PDU message: 10=2025-09-23 14:54:50.085: Power outlet 3: Done!
2025-10-27 13:24:53.192   PDU address: 149.236.99.9:161
2025-10-27 13:24:53.193   new PDU message: 12=2025-09-23 14:54:53.085: Switching on power outlet 4 ...
2025-10-27 13:24:53.193   new PDU message: 10=2025-09-23 14:54:53.096: Power outlet 4: Done!
2025-10-27 13:24:53.193   new PDU message: 12=2025-09-23 14:54:56.096: Switching on power outlet 5 ...
2025-10-27 13:24:53.193   new PDU message: 10=2025-09-23 14:54:56.108: Power outlet 5: Done!
2025-10-27 13:24:53.194   new PDU message: 12=2025-09-23 14:54:59.108: Switching on power outlet 6 ...
2025-10-27 13:24:53.194   new PDU message: 10=2025-09-23 14:54:59.119: Power outlet 6: Done!
2025-10-27 13:24:53.194   new PDU message: 12=2025-09-23 14:55:02.119: Switching on power outlet 7 ...
2025-10-27 13:24:53.194   new PDU message: 10=2025-09-23 14:55:02.130: Power outlet 7: Done!
2025-10-27 13:24:53.195   new PDU message: 12=2025-09-23 14:55:05.130: Switching on power outlet 8 ...
2025-10-27 13:24:53.195   new PDU message: 10=2025-09-23 14:55:05.141: Power outlet 8: Done!
2025-10-27 13:24:53.195   new PDU message: 12=2025-09-23 14:55:08.142: Device PDU1: Starting up takes approximately 3s.
2025-10-27 13:24:53.195   new PDU message: 10=2025-09-23 14:55:08.157: Device PDU1: running!
2025-10-27 13:24:53.195   new PDU message: 12=2025-09-23 14:55:08.157: Device PDU2: Starting...
2025-10-27 13:24:53.196   new PDU message: 12=2025-09-23 14:55:08.159: Device PDU2: is ready for start up...
2025-10-27 13:24:53.196   new PDU message: 12=2025-09-23 14:55:08.161: Switching on power outlet 2 ...
2025-10-27 13:24:53.196   new PDU message: 10=2025-09-23 14:55:08.171: Power outlet 2: Done!
2025-10-27 13:24:53.196   new PDU message: 12=2025-09-23 14:55:11.172: Switching on power outlet 3 ...
2025-10-27 13:24:53.197   new PDU message: 10=2025-09-23 14:55:11.183: Power outlet 3: Done!
2025-10-27 13:24:53.197   new PDU message: 12=2025-09-23 14:55:14.183: Switching on power outlet 4 ...
2025-10-27 13:24:53.197   new PDU message: 10=2025-09-23 14:55:14.194: Power outlet 4: Done!
2025-10-27 13:24:53.197   new PDU message: 12=2025-09-23 14:55:17.194: Switching on power outlet 5 ...
2025-10-27 13:24:53.198   new PDU message: 10=2025-09-23 14:55:17.205: Power outlet 5: Done!
2025-10-27 13:24:53.198   new PDU message: 12=2025-09-23 14:55:20.205: Switching on power outlet 6 ...
2025-10-27 13:24:53.198   new PDU message: 10=2025-09-23 14:55:20.216: Power outlet 6: Done!
2025-10-27 13:24:53.198   new PDU message: 12=2025-09-23 14:55:23.217: Switching on power outlet 7 ...
2025-10-27 13:24:53.198   new PDU message: 10=2025-09-23 14:55:23.227: Power outlet 7: Done!
2025-10-27 13:24:53.199   new PDU message: 12=2025-09-23 14:55:26.228: Switching on power outlet 8 ...
2025-10-27 13:24:53.199   new PDU message: 10=2025-09-23 14:55:26.239: Power outlet 8: Done!
2025-10-27 13:24:53.199   new PDU message: 12=2025-09-23 14:55:29.239: Device PDU2: Starting up takes approximately 3s.
2025-10-27 13:24:53.199   new PDU message: 10=2025-09-23 14:55:29.256: Device PDU2: running!
2025-10-27 13:24:53.200   new PDU message: 12=2025-09-23 14:55:29.256: Device PDU3: Starting...
2025-10-27 13:24:53.200   new PDU message: 12=2025-09-23 14:55:29.259: Device PDU3: is ready for start up...
2025-10-27 13:24:53.200   new PDU message: 12=2025-09-23 14:55:29.260: Switching on power outlet 2 ...
2025-10-27 13:24:53.200   new PDU message: 10=2025-09-23 14:55:29.271: Power outlet 2: Done!
2025-10-27 13:24:53.200   new PDU message: 12=2025-09-23 14:55:32.272: Switching on power outlet 3 ...
2025-10-27 13:24:53.201   new PDU message: 10=2025-09-23 14:55:32.282: Power outlet 3: Done!
2025-10-27 13:24:53.201   new PDU message: 12=2025-09-23 14:55:35.283: Switching on power outlet 4 ...
2025-10-27 13:24:53.201   new PDU message: 10=2025-09-23 14:55:35.294: Power outlet 4: Done!
2025-10-27 13:24:53.201   new PDU message: 12=2025-09-23 14:55:38.294: Switching on power outlet 5 ...
2025-10-27 13:24:53.202   new PDU message: 10=2025-09-23 14:55:38.305: Power outlet 5: Done!
2025-10-27 13:24:53.202   new PDU message: 12=2025-09-23 14:55:41.306: Switching on power outlet 6 ...
2025-10-27 13:24:53.202   new PDU message: 10=2025-09-23 14:55:41.317: Power outlet 6: Done!
2025-10-27 13:24:53.202   new PDU message: 12=2025-09-23 14:55:44.317: Switching on power outlet 7 ...
2025-10-27 13:24:53.203   new PDU message: 10=2025-09-23 14:55:44.328: Power outlet 7: Done!
2025-10-27 13:24:53.203   new PDU message: 12=2025-09-23 14:55:47.328: Switching on power outlet 8 ...
2025-10-27 13:24:53.203   new PDU message: 10=2025-09-23 14:55:47.339: Power outlet 8: Done!
2025-10-27 13:24:53.203   new PDU message: 12=2025-09-23 14:55:50.340: Device PDU3: Starting up takes approximately 3s.
2025-10-27 13:24:53.203   new PDU message: 10=2025-09-23 14:55:50.357: Device PDU3: running!
2025-10-27 13:24:53.203   new PDU message: 12=2025-09-23 14:55:50.357: Device BSMS 1: Starting...
2025-10-27 13:24:53.204   new PDU message: 12=2025-09-23 14:55:50.362: Device BSMS 1: is ready for start up...
2025-10-27 13:24:53.204   new PDU message: 12=2025-09-23 14:55:50.362: Device BSMS 1: getting shim start up duration, which may take up to 45 seconds ...
2025-10-27 13:24:53.204   new PDU message: 12=2025-09-23 14:58:00.512: Device BSMS 1: Starting up takes approximately 90s.
2025-10-27 13:24:53.204   new PDU message: 12=2025-09-23 14:58:00.713: Device BSMS 1: Ramp up duration for shims is 20 seconds.
2025-10-27 13:24:53.204   new PDU message: 12=2025-09-23 14:58:00.713: Device BSMS 1: getting shim start up duration, which may take up to 45 seconds ...
2025-10-27 13:24:53.205   new PDU message: 10=2025-09-23 14:58:01.028: Device BSMS 1: Status: running!
2025-10-27 13:24:53.205   new PDU message: 10=2025-09-23 14:58:01.028: Device BSMS 1: running!
2025-10-27 13:24:53.205   new PDU message: 12=2025-09-23 14:58:01.028: Device BSMS 2: Starting...
2025-10-27 13:24:53.205   new PDU message: 12=2025-09-23 14:58:01.028: Device BSMS 2: does not exist, ignoring BSMS 2!
2025-10-27 13:24:53.205   new PDU message: 12=2025-09-23 14:58:01.028: Device Acquisition Server 1: Starting...
2025-10-27 13:24:53.205   new PDU message: 12=2025-09-23 14:58:01.028: Device Acquisition Server 1: is ready for start up...
2025-10-27 13:24:53.206   new PDU message: 12=2025-09-23 14:58:01.028: Device Acquisition Server 1: Starting up takes approximately 3s.
2025-10-27 13:24:53.206   new PDU message: 10=2025-09-23 14:58:01.028: Device Acquisition Server 1: running!
2025-10-27 13:24:53.206   new PDU message: 0=2025-09-23 14:58:01.028: Spectrometer is running!
2025-10-27 13:24:53.237   Error checking for MAS probe: Error in pushCommandAndParameters reported by ProbeServer:
getCurrentProbeId: no probe is installed!
2025-10-27 13:24:53.244   Error checking for MAS probe: Error in pushCommandAndParameters reported by ProbeServer:
getCurrentProbeId: no probe is installed!
2025-10-27 13:24:53.244   flip with ATMA, isIProbe: false, isMasProbe: false, flipWithATMA: false, result: false
2025-10-27 13:24:53.750   Error getting optical rotor detection: Error in getParameters reported by ProbeServer:
getCurrentProbeId: no probe is installed!
2025-10-27 13:24:53.798   BasicSampleChanger MAS configuration: false, false
2025-10-27 13:24:54.009   Server error in writeRemoteFileToLocalDisk:
Cannot set file permissions:
IDL:bruker.de/common/NotAvailable:1.0
getChunkFromBinaryFile: remote file '/opt/topspin/prog/curdir/root/bsmserrormsg1.log' not available

2025-10-27 13:25:47.914   cmd=_create_drag_tranfer_handler
2025-10-27 13:25:47.924   cmd[1]=re /opt/nmrdata/data/zuser/nmr/f-MLF_3p2_250402/1/pdata/1
2025-10-27 13:25:48.009   cmd[1]=browse_update_last50
2025-10-27 13:25:48.011   cmd[1]=adddatadirautomaticwithcheck /opt/nmrdata/data/zuser/nmr
2025-10-27 13:25:48.036   cmd[1]=_create_drag_tranfer_handler
2025-10-27 13:25:48.038   Entered MODULE de.bruker.nmr.pr.disp.BasicNMRModule
2025-10-27 13:25:48.039   adddataset corbaloc:iiop:127.0.0.1:5505/NMRDataServer##%/opt/nmrdata/data/zuser/nmr/f-MLF_3p2_250402/1/pdata/1
2025-10-27 13:25:51.863   cmd[1]=edhead
2025-10-27 13:25:51.902   EdprobeEditor: HConfServer.getServer().getProperty(ACQUISITION_IN_PROGRESS)= NOT_LOCKED
2025-10-27 13:25:51.902   EdprobeEditor: setViewMode = false
2025-10-27 13:26:15.518   Probe changed
2025-10-27 13:26:15.654   VTC_VT_GAS_SLOPE_LIMIT set to 50.0 lph/s
2025-10-27 13:26:15.674   MAS probe changed
2025-10-27 13:26:16.019   Get LIFTMODE
2025-10-27 13:26:16.020   Probe changed, no CRP probe
2025-10-27 13:26:16.021   Probe changed: LIFTMODE: 0
2025-10-27 13:26:16.055   Error getting optical rotor detection: Error in getParameters reported by ProbeServer:
Installed probe is not an ATMA probe!
2025-10-27 13:26:16.106   BasicSampleChanger MAS configuration: false, false
2025-10-27 13:26:16.130   flip with ATMA, isIProbe: false, isMasProbe: true, flipWithATMA: false, result: false
2025-10-27 13:26:29.874   edasp: resetting auto_default
2025-10-27 13:26:29.880   You need to run expinstall to apply modifications you made.
2025-10-27 13:26:29.993   getHconfServerLocal started local.
2025-10-27 13:26:29.997   external cmd from "CPR": "index_datasets /opt/topspin4.4.0/conf/instr/remote_spect/probeheads" on "/UndefinedDir/UndefinedName/1/pdata/1", option="-2"
2025-10-27 13:26:29.997   cmd[1]=index_datasets /opt/topspin4.4.0/conf/instr/remote_spect/probeheads
2025-10-27 13:26:34.920   Elevation for right Administrate Spectrometer Configuration for command null successful
2025-10-27 13:26:44.674   cmd[1]=mons
2025-10-27 13:26:47.415   cmd[1]=mons
2025-10-27 13:26:47.417   cmd[1]=monpdu
2025-10-27 13:26:47.418   cmd[1]=monmas
2025-10-27 13:26:47.419   cmd[1]=monautodiag
2025-10-27 13:26:47.419   cmd[1]=montime
2025-10-27 13:26:47.420   cmd[1]=monspooler
2025-10-27 13:26:47.421   cmd[1]=montemp
2025-10-27 13:26:47.421   cmd[1]=monpowindicator
2025-10-27 13:26:47.422   cmd[1]=monbsmstemp
2025-10-27 13:26:47.423   cmd[1]=monIndicator
2025-10-27 13:26:47.424   cmd[1]=monacq
2025-10-27 13:26:47.425   cmd[1]=monacb
2025-10-27 13:26:47.427   cmd[1]=monadc
2025-10-27 13:26:47.429   cmd[1]=monIndicatorRun
2025-10-27 13:26:47.430   cmd[1]=monacqrun
2025-10-27 13:26:47.431   cmd[1]=monacbrun
2025-10-27 13:26:56.558   cmd[1]=vtudisp
2025-10-27 13:26:56.567   cmd[1]=_create_drag_tranfer_handler
2025-10-27 13:26:57.285   Storage type: 0
2025-10-27 13:26:57.776   cmd[1]=_create_drag_tranfer_handler
2025-10-27 13:26:57.780   Entered MODULE de.bruker.nmr.sc.util.Graphics$GraphicsModule
2025-10-27 13:26:57.780   adddataset VTC_REG_TEMP_CH1
2025-10-27 13:26:57.783   adddataset VTC_TARG_TEMP_CH1
2025-10-27 13:26:57.794   cmd[1]=_create_drag_tranfer_handler
2025-10-27 13:26:57.794   Entered MODULE de.bruker.nmr.sc.util.Graphics$GraphicsModule
2025-10-27 13:26:57.794   adddataset VTC_ACT_POW_CH1
2025-10-27 13:26:57.795   adddataset VTC_MAX_POW_CH1
2025-10-27 13:26:57.801   cmd[1]=_create_drag_tranfer_handler
2025-10-27 13:26:57.801   Entered MODULE de.bruker.nmr.sc.util.Graphics$GraphicsModule
2025-10-27 13:26:57.801   adddataset VTC_MEASURED_GASFLOW
2025-10-27 13:26:57.802   adddataset VTC_OPERATE_GASFLOW
2025-10-27 13:27:15.783   cmd[1]=edhead
2025-10-27 13:27:15.812   EdprobeEditor: HConfServer.getServer().getProperty(ACQUISITION_IN_PROGRESS)= NOT_LOCKED
2025-10-27 13:27:15.813   EdprobeEditor: setViewMode = false
2025-10-27 13:27:41.682   external cmd from "CPR": "index_datasets /opt/topspin4.4.0/conf/instr/remote_spect/probeheads" on "/UndefinedDir/UndefinedName/1/pdata/1", option="-2"
2025-10-27 13:27:41.683   cmd[1]=index_datasets /opt/topspin4.4.0/conf/instr/remote_spect/probeheads
2025-10-27 13:27:50.831   cmd[1]=pdudisp
2025-10-27 13:27:53.548   Elevation for right Administrate Spectrometer Configuration for command null successful
2025-10-27 13:28:49.054   cmd[1]=ae
2025-10-27 13:28:49.063   cmd[1]=xmac ae 
2025-10-27 13:28:49.071   cmd[1]=_show_stat
2025-10-27 13:28:50.580   cmd[1]=ased __WAITSTART__w__WAITEND__
2025-10-27 13:28:50.589   cmd[1]=isNmr
2025-10-27 13:28:50.592   cmd[1]=__ased
2025-10-27 13:28:50.593   cmd[1]=_show_stat
2025-10-27 13:28:50.596   sendAllCmds: sendCommand ased  on: /opt/nmrdata/data/zuser/nmr/f-MLF_3p2_250402/1/pdata/1
2025-10-27 13:28:50.712   keep alive thread started
2025-10-27 13:28:50.994   waitForEndOfCmd: command not running anymore
2025-10-27 13:28:50.994   command ased terminated
2025-10-27 13:28:50.995   sendCommand: exitStatus for command ased:noError
2025-10-27 13:28:50.996   sendAllCmds: command finished: 0
2025-10-27 13:29:14.894   cmd[1]=edhead
2025-10-27 13:29:14.923   EdprobeEditor: HConfServer.getServer().getProperty(ACQUISITION_IN_PROGRESS)= NOT_LOCKED
2025-10-27 13:29:14.924   EdprobeEditor: setViewMode = false
2025-10-27 13:29:28.603   external cmd from "CPR": "index_datasets /opt/topspin4.4.0/conf/instr/remote_spect/probeheads" on "/UndefinedDir/UndefinedName/1/pdata/1", option="-2"
2025-10-27 13:29:28.603   cmd[1]=index_datasets /opt/topspin4.4.0/conf/instr/remote_spect/probeheads
2025-10-27 13:29:37.398   cmd[1]=pdudisp
2025-10-27 13:29:39.971   Elevation for right Administrate Spectrometer Configuration for command null successful
2025-10-27 13:29:43.823   new PDU message: 3=2025-10-27 12:29:43.390: Spectrometer is shutting down...
2025-10-27 13:29:43.824   cmd[1]=communicationfailure REBOOT
2025-10-27 13:29:43.826   Communication failure, reason: REBOOT
2025-10-27 13:29:43.854   new PDU message: 13=2025-10-27 12:29:43.421: Device Acquisition Server 1: Shutting down...
2025-10-27 13:29:43.855   new PDU message: 13=2025-10-27 12:29:43.422: Device Acquisition Server 1: is ready for shut down...
2025-10-27 13:29:43.877   Communication failure: shimSoftStartAndShutdownDurationInSeconds = 20
2025-10-27 13:29:43.958   new PDU message: 13=2025-10-27 12:29:43.526: Device Acquisition Server 1: Shutting down takes approximately 3s.
2025-10-27 13:29:43.960   new PDU message: 11=2025-10-27 12:29:43.526: Device Acquisition Server 1: shut down complete!
2025-10-27 13:29:43.960   new PDU message: 13=2025-10-27 12:29:43.526: Device BSMS 2: Shutting down...
2025-10-27 13:29:43.961   new PDU message: 13=2025-10-27 12:29:43.526: Device BSMS 2: does not exist, ignoring BSMS 2!
2025-10-27 13:29:43.961   new PDU message: 13=2025-10-27 12:29:43.526: Device BSMS 1: Shutting down...
2025-10-27 13:29:43.961   new PDU message: 13=2025-10-27 12:29:43.526: Device BSMS 1: is ready for shut down...
2025-10-27 13:29:44.209   new PDU message: 13=2025-10-27 12:29:43.774: Device BSMS 1: Shutting down takes approximately 90s.
2025-10-27 13:29:44.273   new PDU message: 13=2025-10-27 12:29:43.841: Device BSMS 1: Ramp down duration for shims is 20 seconds.
2025-10-27 13:29:44.324   new PDU message: 13=2025-10-27 12:29:43.891: Device BSMS 1: Status: shutting down...
2025-10-27 13:29:50.067   new PDU message: 13=2025-10-27 12:29:49.634: Device BSMS 1: Status: shutting down...
2025-10-27 13:29:55.857   new PDU message: 13=2025-10-27 12:29:55.424: Device BSMS 1: Status: shutting down...
2025-10-27 13:30:01.743   new PDU message: 13=2025-10-27 12:30:01.311: Device BSMS 1: Status: shutting down...
2025-10-27 13:30:05.815   Waiting for BSMS to shut down, shut down duration : 50
2025-10-27 13:30:06.413   new PDU message: 11=2025-10-27 12:30:05.980: Device BSMS 1: shut down complete!
2025-10-27 13:30:06.413   new PDU message: 13=2025-10-27 12:30:05.980: Device PDU3: Shutting down...
2025-10-27 13:30:06.415   new PDU message: 13=2025-10-27 12:30:05.983: Device PDU3: is ready for shut down...
2025-10-27 13:30:06.417   new PDU message: 13=2025-10-27 12:30:05.984: Switching off power outlet 2 ...
2025-10-27 13:30:06.432   new PDU message: 11=2025-10-27 12:30:05.999: Power outlet 2: Done!
2025-10-27 13:30:09.432   new PDU message: 13=2025-10-27 12:30:09.000: Switching off power outlet 3 ...
2025-10-27 13:30:09.447   new PDU message: 11=2025-10-27 12:30:09.015: Power outlet 3: Done!
2025-10-27 13:30:12.448   new PDU message: 13=2025-10-27 12:30:12.015: Switching off power outlet 4 ...
2025-10-27 13:30:12.463   new PDU message: 11=2025-10-27 12:30:12.031: Power outlet 4: Done!
2025-10-27 13:30:15.463   new PDU message: 13=2025-10-27 12:30:15.031: Switching off power outlet 5 ...
2025-10-27 13:30:15.479   new PDU message: 11=2025-10-27 12:30:15.047: Power outlet 5: Done!
2025-10-27 13:30:18.479   new PDU message: 13=2025-10-27 12:30:18.047: Switching off power outlet 6 ...
2025-10-27 13:30:18.494   new PDU message: 11=2025-10-27 12:30:18.062: Power outlet 6: Done!
2025-10-27 13:30:21.494   new PDU message: 13=2025-10-27 12:30:21.062: Switching off power outlet 7 ...
2025-10-27 13:30:21.510   new PDU message: 11=2025-10-27 12:30:21.078: Power outlet 7: Done!
2025-10-27 13:30:24.510   new PDU message: 13=2025-10-27 12:30:24.078: Switching off power outlet 8 ...
2025-10-27 13:30:24.525   new PDU message: 11=2025-10-27 12:30:24.093: Power outlet 8: Done!
2025-10-27 13:30:27.526   new PDU message: 13=2025-10-27 12:30:27.094: Device PDU3: Shutting down takes approximately 3s.
2025-10-27 13:30:27.543   new PDU message: 11=2025-10-27 12:30:27.111: Device PDU3: shut down complete!
2025-10-27 13:30:27.543   new PDU message: 13=2025-10-27 12:30:27.111: Device PDU2: Shutting down...
2025-10-27 13:30:27.545   new PDU message: 13=2025-10-27 12:30:27.113: Device PDU2: is ready for shut down...
2025-10-27 13:30:27.547   new PDU message: 13=2025-10-27 12:30:27.115: Switching off power outlet 2 ...
2025-10-27 13:30:27.562   new PDU message: 11=2025-10-27 12:30:27.130: Power outlet 2: Done!
2025-10-27 13:30:30.562   new PDU message: 13=2025-10-27 12:30:30.130: Switching off power outlet 3 ...
2025-10-27 13:30:30.577   new PDU message: 11=2025-10-27 12:30:30.145: Power outlet 3: Done!
2025-10-27 13:30:33.577   new PDU message: 13=2025-10-27 12:30:33.145: Switching off power outlet 4 ...
2025-10-27 13:30:33.592   new PDU message: 11=2025-10-27 12:30:33.161: Power outlet 4: Done!
2025-10-27 13:30:36.593   new PDU message: 13=2025-10-27 12:30:36.161: Switching off power outlet 5 ...
2025-10-27 13:30:36.608   new PDU message: 11=2025-10-27 12:30:36.176: Power outlet 5: Done!
2025-10-27 13:30:39.608   new PDU message: 13=2025-10-27 12:30:39.177: Switching off power outlet 6 ...
2025-10-27 13:30:39.624   new PDU message: 11=2025-10-27 12:30:39.192: Power outlet 6: Done!
2025-10-27 13:30:42.624   new PDU message: 13=2025-10-27 12:30:42.192: Switching off power outlet 7 ...
2025-10-27 13:30:42.639   new PDU message: 11=2025-10-27 12:30:42.207: Power outlet 7: Done!
2025-10-27 13:30:45.639   new PDU message: 13=2025-10-27 12:30:45.208: Switching off power outlet 8 ...
2025-10-27 13:30:45.654   new PDU message: 11=2025-10-27 12:30:45.223: Power outlet 8: Done!
2025-10-27 13:30:48.655   new PDU message: 13=2025-10-27 12:30:48.223: Device PDU2: Shutting down takes approximately 3s.
2025-10-27 13:30:48.672   new PDU message: 11=2025-10-27 12:30:48.240: Device PDU2: shut down complete!
2025-10-27 13:30:48.672   new PDU message: 13=2025-10-27 12:30:48.240: Device PDU1: Shutting down...
2025-10-27 13:30:48.674   new PDU message: 13=2025-10-27 12:30:48.243: Device PDU1: is ready for shut down...
2025-10-27 13:30:48.676   new PDU message: 13=2025-10-27 12:30:48.244: Switching off power outlet 3 ...
2025-10-27 13:30:48.691   new PDU message: 11=2025-10-27 12:30:48.259: Power outlet 3: Done!
2025-10-27 13:30:51.691   new PDU message: 13=2025-10-27 12:30:51.259: Switching off power outlet 4 ...
2025-10-27 13:30:51.706   new PDU message: 11=2025-10-27 12:30:51.275: Power outlet 4: Done!
2025-10-27 13:30:54.707   new PDU message: 13=2025-10-27 12:30:54.275: Switching off power outlet 5 ...
2025-10-27 13:30:54.723   new PDU message: 11=2025-10-27 12:30:54.291: Power outlet 5: Done!
2025-10-27 13:30:55.815   BSMS is down.
2025-10-27 13:30:55.817   Waiting for BSMS to be "ON" again: shim start up duration = 100
2025-10-27 13:30:57.723   new PDU message: 13=2025-10-27 12:30:57.291: Switching off power outlet 6 ...
2025-10-27 13:30:57.739   new PDU message: 11=2025-10-27 12:30:57.307: Power outlet 6: Done!
2025-10-27 13:31:00.739   new PDU message: 13=2025-10-27 12:31:00.307: Switching off power outlet 7 ...
2025-10-27 13:31:00.754   new PDU message: 11=2025-10-27 12:31:00.322: Power outlet 7: Done!
2025-10-27 13:31:03.754   new PDU message: 13=2025-10-27 12:31:03.322: Switching off power outlet 8 ...
2025-10-27 13:31:03.769   new PDU message: 11=2025-10-27 12:31:03.338: Power outlet 8: Done!
2025-10-27 13:31:06.770   new PDU message: 13=2025-10-27 12:31:06.338: Device PDU1: Shutting down takes approximately 3s.
2025-10-27 13:31:06.785   new PDU message: 11=2025-10-27 12:31:06.353: Device PDU1: shut down complete!
2025-10-27 13:31:06.785   new PDU message: 13=2025-10-27 12:31:06.353: Device PDU Blade Outlet: Shutting down...
2025-10-27 13:31:06.787   new PDU message: 13=2025-10-27 12:31:06.355: Device PDU Blade Outlet: is ready for shut down...
2025-10-27 13:31:06.787   new PDU message: 13=2025-10-27 12:31:06.355: Device PDU Blade Outlet: Shutting down takes approximately 3s.
2025-10-27 13:31:06.787   new PDU message: 11=2025-10-27 12:31:06.355: Device PDU Blade Outlet: shut down complete!
2025-10-27 13:31:06.788   new PDU message: 13=2025-10-27 12:31:06.355: Device PDU Router Outlet: Shutting down...
2025-10-27 13:31:06.789   new PDU message: 13=2025-10-27 12:31:06.357: Device PDU Router Outlet: is ready for shut down...
2025-10-27 13:31:06.790   new PDU message: 13=2025-10-27 12:31:06.357: Device PDU Router Outlet: Shutting down takes approximately 3s.
2025-10-27 13:31:06.790   new PDU message: 11=2025-10-27 12:31:06.357: Device PDU Router Outlet: shut down complete!
2025-10-27 13:31:06.790   new PDU message: 13=2025-10-27 12:31:06.357: Device Blade: Shutting down...
2025-10-27 13:31:06.791   new PDU message: 13=2025-10-27 12:31:06.358: Device Blade: is ready for shut down...
2025-10-27 13:31:06.791   new PDU message: 4=2025-10-27 12:31:06.358: Spectrometer is waiting for shut down acknowledge...
2025-10-27 13:31:06.802   new PDU message: 5=2025-10-27 12:31:06.370: Spectrometer got shutdown acknowledge and is shutting down...
2025-10-27 13:31:11.402   Error in SuperVision StatusMessageFetcher thread : CheckRemoteserverVersion: Cannot contact restartserver2 on 149.236.99.9:
_narrow() failed:
check if restartserver2 process is running
2025-10-27 13:31:36.803   new PDU message: 101=Spectrometer off.
2025-10-27 13:31:36.804   new PDU message: 102=Rebooting, please wait...
2025-10-27 13:31:57.578   GojavaCorba::serverIsAlive:TRANSIENT: acquisition server not reachable: Retries exceeded, couldn't reconnect to 149.236.99.9:5618
2025-10-27 13:31:57.578   keep alive thread terminated
2025-10-27 13:32:35.817   Waiting for BSMS to be "ON" again: Is ON
2025-10-27 13:32:35.818   BSMS is ON, trying to reconnect....
2025-10-27 13:33:35.295   new PDU message: 2=2025-10-27 12:33:34.293: Spectrometer is starting up...
2025-10-27 13:33:35.295   new PDU message: 12=2025-10-27 12:33:34.293: Device Blade: Starting...
2025-10-27 13:33:35.295   new PDU message: 12=2025-10-27 12:33:34.293: Device Blade: is ready for start up...
2025-10-27 13:33:35.296   new PDU message: 12=2025-10-27 12:33:34.293: Device Blade: Starting up takes approximately 3s.
2025-10-27 13:33:35.296   new PDU message: 10=2025-10-27 12:33:34.293: Device Blade: running!
2025-10-27 13:33:35.296   new PDU message: 12=2025-10-27 12:33:34.293: Device PDU Router Outlet: Starting...
2025-10-27 13:33:35.296   new PDU message: 12=2025-10-27 12:33:34.296: Device PDU Router Outlet: is ready for start up...
2025-10-27 13:33:35.296   new PDU message: 12=2025-10-27 12:33:34.296: Switching on power outlet 1 ...
2025-10-27 13:33:35.296   new PDU message: 10=2025-10-27 12:33:34.307: Power outlet 1: Done!
2025-10-27 13:33:35.296   new PDU message: 12=2025-10-27 12:33:34.307: Device PDU Router Outlet: Starting up takes approximately 3s.
2025-10-27 13:33:35.296   new PDU message: 10=2025-10-27 12:33:34.309: Device PDU Router Outlet: running!
2025-10-27 13:33:35.297   new PDU message: 12=2025-10-27 12:33:34.309: Device PDU Blade Outlet: Starting...
2025-10-27 13:33:35.297   new PDU message: 12=2025-10-27 12:33:34.311: Device PDU Blade Outlet: is ready for start up...
2025-10-27 13:33:35.297   new PDU message: 12=2025-10-27 12:33:34.311: Device PDU Blade Outlet: Starting up takes approximately 3s.
2025-10-27 13:33:35.297   new PDU message: 10=2025-10-27 12:33:34.311: Device PDU Blade Outlet: running!
2025-10-27 13:33:35.297   new PDU message: 12=2025-10-27 12:33:34.311: Device PDU1: Starting...
2025-10-27 13:33:35.297   new PDU message: 12=2025-10-27 12:33:34.313: Device PDU1: is ready for start up...
2025-10-27 13:33:35.297   new PDU message: 12=2025-10-27 12:33:34.314: Switching on power outlet 3 ...
2025-10-27 13:33:35.297   new PDU message: 10=2025-10-27 12:33:34.317: Power outlet 3: Done!
2025-10-27 13:33:38.286   new PDU message: 12=2025-10-27 12:33:37.317: Switching on power outlet 4 ...
2025-10-27 13:33:38.300   new PDU message: 10=2025-10-27 12:33:37.332: Power outlet 4: Done!
2025-10-27 13:33:41.301   new PDU message: 12=2025-10-27 12:33:40.332: Switching on power outlet 5 ...
2025-10-27 13:33:41.328   new PDU message: 10=2025-10-27 12:33:40.360: Power outlet 5: Done!
2025-10-27 13:33:44.329   new PDU message: 12=2025-10-27 12:33:43.360: Switching on power outlet 6 ...
2025-10-27 13:33:44.346   new PDU message: 10=2025-10-27 12:33:43.378: Power outlet 6: Done!
2025-10-27 13:33:47.346   new PDU message: 12=2025-10-27 12:33:46.378: Switching on power outlet 7 ...
2025-10-27 13:33:47.361   new PDU message: 10=2025-10-27 12:33:46.392: Power outlet 7: Done!
2025-10-27 13:33:50.361   new PDU message: 12=2025-10-27 12:33:49.392: Switching on power outlet 8 ...
2025-10-27 13:33:50.375   new PDU message: 10=2025-10-27 12:33:49.406: Power outlet 8: Done!
2025-10-27 13:33:53.375   new PDU message: 12=2025-10-27 12:33:52.407: Device PDU1: Starting up takes approximately 3s.
2025-10-27 13:33:53.390   new PDU message: 10=2025-10-27 12:33:52.422: Device PDU1: running!
2025-10-27 13:33:53.393   new PDU message: 12=2025-10-27 12:33:52.422: Device PDU2: Starting...
2025-10-27 13:33:53.393   new PDU message: 12=2025-10-27 12:33:52.424: Device PDU2: is ready for start up...
2025-10-27 13:33:53.395   new PDU message: 12=2025-10-27 12:33:52.426: Switching on power outlet 2 ...
2025-10-27 13:33:53.408   new PDU message: 10=2025-10-27 12:33:52.440: Power outlet 2: Done!
2025-10-27 13:33:56.409   new PDU message: 12=2025-10-27 12:33:55.440: Switching on power outlet 3 ...
2025-10-27 13:33:56.423   new PDU message: 10=2025-10-27 12:33:55.454: Power outlet 3: Done!
2025-10-27 13:33:59.423   new PDU message: 12=2025-10-27 12:33:58.454: Switching on power outlet 4 ...
2025-10-27 13:33:59.437   new PDU message: 10=2025-10-27 12:33:58.468: Power outlet 4: Done!
2025-10-27 13:34:02.437   new PDU message: 12=2025-10-27 12:34:01.469: Switching on power outlet 5 ...
2025-10-27 13:34:02.451   new PDU message: 10=2025-10-27 12:34:01.483: Power outlet 5: Done!
2025-10-27 13:34:05.451   new PDU message: 12=2025-10-27 12:34:04.483: Switching on power outlet 6 ...
2025-10-27 13:34:05.465   new PDU message: 10=2025-10-27 12:34:04.497: Power outlet 6: Done!
2025-10-27 13:34:08.466   new PDU message: 12=2025-10-27 12:34:07.497: Switching on power outlet 7 ...
2025-10-27 13:34:08.480   new PDU message: 10=2025-10-27 12:34:07.512: Power outlet 7: Done!
2025-10-27 13:34:11.480   new PDU message: 12=2025-10-27 12:34:10.512: Switching on power outlet 8 ...
2025-10-27 13:34:11.494   new PDU message: 10=2025-10-27 12:34:10.526: Power outlet 8: Done!
2025-10-27 13:34:14.494   new PDU message: 12=2025-10-27 12:34:13.526: Device PDU2: Starting up takes approximately 3s.
2025-10-27 13:34:14.511   new PDU message: 10=2025-10-27 12:34:13.543: Device PDU2: running!
2025-10-27 13:34:14.513   new PDU message: 12=2025-10-27 12:34:13.543: Device PDU3: Starting...
2025-10-27 13:34:14.514   new PDU message: 12=2025-10-27 12:34:13.545: Device PDU3: is ready for start up...
2025-10-27 13:34:14.516   new PDU message: 12=2025-10-27 12:34:13.547: Switching on power outlet 2 ...
2025-10-27 13:34:14.529   new PDU message: 10=2025-10-27 12:34:13.561: Power outlet 2: Done!
2025-10-27 13:34:17.529   new PDU message: 12=2025-10-27 12:34:16.561: Switching on power outlet 3 ...
2025-10-27 13:34:17.544   new PDU message: 10=2025-10-27 12:34:16.576: Power outlet 3: Done!
2025-10-27 13:34:20.544   new PDU message: 12=2025-10-27 12:34:19.576: Switching on power outlet 4 ...
2025-10-27 13:34:20.558   new PDU message: 10=2025-10-27 12:34:19.590: Power outlet 4: Done!
2025-10-27 13:34:23.558   new PDU message: 12=2025-10-27 12:34:22.590: Switching on power outlet 5 ...
2025-10-27 13:34:23.573   new PDU message: 10=2025-10-27 12:34:22.605: Power outlet 5: Done!
2025-10-27 13:34:26.573   new PDU message: 12=2025-10-27 12:34:25.605: Switching on power outlet 6 ...
2025-10-27 13:34:26.587   new PDU message: 10=2025-10-27 12:34:25.619: Power outlet 6: Done!
2025-10-27 13:34:29.588   new PDU message: 12=2025-10-27 12:34:28.620: Switching on power outlet 7 ...
2025-10-27 13:34:29.602   new PDU message: 10=2025-10-27 12:34:28.634: Power outlet 7: Done!
2025-10-27 13:34:32.603   new PDU message: 12=2025-10-27 12:34:31.635: Switching on power outlet 8 ...
2025-10-27 13:34:32.631   new PDU message: 10=2025-10-27 12:34:31.663: Power outlet 8: Done!
2025-10-27 13:34:35.631   new PDU message: 12=2025-10-27 12:34:34.663: Device PDU3: Starting up takes approximately 3s.
2025-10-27 13:34:35.651   new PDU message: 10=2025-10-27 12:34:34.683: Device PDU3: running!
2025-10-27 13:34:35.654   new PDU message: 12=2025-10-27 12:34:34.683: Device BSMS 1: Starting...
2025-10-27 13:34:35.737   new PDU message: 12=2025-10-27 12:34:34.769: Device BSMS 1: is ready for start up...
2025-10-27 13:34:35.739   new PDU message: 12=2025-10-27 12:34:34.769: Device BSMS 1: getting shim start up duration, which may take up to 45 seconds ...
2025-10-27 13:36:47.409   Initializing coil temperature values
2025-10-27 13:36:47.454   new PDU message: 12=2025-10-27 12:36:46.487: Device BSMS 1: Starting up takes approximately 90s.
2025-10-27 13:36:47.494   Reconnected to BSMS.
2025-10-27 13:36:47.497   Communication reset done
2025-10-27 13:36:47.497   cmd[1]=bsmsdisp
2025-10-27 13:36:47.504   cmd[1]=_create_drag_tranfer_handler
2025-10-27 13:36:47.919   new PDU message: 12=2025-10-27 12:36:46.953: Device BSMS 1: Ramp up duration for shims is 20 seconds.
2025-10-27 13:36:47.919   new PDU message: 12=2025-10-27 12:36:46.953: Device BSMS 1: getting shim start up duration, which may take up to 45 seconds ...
2025-10-27 13:36:48.743   new PDU message: 10=2025-10-27 12:36:47.777: Device BSMS 1: Status: running!
2025-10-27 13:36:48.744   new PDU message: 10=2025-10-27 12:36:47.777: Device BSMS 1: running!
2025-10-27 13:36:48.744   new PDU message: 12=2025-10-27 12:36:47.777: Device BSMS 2: Starting...
2025-10-27 13:36:48.745   new PDU message: 12=2025-10-27 12:36:47.777: Device BSMS 2: does not exist, ignoring BSMS 2!
2025-10-27 13:36:48.746   new PDU message: 12=2025-10-27 12:36:47.777: Device Acquisition Server 1: Starting...
2025-10-27 13:36:48.746   new PDU message: 12=2025-10-27 12:36:47.777: Device Acquisition Server 1: is ready for start up...
2025-10-27 13:36:48.746   new PDU message: 12=2025-10-27 12:36:47.777: Device Acquisition Server 1: Starting up takes approximately 3s.
2025-10-27 13:36:48.746   new PDU message: 10=2025-10-27 12:36:47.777: Device Acquisition Server 1: running!
2025-10-27 13:36:48.746   new PDU message: 0=2025-10-27 12:36:47.777: Spectrometer is running!
2025-10-27 13:36:51.111   Server error in writeRemoteFileToLocalDisk:
Cannot set file permissions:
IDL:bruker.de/common/NotAvailable:1.0
getChunkFromBinaryFile: remote file '/opt/topspin/prog/curdir/root/bsmserrormsg1.log' not available

2025-10-27 13:43:00.293   cmd[1]=.dopt acqstatbar
2025-10-27 13:43:00.295   cmd[1]=set acqstatbar
2025-10-27 13:43:00.312   cmd[1]=_probe_with_temperature_sensor
2025-10-27 13:43:00.314   cmd[1]=_probe_with_temperature_sensor
2025-10-27 13:43:00.315   cmd[1]=_set_title SET_MON_TITLE
2025-10-27 13:43:00.319   cmd[1]=_set_monitor SPOOLER SET_MON_SPOOLER
2025-10-27 13:43:00.322   cmd[1]=_set_monitor TIME SET_MON_TIME
2025-10-27 13:43:00.323   cmd[1]=_set_monitor TE SET_MON_TE
2025-10-27 13:43:00.324   cmd[1]=_set_monitor TEA SET_MON_TEA
2025-10-27 13:43:00.324   cmd[1]=_set_monitor FID SET_MON_FID
2025-10-27 13:43:00.325   cmd[1]=_set_monitor ACQ SET_MON_ACQ
2025-10-27 13:43:00.326   cmd[1]=_set_monitor LOCK SET_MON_LOCK
2025-10-27 13:43:00.327   cmd[1]=_set_monitor MAS SET_MON_MAS
2025-10-27 13:43:00.328   cmd[1]=_set_monitor POWCHK SET_MON_POWCHK
2025-10-27 13:43:00.329   cmd[1]=_set_monitor BSMS SET_MON_BSMS
2025-10-27 13:43:00.329   cmd[1]=_set_monitor BSMSTEMP SET_MON_BSMSTEMP
2025-10-27 13:43:00.330   cmd[1]=_set_monitor BSMS_STATUS SET_MON_BSMS_STATUS
2025-10-27 13:43:00.331   cmd[1]=_set_monitor AMBIENT_FLUX SET_MON_AMBIENT_FLUX
2025-10-27 13:43:00.332   cmd[1]=_set_monitor PDU SET_MON_PDU
2025-10-27 13:43:00.333   cmd[1]=_set_monitor AUTODIAG SET_MON_AUTODIAG
2025-10-27 13:43:00.333   cmd[1]=_set_monitor BORE SET_MON_BORE
2025-10-27 13:43:00.335   cmd[1]=_set_monitor ACB SET_MON_ACB
2025-10-27 13:43:00.336   cmd[1]=_set_monitor ADC SET_MON_ADC
2025-10-27 13:43:05.109   cmd[1]=mons
2025-10-27 13:43:07.157   cmd[1]=mons
2025-10-27 13:43:07.158   cmd[1]=monpdu
2025-10-27 13:43:07.159   cmd[1]=monmas
2025-10-27 13:43:07.160   cmd[1]=monbsmstemp
2025-10-27 13:43:07.161   cmd[1]=monIndicator
2025-10-27 13:43:07.161   cmd[1]=monacq
2025-10-27 13:43:07.162   cmd[1]=monacb
2025-10-27 13:43:07.163   cmd[1]=monIndicatorRun
2025-10-27 13:43:07.163   cmd[1]=monadc
2025-10-27 13:43:07.165   cmd[1]=monacqrun
2025-10-27 13:43:07.166   cmd[1]=monautodiag
2025-10-27 13:43:07.167   cmd[1]=montime
2025-10-27 13:43:07.168   cmd[1]=monspooler
2025-10-27 13:43:07.169   cmd[1]=montemp
2025-10-27 13:43:07.169   cmd[1]=monpowindicator
2025-10-27 13:43:07.262   cmd[1]=monacbrun
2025-10-27 13:43:13.460   cmd[1]=exit
2025-10-27 13:43:13.461   cmd[1]=acqurunning
2025-10-27 13:43:13.464   cmd[1]=_is_indexing_running
2025-10-27 13:43:13.492   to CPR: "show status" [id 19], COMMAND_WAIT_TERM
2025-10-27 13:43:13.495   CPR task 19 resumed normally, termstat=0
2025-10-27 13:43:13.495   exit: parsing cprstatus file for list of clients
2025-10-27 13:43:13.499   exit: checking for other clients
2025-10-27 13:43:13.970   switched to datastation or shutting down application, stop SuperVision StatusMessageFetcher thread 
2025-10-27 13:43:15.047   exit: regular shutdown initiated.
2025-10-27 13:43:15.047   exit: tear down remote acquisition servers
2025-10-27 13:43:20.304   allDatasetsMap entry removed, family: PARAM_EDAS, /opt/nmrdata/data/zuser/nmr/f-MLF_3p2_250402/1
2025-10-27 13:43:20.317   new PDU message: 99=
2025-10-27 13:43:20.317   exit: ORB is down.

  2025-10-27
---------------
2025-10-27 13:43:28.390   java.io.FileNotFoundException : Can't read sample list cache from /srv/Bruker/TopSpin/sampleList.json
2025-10-27 13:43:29.416   Graphical User Interface started.
2025-10-27 13:43:29.420   Operating system = LINUX, JVM type (bit) = 64

2025-10-27 13:43:29.420   User properties directory=/home/nmrafd/.topspin1/prop
2025-10-27 13:43:30.093   cmd=_create_drag_tranfer_handler
2025-10-27 13:43:30.329   initCprCom: opening file for local session key at '/opt/topspin4.4.0/prog/curdir/nmrafd/keystore/localSession.key'
2025-10-27 13:43:30.329   initCprCom: local session key imported successfully.
2025-10-27 13:43:30.331   initCprCom: GUI session key created
2025-10-27 13:43:30.332   cmd=init_cpr
2025-10-27 13:43:30.334   Start ORB: recommended port=5650.
2025-10-27 13:43:30.373   Start ORB: successful on port 5650
2025-10-27 13:43:30.373   cmd=cprlistener
2025-10-27 13:43:30.375   Start CprListenerServer: activate.
2025-10-27 13:43:30.396   Start CprListenerServer: activation successful, id = corbaloc:iiop:127.0.0.1:5650/8225277029/CtrlPOA/CPRClient, localized id = corbaloc:iiop:127.0.0.1:5650/8225277029/CtrlPOA/CPRClient
2025-10-27 13:43:30.574   Contact configuration service: URL=corbaloc:iiop:132.229.121.105:5500/ConfigurationServer, IOR=IOR:010000002400000049444c3a6272756b65722e64652f6370722f436f6e66696775726174696f6e3a312e3000010000000000000084000000010102000a0000003132372e302e302e31007c1513000000436f6e66696775726174696f6e536572766572000300000000000000080000000100000000545441010000001c000000010000000100010001000000010001050901010001000000090101000300000018000000010000000d0000003134392e3233362e39392e3100007c15
2025-10-27 13:43:30.575   Contact configuration service: local contact, using URL: corbaloc:iiop:127.0.0.1:5500/ConfigurationServer
2025-10-27 13:43:30.602   Contact configuration service: successful.
2025-10-27 13:43:30.602   Contact configuration service: local session, authentication done.
2025-10-27 13:43:30.609   Contact CPR: local contact, narrowing object for: corbaloc:iiop:127.0.0.1:5500/CPRMsg, IOR=IOR:010000001d00000049444c3a6272756b65722e64652f6370722f4350524d73673a312e3000000000010000000000000078000000010102000a0000003132372e302e302e31007c15060000004350524d736700000300000000000000080000000100000000545441010000001c000000010000000100010001000000010001050901010001000000090101000300000018000000010000000d0000003134392e3233362e39392e3100007c15
2025-10-27 13:43:30.612   Contact CPR: object is valid.
2025-10-27 13:43:30.613   Contact CPR: address of CprListener is corbaloc:iiop:127.0.0.1:5650/8225277029/CtrlPOA/CPRClient
2025-10-27 13:43:30.613   Contact CPR: login at CPR with "corbaloc:iiop:127.0.0.1:5650/8225277029/CtrlPOA/CPRClient"
2025-10-27 13:43:30.865   Contact CPR: attempt #0 to get assigned client id...
2025-10-27 13:43:30.865   Contact CPR: successful, got id '1'.
2025-10-27 13:43:30.866   CPR connection successful, client id = 1
2025-10-27 13:43:30.891   Start dataserver: launching command, waiting on result
2025-10-27 13:43:30.891   Start dataserver: getting current address
2025-10-27 13:43:31.026   Start dataserver: URL=corbaloc:iiop:132.229.121.105:5505/NMRDataServer, IOR=IOR:010000002800000049444c3a6272756b65722e64652f646174612f4469736346756e6350726f76696465723a312e300001000000000000009800000001010200100000003133322e3232392e3132312e3130350081150000110000004e4d5244617461536572766572312e31300000000400000000000000080000000100000000545441010000001c000000010000000100010001000000010001050901010001000000090101000300000014000000010000000a0000003132372e302e302e310081151400000008000000010066006600b315
2025-10-27 13:43:31.027   Start dataserver: local contact, using URL: corbaloc:iiop:127.0.0.1:5505/NMRDataServer
2025-10-27 13:43:31.036   Start dataserver: path to logfile is "/opt/topspin4.4.0/prog/curdir/nmrafd/stdout.NMRDataServer1.log"
2025-10-27 13:43:31.036   Start dataserver: successful.
2025-10-27 13:43:31.038   cmd=_show_lic
2025-10-27 13:43:31.041   getLicense called: attribute
2025-10-27 13:43:31.051   to CPR: "checkout_license verbose attribute" [id 1], COMMAND_WAIT_TERM
2025-10-27 13:43:31.054   external cmd from "CPR": "lic_attribute" on "", option="-2"
2025-10-27 13:43:31.055   cmd=lic_attribute
2025-10-27 13:43:31.057   License type: 
2025-10-27 13:43:31.058   getAttribute called: 0
2025-10-27 13:43:31.058   wait for license attribute
2025-10-27 13:43:31.058   get license attribute finished
2025-10-27 13:43:31.061   CPR task 1 resumed normally, termstat=0
2025-10-27 13:43:31.260   try RestartClient: serverAddress: corbaloc:iiop:127.0.0.1:5520/restartserver2
2025-10-27 13:43:31.267   RestartClient: serverAddress is valid!
2025-10-27 13:43:31.388   cmd=_set_cprhist
2025-10-27 13:43:31.473   to CPR: "get_version_info -info 1761569011472" [id 2], COMMAND_WAIT_START
2025-10-27 13:43:31.479   fromCPR loadAlert id = 0 message = ~~~~~1761569011472 TopSpin 4.4.0
2025-10-27 13:43:31.480   CPR task 2 resumed normally, termstat=0
2025-10-27 13:43:31.481   GUI Version = TopSpin 4.4.0 / local
2025-10-27 13:43:31.639   com.bruker.bio.nmrdatasearch.api.invoker.ApiException : Communication with NMR Search Backend failed. Trying again. Cause:
java.net.ConnectException: Failed to connect to localhost/0:0:0:0:0:0:0:1:8080
2025-10-27 13:43:39.109   cmd=configuretopspin
2025-10-27 13:43:39.111   configureTopSpin: entered
2025-10-27 13:43:39.112   configureTopSpin: try to set permanent lock
2025-10-27 13:43:39.121   configureTopSpin: successfully set permanent lock
2025-10-27 13:43:39.124   Installation configured with curinst: Avance NEO at IP 149.236.99.9
2025-10-27 13:43:39.137   try RestartClient: serverAddress: corbaloc:iiop:149.236.99.9:5520/restartserver2
2025-10-27 13:43:39.141   RestartClient: serverAddress is valid!
2025-10-27 13:43:39.842   LOCKCONF, SamChgEth[0-3], PduEth, LDUETH [DLM, no, no, no, no, 192.168.99.99, no]
2025-10-27 13:43:39.865   ValueLine config FALSE
2025-10-27 13:43:39.869   getLicense called: 1021040000:TOPSPIN_NMRPT
2025-10-27 13:43:39.870   to CPR: "checkout_license verbose 1021040000:TOPSPIN_NMRPT" [id 3], COMMAND_WAIT_TERM
2025-10-27 13:43:39.880   external cmd from "CPR": "lic_error CodeMeter checkout(1021040000:TOPSPIN_NMRPT) at 13:43:39.871 failed
No matching license entry found for feature "1021040000:TOPSPIN_NMRPT" .
CmContainer Entry not found, Error 200.This information is now cached until TopSpin restart.
" on "/UndefinedDir/UndefinedName/1/pdata/1", option="-2"
2025-10-27 13:43:39.880   cmd=lic_error CodeMeter checkout(1021040000:TOPSPIN_NMRPT) at 13:43:39.871 failed
No matching license entry found for feature "1021040000:TOPSPIN_NMRPT" .
CmContainer Entry not found, Error 200.This information is now cached until TopSpin restart.
2025-10-27 13:43:39.881   receiveLicenseErrorFromCpr called
2025-10-27 13:43:39.881   receiveLicenseErrorFromCpr called: CodeMeter checkout(1021040000:TOPSPIN_NMRPT) at 13:43:39.871 failed
No matching license entry found for feature "1021040000:TOPSPIN_NMRPT" .
CmContainer Entry not found, Error 200.This information is now cached until TopSpin restart.
2025-10-27 13:43:39.881   CPR task 3 resumed normally, termstat=-1
2025-10-27 13:43:39.882   getLicense called: -1
2025-10-27 13:43:39.882   getLastError called: CodeMeter checkout(1021040000:TOPSPIN_NMRPT) at 13:43:39.871 failed
No matching license entry found for feature "1021040000:TOPSPIN_NMRPT" .
CmContainer Entry not found, Error 200.This information is now cached until TopSpin restart.
2025-10-27 13:43:39.882   getLicense called, error: CodeMeter checkout(1021040000:TOPSPIN_NMRPT) at 13:43:39.871 failed
No matching license entry found for feature "1021040000:TOPSPIN_NMRPT" .
CmContainer Entry not found, Error 200.This information is now cached until TopSpin restart.
2025-10-27 13:43:39.883   License for product code 1021040000:TOPSPIN_NMRPT valid: [false]
2025-10-27 13:43:39.883   getLicense called: 1021091000:TOPSPIN_DEVCLASS_NEO
2025-10-27 13:43:39.883   to CPR: "checkout_license verbose 1021091000:TOPSPIN_DEVCLASS_NEO" [id 4], COMMAND_WAIT_TERM
2025-10-27 13:43:39.901   CPR task 4 resumed normally, termstat=0
2025-10-27 13:43:39.901   getLicense called: 0
2025-10-27 13:43:39.901   License for product code 1021091000:TOPSPIN_DEVCLASS_NEO valid: [true]
2025-10-27 13:43:39.914   Datastation: false, ELCB: true, EVTU: true, BACSAIR: true, MAS Unit: true, VTU: false,
                      Prodigy: false, AVNeo: true, MiniSpec: false, Fourier: false, Multi-receiver: true, number of receivers: 3,
                      Multipeak lock: true, NMR thermometer: false, 19F lock: false, Sample changer: false,
                      Lock: true, SoftLock: false, GradientAmplifiers: true,
                      isCoreLine: false, hasSCU: true, spectrometerLicense: TOPSPIN_DEVCLASS_NEO , LT-MAS type: 0
2025-10-27 13:43:40.025   FidDataServer0 successfully started
2025-10-27 13:43:40.136   FidDataServer1 successfully started
2025-10-27 13:43:40.251   FidDataServer2 successfully started
2025-10-27 13:43:40.254   cmd=startwatcher
2025-10-27 13:43:40.254   cmd=startsoapmassettingsserver
2025-10-27 13:43:40.255   cmd=setendpointsformas
2025-10-27 13:43:40.255   cmd=setendpointsforltmas
2025-10-27 13:43:40.256   Trying to start SOAPMasSettingsServer
2025-10-27 13:43:40.257   Do not publish
2025-10-27 13:43:40.259   cmd=configurebasicsamplechangerformas
2025-10-27 13:43:40.260   cmd=startsoapvtuserver
2025-10-27 13:43:40.260   cmd=startmassercuritysupervisor
2025-10-27 13:43:40.261   cmd=startbsmsserver
2025-10-27 13:43:40.262   Trying to start SOAPVTUServer
2025-10-27 13:43:40.266   Start BsmsServer
2025-10-27 13:43:40.271   Try to get EPU Ip address : 149.236.99.9
2025-10-27 13:43:40.271   sendGUIrestarted 
2025-10-27 13:43:40.272   entering sendGUIrestarted 
2025-10-27 13:43:40.276   sendGUIrestarted 
2025-10-27 13:43:40.276   entering sendGUIrestarted 
2025-10-27 13:43:40.331   sendGUIrestarted 
2025-10-27 13:43:40.331   entering sendGUIrestarted 
2025-10-27 13:43:40.337   BasicSampleChanger start arguments: ipAddress=192.168.99.100 identPort=80,10000 logFileName=stdout.BasicSampleChangerServer.log logFileSize=104857600 restartServerIpAddress=192.168.99.100 restartServerPort=5520 nmrSystemType=avance
2025-10-27 13:43:40.343   switched to real spectrometer and no shutdown in progress, start SuperVision StatusMessageFetcher thread 
2025-10-27 13:43:40.349   configureTopSpin: finished successfully...
2025-10-27 13:43:40.353   Initializing coil temperature values
2025-10-27 13:43:40.359   Cannot get maintenance status of instrument: com.bruker.pmw.client.invoker.ApiException: java.net.ConnectException: Failed to connect to localhost/0:0:0:0:0:0:0:1:8080
2025-10-27 13:43:40.381   getHconfServer started remote.
2025-10-27 13:43:40.381   getHconfServer started remote.
2025-10-27 13:43:40.383   Start BsmsServer: activation successful, id: corbaloc:iiop:149.236.99.1:5650/8225277029/CtrlPOA/BsmsServer
2025-10-27 13:43:40.400   Trying to start SOAPProbeServer
2025-10-27 13:43:40.436   BasicSampleChanger start arguments: ipAddress=192.168.99.100 identPort=80,10000 logFileName=stdout.BasicSampleChangerServer.log logFileSize=104857600 restartServerIpAddress=192.168.99.100 restartServerPort=5520 nmrSystemType=avance
2025-10-27 13:43:40.598   pushParameterThread started
2025-10-27 13:43:40.602   VTC_VT_GAS_SLOPE_LIMIT set to 50.0 lph/s
2025-10-27 13:43:40.842   SOAPProbeServer web service is published at address http://149.236.99.1:10003/services/Bruker.Automation.Services.IBrukProbe/soap
2025-10-27 13:43:40.843   SOAPProbeServer started on port: 10003
2025-10-27 13:43:40.843   SOAPVTUServer web service is published at address http://149.236.99.1:10002/services/Bruker.Automation.Services.IBrukTemperature/soap
2025-10-27 13:43:40.843   SOAPMasSettingsServer web service is published at address http://149.236.99.1:10001/services/Bruker.Automation.Services.IBrukSettings/soap
2025-10-27 13:43:40.843   SOAPVTUServer started on port: 10002
2025-10-27 13:43:40.844   SOAPMasSettingsServer started on port: 10001
2025-10-27 13:43:40.844   Trying to start IBrukNotificationsConsumerSOAPServer
2025-10-27 13:43:40.896   IBrukNotificationsConsumerSOAPServer web service is published at address http://149.236.99.1:10004/services/Bruker.Automation.Services.IBrukNotificationsConsumer/soap
2025-10-27 13:43:40.896   SOAPNotificationServer started on port: 10004
2025-10-27 13:43:40.896   Trying to start SOAPMasSampleTransportServer
2025-10-27 13:43:40.923   Get LIFTMODE
2025-10-27 13:43:40.923   Initial, no CRP probe
2025-10-27 13:43:40.924   BSMS Server started: LIFTMODE: 0
2025-10-27 13:43:40.949   SOAPMasSampleTransportServer web service is published at address http://149.236.99.1:10005/services/Bruker.Automation.Services.IBrukTransfer/soap
2025-10-27 13:43:40.949   SOAPMasSampleTransportServer started on port: 10005
2025-10-27 13:43:40.950   Trying to start SOAPExternalSampleTransportServer
2025-10-27 13:43:40.983   SOAPExternalSampleTransportServer web service is published at address http://149.236.99.1:10006/services/Bruker.Automation.Services.IBrukTransfer/soap
2025-10-27 13:43:40.983   SOAPExternalSampleTransportServer started on port: 10006
2025-10-27 13:43:41.076   Endpoint for BrukerAutomationServicesIBrukSystemEndpoints successfully created for MAS: Server: [http://149.236.99.1:10003/services/Bruker.Automation.Services.IBrukProbe/soap, http://149.236.99.1:10005/services/Bruker.Automation.Services.IBrukTransfer/soap, http://149.236.99.1:10006/services/Bruker.Automation.Services.IBrukTransfer/soap, http://149.236.99.1:10001/services/Bruker.Automation.Services.IBrukSettings/soap, http://149.236.99.1:10004/services/Bruker.Automation.Services.IBrukNotificationsConsumer/soap], Endpoint: 149.236.99.9:20005, ID: [Probe, Flip, SampleDestination, Settings, Notifier]
2025-10-27 13:43:42.081   Trying to start AcqAdapterServer
2025-10-27 13:43:42.086   AcqAdapterServer started successfully, id: {0}:corbaloc:iiop:127.0.0.1:5650/8225277029/CtrlPOA/AcqAdapterServer
2025-10-27 13:43:42.142   GUI Version = TopSpin 4.4.0 / local
2025-10-27 13:43:42.143   cmd=login start
2025-10-27 13:43:42.144   cmd=_p_getprinter
2025-10-27 13:43:42.157   cmd=start_product_update
2025-10-27 13:43:42.158   cmd=start_promotions_refresh
2025-10-27 13:43:42.158   cmd=runonce
2025-10-27 13:43:42.164   cmd=license
2025-10-27 13:43:42.166   License code: CheckExpireDate
2025-10-27 13:43:42.168   to CPR: "checkout_license expire TOPSPIN4" [id 5], COMMAND_WAIT_TERM
2025-10-27 13:43:42.180   Old call: [HPLaserjetP4015x, Cups-PDF]
2025-10-27 13:43:42.217   external cmd from "CPR": "lic_expire_date 2036-10-25T06:47:23+02:00" on "/UndefinedDir/UndefinedName/1/pdata/1", option="-2"
2025-10-27 13:43:42.217   cmd=lic_expire_date 2036-10-25T06:47:23+02:00
2025-10-27 13:43:42.219   CPR task 5 resumed normally, termstat=0
2025-10-27 13:43:42.380   cmd=expinstallcheck
2025-10-27 13:43:42.381   cmd=_db_cleanxml
2025-10-27 13:43:42.381   cmd=startspooler
2025-10-27 13:43:42.382   cmd=mons
2025-10-27 13:43:42.382   cmd=bsmsdisp
2025-10-27 13:43:42.382   cmd=_start_network_interface_silent
2025-10-27 13:43:42.384   cmd=monpdu
2025-10-27 13:43:42.391   cmd=monacb
2025-10-27 13:43:42.392   cmd=monbsmstemp
2025-10-27 13:43:42.393   cmd=montime
2025-10-27 13:43:42.396   cmd=monspooler
2025-10-27 13:43:42.400   cmd=monautodiag
2025-10-27 13:43:42.400   to CPR: "checkout_license expire no_checkout 1011014000:TOPSPIN4" [id 6], COMMAND_WAIT_TERM
2025-10-27 13:43:42.401   cmd=monpowindicator
2025-10-27 13:43:42.402   cmd=montemp
2025-10-27 13:43:42.406   cmd=monmas
2025-10-27 13:43:42.407   cmd=monIndicator
2025-10-27 13:43:42.407   cmd=monadc
2025-10-27 13:43:42.408   cmd=monacq
2025-10-27 13:43:42.426   cmd=monacbrun
2025-10-27 13:43:42.429   cmd=monacqrun
2025-10-27 13:43:42.433   cmd=monIndicatorRun
2025-10-27 13:43:42.450   external cmd from "CPR": "lic_expire_date 2036-10-25T06:47:23+02:00" on "/UndefinedDir/UndefinedName/1/pdata/1", option="-2"
2025-10-27 13:43:42.451   cmd=lic_expire_date 2036-10-25T06:47:23+02:00
2025-10-27 13:43:42.452   CPR task 6 resumed normally, termstat=0
2025-10-27 13:43:42.458   to CPR: "checkout_license expire no_checkout 1021023000:TOPSPIN_GXP_4" [id 7], COMMAND_WAIT_TERM
2025-10-27 13:43:42.465   CPR task 7 resumed normally, termstat=-1
2025-10-27 13:43:42.470   No license available for 1021023000:TOPSPIN_GXP_4
2025-10-27 13:43:42.474   to CPR: "checkout_license expire no_checkout 1011140100:SMP_CMCA" [id 8], COMMAND_WAIT_TERM
2025-10-27 13:43:42.533   external cmd from "CPR": "lic_expire_date 2036-10-25T06:47:23+02:00" on "/UndefinedDir/UndefinedName/1/pdata/1", option="-2"
2025-10-27 13:43:42.533   cmd=lic_expire_date 2036-10-25T06:47:23+02:00
2025-10-27 13:43:42.534   CPR task 8 resumed normally, termstat=0
2025-10-27 13:43:42.536   to CPR: "checkout_license expire no_checkout 1011140200:SMP_CMCA_CLASSROOM" [id 9], COMMAND_WAIT_TERM
2025-10-27 13:43:42.542   CPR task 9 resumed normally, termstat=-1
2025-10-27 13:43:42.542   No license available for 1011140200:SMP_CMCA_CLASSROOM
2025-10-27 13:43:42.542   to CPR: "checkout_license expire no_checkout 1011160100:SMP_CMCQ" [id 10], COMMAND_WAIT_TERM
2025-10-27 13:43:42.548   CPR task 10 resumed normally, termstat=-1
2025-10-27 13:43:42.548   No license available for 1011160100:SMP_CMCQ
2025-10-27 13:43:42.548   to CPR: "checkout_license expire no_checkout 1021290200:FBS_ADVANCED" [id 11], COMMAND_WAIT_TERM
2025-10-27 13:43:42.555   CPR task 11 resumed normally, termstat=-1
2025-10-27 13:43:42.556   No license available for 1021290200:FBS_ADVANCED
2025-10-27 13:43:42.556   to CPR: "checkout_license expire no_checkout 1011330100:SMP_POTENCY_MR" [id 12], COMMAND_WAIT_TERM
2025-10-27 13:43:42.563   CPR task 12 resumed normally, termstat=-1
2025-10-27 13:43:42.563   No license available for 1011330100:SMP_POTENCY_MR
2025-10-27 13:43:42.564   to CPR: "checkout_license expire no_checkout 1011320100:SMP_SMART_DRIVE_NMR" [id 13], COMMAND_WAIT_TERM
2025-10-27 13:43:42.572   CPR task 13 resumed normally, termstat=-1
2025-10-27 13:43:42.573   No license available for 1011320100:SMP_SMART_DRIVE_NMR
2025-10-27 13:43:42.574   to CPR: "checkout_license expire no_checkout 1011150100:SMP_STRUCELU" [id 14], COMMAND_WAIT_TERM
2025-10-27 13:43:42.627   external cmd from "CPR": "lic_expire_date 2022-10-04T06:47:23+02:00" on "/UndefinedDir/UndefinedName/1/pdata/1", option="-2"
2025-10-27 13:43:42.627   cmd=lic_expire_date 2022-10-04T06:47:23+02:00
2025-10-27 13:43:42.630   CPR task 14 resumed normally, termstat=0
2025-10-27 13:43:42.630   to CPR: "checkout_license expire no_checkout 1011150200:SMP_STRUCELU_CLASSROOM" [id 15], COMMAND_WAIT_TERM
2025-10-27 13:43:42.639   CPR task 15 resumed normally, termstat=-1
2025-10-27 13:43:42.639   No license available for 1011150200:SMP_STRUCELU_CLASSROOM
2025-10-27 13:43:42.640   to CPR: "checkout_license expire no_checkout 1021030000:TOPSPIN_NUS" [id 16], COMMAND_WAIT_TERM
2025-10-27 13:43:42.647   CPR task 16 resumed normally, termstat=-1
2025-10-27 13:43:42.648   No license available for 1021030000:TOPSPIN_NUS
2025-10-27 13:43:42.650   to CPR: "checkout_license expire no_checkout 1021230100:ASSURE-SST" [id 17], COMMAND_WAIT_TERM
2025-10-27 13:43:42.662   cmd=_create_drag_tranfer_handler
2025-10-27 13:43:42.693   external cmd from "CPR": "lic_expire_date 2022-10-04T06:47:23+02:00" on "/UndefinedDir/UndefinedName/1/pdata/1", option="-2"
2025-10-27 13:43:42.693   cmd=lic_expire_date 2022-10-04T06:47:23+02:00
2025-10-27 13:43:42.694   CPR task 17 resumed normally, termstat=0
2025-10-27 13:43:42.694   to CPR: "checkout_license expire no_checkout 1021230200:AUTO_CALIBRATE" [id 18], COMMAND_WAIT_TERM
2025-10-27 13:43:42.699   CPR task 18 resumed normally, termstat=-1
2025-10-27 13:43:42.700   No license available for 1021230200:AUTO_CALIBRATE
2025-10-27 13:43:42.847   Error getting HTTP proxy server address for no: restartServer2: restartBase: The IP address no could not be found in /opt/topspin/prog/curdir/root/HttpProxyServer.ref
If the unit with this IP address has been switched on recently
you should run 'cf' now.
2025-10-27 13:43:42.848   Error getting HTTP proxy server address for no: restartServer2: restartBase: The IP address no could not be found in /opt/topspin/prog/curdir/root/HttpProxyServer.ref
If the unit with this IP address has been switched on recently
you should run 'cf' now.
2025-10-27 13:43:43.463   Try to get EPU Ip address : 149.236.99.9
2025-10-27 13:43:43.466   new PDU message: 2=2025-10-27 12:33:34.293: Spectrometer is starting up...
2025-10-27 13:43:43.469   new PDU message: 12=2025-10-27 12:33:34.293: Device Blade: Starting...
2025-10-27 13:43:43.470   new PDU message: 12=2025-10-27 12:33:34.293: Device Blade: is ready for start up...
2025-10-27 13:43:43.470   new PDU message: 12=2025-10-27 12:33:34.293: Device Blade: Starting up takes approximately 3s.
2025-10-27 13:43:43.471   new PDU message: 10=2025-10-27 12:33:34.293: Device Blade: running!
2025-10-27 13:43:43.471   new PDU message: 12=2025-10-27 12:33:34.293: Device PDU Router Outlet: Starting...
2025-10-27 13:43:43.472   new PDU message: 12=2025-10-27 12:33:34.296: Device PDU Router Outlet: is ready for start up...
2025-10-27 13:43:43.472   new PDU message: 12=2025-10-27 12:33:34.296: Switching on power outlet 1 ...
2025-10-27 13:43:43.473   new PDU message: 10=2025-10-27 12:33:34.307: Power outlet 1: Done!
2025-10-27 13:43:43.473   new PDU message: 12=2025-10-27 12:33:34.307: Device PDU Router Outlet: Starting up takes approximately 3s.
2025-10-27 13:43:43.473   new PDU message: 10=2025-10-27 12:33:34.309: Device PDU Router Outlet: running!
2025-10-27 13:43:43.474   new PDU message: 12=2025-10-27 12:33:34.309: Device PDU Blade Outlet: Starting...
2025-10-27 13:43:43.474   new PDU message: 12=2025-10-27 12:33:34.311: Device PDU Blade Outlet: is ready for start up...
2025-10-27 13:43:43.475   new PDU message: 12=2025-10-27 12:33:34.311: Device PDU Blade Outlet: Starting up takes approximately 3s.
2025-10-27 13:43:43.475   new PDU message: 10=2025-10-27 12:33:34.311: Device PDU Blade Outlet: running!
2025-10-27 13:43:43.475   new PDU message: 12=2025-10-27 12:33:34.311: Device PDU1: Starting...
2025-10-27 13:43:43.476   new PDU message: 12=2025-10-27 12:33:34.313: Device PDU1: is ready for start up...
2025-10-27 13:43:43.476   new PDU message: 12=2025-10-27 12:33:34.314: Switching on power outlet 3 ...
2025-10-27 13:43:43.476   PDU address: 149.236.99.9:161
2025-10-27 13:43:43.477   new PDU message: 10=2025-10-27 12:33:34.317: Power outlet 3: Done!
2025-10-27 13:43:43.477   new PDU message: 12=2025-10-27 12:33:37.317: Switching on power outlet 4 ...
2025-10-27 13:43:43.477   new PDU message: 10=2025-10-27 12:33:37.332: Power outlet 4: Done!
2025-10-27 13:43:43.478   new PDU message: 12=2025-10-27 12:33:40.332: Switching on power outlet 5 ...
2025-10-27 13:43:43.478   new PDU message: 10=2025-10-27 12:33:40.360: Power outlet 5: Done!
2025-10-27 13:43:43.479   new PDU message: 12=2025-10-27 12:33:43.360: Switching on power outlet 6 ...
2025-10-27 13:43:43.479   new PDU message: 10=2025-10-27 12:33:43.378: Power outlet 6: Done!
2025-10-27 13:43:43.480   new PDU message: 12=2025-10-27 12:33:46.378: Switching on power outlet 7 ...
2025-10-27 13:43:43.480   new PDU message: 10=2025-10-27 12:33:46.392: Power outlet 7: Done!
2025-10-27 13:43:43.480   new PDU message: 12=2025-10-27 12:33:49.392: Switching on power outlet 8 ...
2025-10-27 13:43:43.481   new PDU message: 10=2025-10-27 12:33:49.406: Power outlet 8: Done!
2025-10-27 13:43:43.481   new PDU message: 12=2025-10-27 12:33:52.407: Device PDU1: Starting up takes approximately 3s.
2025-10-27 13:43:43.482   new PDU message: 10=2025-10-27 12:33:52.422: Device PDU1: running!
2025-10-27 13:43:43.482   new PDU message: 12=2025-10-27 12:33:52.422: Device PDU2: Starting...
2025-10-27 13:43:43.482   new PDU message: 12=2025-10-27 12:33:52.424: Device PDU2: is ready for start up...
2025-10-27 13:43:43.483   new PDU message: 12=2025-10-27 12:33:52.426: Switching on power outlet 2 ...
2025-10-27 13:43:43.483   new PDU message: 10=2025-10-27 12:33:52.440: Power outlet 2: Done!
2025-10-27 13:43:43.483   new PDU message: 12=2025-10-27 12:33:55.440: Switching on power outlet 3 ...
2025-10-27 13:43:43.484   new PDU message: 10=2025-10-27 12:33:55.454: Power outlet 3: Done!
2025-10-27 13:43:43.484   new PDU message: 12=2025-10-27 12:33:58.454: Switching on power outlet 4 ...
2025-10-27 13:43:43.484   new PDU message: 10=2025-10-27 12:33:58.468: Power outlet 4: Done!
2025-10-27 13:43:43.484   new PDU message: 12=2025-10-27 12:34:01.469: Switching on power outlet 5 ...
2025-10-27 13:43:43.485   new PDU message: 10=2025-10-27 12:34:01.483: Power outlet 5: Done!
2025-10-27 13:43:43.485   new PDU message: 12=2025-10-27 12:34:04.483: Switching on power outlet 6 ...
2025-10-27 13:43:43.485   new PDU message: 10=2025-10-27 12:34:04.497: Power outlet 6: Done!
2025-10-27 13:43:43.486   new PDU message: 12=2025-10-27 12:34:07.497: Switching on power outlet 7 ...
2025-10-27 13:43:43.486   new PDU message: 10=2025-10-27 12:34:07.512: Power outlet 7: Done!
2025-10-27 13:43:43.486   new PDU message: 12=2025-10-27 12:34:10.512: Switching on power outlet 8 ...
2025-10-27 13:43:43.486   new PDU message: 10=2025-10-27 12:34:10.526: Power outlet 8: Done!
2025-10-27 13:43:43.487   new PDU message: 12=2025-10-27 12:34:13.526: Device PDU2: Starting up takes approximately 3s.
2025-10-27 13:43:43.487   new PDU message: 10=2025-10-27 12:34:13.543: Device PDU2: running!
2025-10-27 13:43:43.487   new PDU message: 12=2025-10-27 12:34:13.543: Device PDU3: Starting...
2025-10-27 13:43:43.487   new PDU message: 12=2025-10-27 12:34:13.545: Device PDU3: is ready for start up...
2025-10-27 13:43:43.488   new PDU message: 12=2025-10-27 12:34:13.547: Switching on power outlet 2 ...
2025-10-27 13:43:43.488   new PDU message: 10=2025-10-27 12:34:13.561: Power outlet 2: Done!
2025-10-27 13:43:43.488   new PDU message: 12=2025-10-27 12:34:16.561: Switching on power outlet 3 ...
2025-10-27 13:43:43.489   new PDU message: 10=2025-10-27 12:34:16.576: Power outlet 3: Done!
2025-10-27 13:43:43.489   new PDU message: 12=2025-10-27 12:34:19.576: Switching on power outlet 4 ...
2025-10-27 13:43:43.489   new PDU message: 10=2025-10-27 12:34:19.590: Power outlet 4: Done!
2025-10-27 13:43:43.489   new PDU message: 12=2025-10-27 12:34:22.590: Switching on power outlet 5 ...
2025-10-27 13:43:43.490   new PDU message: 10=2025-10-27 12:34:22.605: Power outlet 5: Done!
2025-10-27 13:43:43.490   new PDU message: 12=2025-10-27 12:34:25.605: Switching on power outlet 6 ...
2025-10-27 13:43:43.490   new PDU message: 10=2025-10-27 12:34:25.619: Power outlet 6: Done!
2025-10-27 13:43:43.490   new PDU message: 12=2025-10-27 12:34:28.620: Switching on power outlet 7 ...
2025-10-27 13:43:43.491   new PDU message: 10=2025-10-27 12:34:28.634: Power outlet 7: Done!
2025-10-27 13:43:43.491   new PDU message: 12=2025-10-27 12:34:31.635: Switching on power outlet 8 ...
2025-10-27 13:43:43.491   new PDU message: 10=2025-10-27 12:34:31.663: Power outlet 8: Done!
2025-10-27 13:43:43.491   new PDU message: 12=2025-10-27 12:34:34.663: Device PDU3: Starting up takes approximately 3s.
2025-10-27 13:43:43.492   new PDU message: 10=2025-10-27 12:34:34.683: Device PDU3: running!
2025-10-27 13:43:43.492   new PDU message: 12=2025-10-27 12:34:34.683: Device BSMS 1: Starting...
2025-10-27 13:43:43.492   new PDU message: 12=2025-10-27 12:34:34.769: Device BSMS 1: is ready for start up...
2025-10-27 13:43:43.492   new PDU message: 12=2025-10-27 12:34:34.769: Device BSMS 1: getting shim start up duration, which may take up to 45 seconds ...
2025-10-27 13:43:43.493   new PDU message: 12=2025-10-27 12:36:46.487: Device BSMS 1: Starting up takes approximately 90s.
2025-10-27 13:43:43.493   new PDU message: 12=2025-10-27 12:36:46.953: Device BSMS 1: Ramp up duration for shims is 20 seconds.
2025-10-27 13:43:43.493   new PDU message: 12=2025-10-27 12:36:46.953: Device BSMS 1: getting shim start up duration, which may take up to 45 seconds ...
2025-10-27 13:43:43.493   new PDU message: 10=2025-10-27 12:36:47.777: Device BSMS 1: Status: running!
2025-10-27 13:43:43.493   new PDU message: 10=2025-10-27 12:36:47.777: Device BSMS 1: running!
2025-10-27 13:43:43.494   new PDU message: 12=2025-10-27 12:36:47.777: Device BSMS 2: Starting...
2025-10-27 13:43:43.494   new PDU message: 12=2025-10-27 12:36:47.777: Device BSMS 2: does not exist, ignoring BSMS 2!
2025-10-27 13:43:43.494   new PDU message: 12=2025-10-27 12:36:47.777: Device Acquisition Server 1: Starting...
2025-10-27 13:43:43.494   new PDU message: 12=2025-10-27 12:36:47.777: Device Acquisition Server 1: is ready for start up...
2025-10-27 13:43:43.494   new PDU message: 12=2025-10-27 12:36:47.777: Device Acquisition Server 1: Starting up takes approximately 3s.
2025-10-27 13:43:43.494   new PDU message: 10=2025-10-27 12:36:47.777: Device Acquisition Server 1: running!
2025-10-27 13:43:43.495   new PDU message: 0=2025-10-27 12:36:47.777: Spectrometer is running!
2025-10-27 13:43:44.277   Server error in writeRemoteFileToLocalDisk:
Cannot set file permissions:
IDL:bruker.de/common/NotAvailable:1.0
getChunkFromBinaryFile: remote file '/opt/topspin/prog/curdir/root/bsmserrormsg1.log' not available

2025-10-27 13:43:44.566   flip with ATMA, isIProbe: false, isMasProbe: true, flipWithATMA: false, result: false
2025-10-27 13:43:44.794   Error configuring BasicSampleChanger for MAS: Initializing ATMA failed:  ATMA2 MAS Server initialize failed: Error in getParameters reported by ProbeServer: hasI2cAccessError while trying to read PICS: AqRackClient: Cannot ensure that the server is in a valid state: Error in "ensureValidServer":    Error Event:      EMERGENCY-STOP activated:   HighVoltage dropped below lower limit, EmStop activated   Last Occurrence: 240 sec since startup Code: -596 ID: 51 State: pending Device Path: /PSM-A.1/HPPR/2 COVER2.1/HPLNA BB31P.3 Error Event:      EMERGENCY-STOP activated:   Module internal/external power supply under voltage detected, EmStop activated   Last Occurrence: 240 sec since startup Code: -590 ID: 54 State: pending Device Path: /PSM-A.1/HPPR/2 COVER2.1/HPLNA 1H19F.1 Error Event:      EMERGENCY-STOP activated:   Module internal/external power supply under voltage detected, EmStop activated   Last Occurrence: 240 sec since startup Code: -590 ID: 55 State: new Device Path: /PSM-A.1/HPPR/2 COVER2.1/HPLNA BB31P.3 Error Event:      EMERGENCY-STOP activated:   HighVoltage dropped below lower limit, EmStop activated   Last Occurrence: 240 sec since startup Code: -596 ID: 56 State: new Device Path: /PSM-A.1/HPPR/2 COVER2.1/HPLNA 1H19F.1 Error Event:      EMERGENCY-STOP activated:   Transmit <-> Receive switching rate was too high, EmStop activated   Last Occurrence: 240 sec since startup Code: -597 ID: 57 State: new Device Path: /PSM-A.1/HPPR/2 COVER2.1/HPLNA 1H19F.1 Error Event:      EMERGENCY-STOP activated:   External power supply under voltage detected, EmStop activated   Last Occurrence: 240 sec since startup Code: -589 ID: 58 State: new Device Path: /PSM-A.1/HPPR/2 COVER2.1/HPLNA 1H19F.1 
2025-10-27 13:43:45.913   Error getting optical rotor detection: Error in getParameters reported by ProbeServer:
Installed probe is not an ATMA probe!
2025-10-27 13:43:45.961   BasicSampleChanger MAS configuration: false, false
2025-10-27 13:44:19.929   cmd=_create_drag_tranfer_handler
2025-10-27 13:44:19.943   cmd[1]=re /opt/nmrdata/data/zuser/nmr/f-MLF_3p2_250402/1/pdata/1
2025-10-27 13:44:19.987   cmd[1]=browse_update_last50
2025-10-27 13:44:19.988   cmd[1]=adddatadirautomaticwithcheck /opt/nmrdata/data/zuser/nmr
2025-10-27 13:44:20.012   cmd[1]=_create_drag_tranfer_handler
2025-10-27 13:44:20.014   Entered MODULE de.bruker.nmr.pr.disp.BasicNMRModule
2025-10-27 13:44:20.015   adddataset corbaloc:iiop:127.0.0.1:5505/NMRDataServer##%/opt/nmrdata/data/zuser/nmr/f-MLF_3p2_250402/1/pdata/1
2025-10-27 13:44:31.172   cmd[1]=ii restart
2025-10-27 13:44:31.177   sendAllCmds: sendCommand ii restart on: /opt/nmrdata/data/zuser/nmr/f-MLF_3p2_250402/1/pdata/1
2025-10-27 13:44:32.092   keep alive thread started
2025-10-27 13:44:32.691   ii : <html><br>In experiment: f-MLF_3p2_250402 1 1 /opt/nmrdata/data/zuser/nmr <br>(Parameter Set = 'unknown') <br> <br>Cannot run single acquisition: <br>Cannot connect to aqrackserver: AqRackClient: Cannot ensure that the server is in a valid state: <br>Error in &quot;ensureValidServer&quot;:  <br> <br> <br>Error Event: <br> &nbsp; &nbsp; <br>EMERGENCY-STOP activated: <br> &nbsp;External power supply under voltage detected, EmStop activated <br> &nbsp;Last Occurrence: 240 sec since startup <br>Code: -589 ID: 58 State: pending Device Path: /PSM-A.1/HPPR/2 COVER2.1/HPLNA 1H19F.1 <br>Error Event: <br> &nbsp; &nbsp; <br>EMERGENCY-STOP activated: <br> &nbsp;HighVoltage dropped below lower limit, EmStop activated <br> &nbsp;Last Occurrence: 654 sec since startup <br>Code: -596 ID: 59 State: new Device Path: /PSM-A.1/HPPR/2 COVER2.1/HPLNA BB31P.3 <br>Error Event: <br> &nbsp; &nbsp; <br>EMERGENCY-STOP activated: <br> &nbsp;HighVoltage dropped below lower limit, EmStop activated <br> &nbsp;Last Occurrence: 654 sec since startup <br>Code: -596 ID: 60 State: new Device Path: /PSM-A.1/HPPR/2 COVER2.1/HPLNA 1H19F.1 <br>Error Event: <br> &nbsp; &nbsp; <br>EMERGENCY-STOP activated: <br> &nbsp;Transmit &lt;-&gt; Receive switching rate was too high, EmStop activated <br> &nbsp;Last Occurrence: 654 sec since startup <br>Code: -597 ID: 61 State: new Device Path: /PSM-A.1/HPPR/2 COVER2.1/HPLNA 1H19F.1 <br>Error Event: <br> &nbsp; &nbsp; <br>EMERGENCY-STOP activated: <br> &nbsp;Module internal/external power supply under voltage detected, EmStop activated <br> &nbsp;Last Occurrence: 654 sec since startup <br>Code: -590 ID: 62 State: new Device Path: /PSM-A.1/HPPR/2 COVER2.1/HPLNA 1H19F.1 <br></html>
2025-10-27 13:45:13.065   cmd[1]=acqustop end POWCHK_ON ACQU
2025-10-27 13:45:13.066   processStop called: dataset from ct: /opt/nmrdata/data/zuser/nmr/f-MLF_3p2_250402/1/pdata/1, dataset from GO: /opt/nmrdata/data/zuser/nmr/f-MLF_3p2_250402/1/pdata/1
2025-10-27 13:45:13.514   ii : <html><br>In experiment: f-MLF_3p2_250402 1 1 /opt/nmrdata/data/zuser/nmr <br>(Parameter Set = 'unknown') <br> <br>HardwareErrorCheck: Cannot fetch and clear AQS rack errors: <br>client: AqRackClient: Cannot reset AQ rack server: <br>Error in &quot;reset&quot;: EXCEPTION in reset: <br>Cannot reset TRX1: <br>Error Event: <br> &nbsp; &nbsp; <br>EMERGENCY-STOP activated: <br> &nbsp;Module internal/external power supply under voltage detected, EmStop activated <br> &nbsp;Last Occurrence: 702 sec since startup <br>Code: -590 ID: 63 State: pending Device Path: /PSM-A.1/HPPR/2 COVER2.1/HPLNA BB31P.3 <br>Error Event: <br> &nbsp; &nbsp; <br>EMERGENCY-STOP activated: <br> &nbsp;External power supply under voltage detected, EmStop activated <br> &nbsp;Last Occurrence: 702 sec since startup <br>Code: -589 ID: 64 State: pending Device Path: /PSM-A.1/HPPR/2 COVER2.1/HPLNA 1H19F.1 <br>Error Event: <br> &nbsp; &nbsp; <br>EMERGENCY-STOP activated: <br> &nbsp;HighVoltage dropped below lower limit, EmStop activated <br> &nbsp;Last Occurrence: 743 sec since startup <br>Code: -596 ID: 65 State: new Device Path: /PSM-A.1/HPPR/2 COVER2.1/HPLNA BB31P.3 <br>Error Event: <br> &nbsp; &nbsp; <br>EMERGENCY-STOP activated: <br> &nbsp;HighVoltage dropped below lower limit, EmStop activated <br> &nbsp;Last Occurrence: 743 sec since startup <br>Code: -596 ID: 66 State: new Device Path: /PSM-A.1/HPPR/2 COVER2.1/HPLNA 1H19F.1 <br>Error Event: <br> &nbsp; &nbsp; <br>EMERGENCY-STOP activated: <br> &nbsp;Transmit &lt;-&gt; Receive switching rate was too high, EmStop activated <br> &nbsp;Last Occurrence: 743 sec since startup <br>Code: -597 ID: 67 State: new Device Path: /PSM-A.1/HPPR/2 COVER2.1/HPLNA 1H19F.1 <br>Error Event: <br> &nbsp; &nbsp; <br>EMERGENCY-STOP activated: <br> &nbsp;Module internal/external power supply under voltage detected, EmStop activated <br> &nbsp;Last Occurrence: 743 sec since startup <br>Code: -590 ID: 68 State: new Device Path: /PSM-A.1/HPPR/2 COVER2.1/HPLNA 1H19F.1 <br></html>
2025-10-27 13:45:15.212   waitForEndOfCmd: command not running anymore
2025-10-27 13:45:15.212   command ii terminated
2025-10-27 13:45:15.213   sendCommand: exitStatus for command ii:goError
2025-10-27 13:45:15.214   sendAllCmds: command finished: -1
2025-10-27 13:45:25.691   ExitHandler: irregular shutdown detected.
2025-10-27 13:45:25.694   Disconnect: logoff from current CPR session 'corbaloc:iiop:132.229.121.105:5500/CPRMsg'

  2025-10-27
---------------
2025-10-27 13:47:37.704   java.io.FileNotFoundException : Can't read sample list cache from /srv/Bruker/TopSpin/sampleList.json
2025-10-27 13:47:38.857   Graphical User Interface started.
2025-10-27 13:47:38.858   Operating system = LINUX, JVM type (bit) = 64

2025-10-27 13:47:38.859   User properties directory=/home/nmrafd/.topspin1/prop
2025-10-27 13:47:39.483   cmd=_create_drag_tranfer_handler
2025-10-27 13:47:39.688   initCprCom: opening file for local session key at '/opt/topspin4.4.0/prog/curdir/nmrafd/keystore/localSession.key'
2025-10-27 13:47:39.689   initCprCom: local session key imported successfully.
2025-10-27 13:47:39.690   initCprCom: GUI session key created
2025-10-27 13:47:39.691   cmd=init_cpr
2025-10-27 13:47:39.694   Start ORB: recommended port=5650.
2025-10-27 13:47:39.756   Start ORB: successful on port 5650
2025-10-27 13:47:39.757   cmd=cprlistener
2025-10-27 13:47:39.761   Start CprListenerServer: activate.
2025-10-27 13:47:39.797   Start CprListenerServer: activation successful, id = corbaloc:iiop:127.0.0.1:5650/6826416725/CtrlPOA/CPRClient, localized id = corbaloc:iiop:127.0.0.1:5650/6826416725/CtrlPOA/CPRClient
2025-10-27 13:47:39.958   Contact configuration service: URL=corbaloc:iiop:132.229.121.105:5500/ConfigurationServer, IOR=IOR:010000002400000049444c3a6272756b65722e64652f6370722f436f6e66696775726174696f6e3a312e3000010000000000000084000000010102000a0000003132372e302e302e31007c1513000000436f6e66696775726174696f6e536572766572000300000000000000080000000100000000545441010000001c000000010000000100010001000000010001050901010001000000090101000300000018000000010000000d0000003134392e3233362e39392e3100007c15
2025-10-27 13:47:39.959   Contact configuration service: local contact, using URL: corbaloc:iiop:127.0.0.1:5500/ConfigurationServer
2025-10-27 13:47:39.989   Contact configuration service: successful.
2025-10-27 13:47:39.990   Contact configuration service: local session, authentication done.
2025-10-27 13:47:39.996   Contact CPR: local contact, narrowing object for: corbaloc:iiop:127.0.0.1:5500/CPRMsg, IOR=IOR:010000001d00000049444c3a6272756b65722e64652f6370722f4350524d73673a312e3000000000010000000000000078000000010102000a0000003132372e302e302e31007c15060000004350524d736700000300000000000000080000000100000000545441010000001c000000010000000100010001000000010001050901010001000000090101000300000018000000010000000d0000003134392e3233362e39392e3100007c15
2025-10-27 13:47:39.998   Contact CPR: object is valid.
2025-10-27 13:47:39.999   Contact CPR: address of CprListener is corbaloc:iiop:127.0.0.1:5650/6826416725/CtrlPOA/CPRClient
2025-10-27 13:47:39.999   Contact CPR: login at CPR with "corbaloc:iiop:127.0.0.1:5650/6826416725/CtrlPOA/CPRClient"
2025-10-27 13:47:40.251   Contact CPR: attempt #0 to get assigned client id...
2025-10-27 13:47:40.252   Contact CPR: successful, got id '1'.
2025-10-27 13:47:40.252   CPR connection successful, client id = 1
2025-10-27 13:47:40.286   Start dataserver: launching command, waiting on result
2025-10-27 13:47:40.287   Start dataserver: getting current address
2025-10-27 13:47:40.419   Start dataserver: URL=corbaloc:iiop:132.229.121.105:5505/NMRDataServer, IOR=IOR:010000002800000049444c3a6272756b65722e64652f646174612f4469736346756e6350726f76696465723a312e300001000000000000009800000001010200100000003133322e3232392e3132312e3130350081150000110000004e4d5244617461536572766572312e31300000000400000000000000080000000100000000545441010000001c000000010000000100010001000000010001050901010001000000090101000300000014000000010000000a0000003132372e302e302e310081151400000008000000010066006600b315
2025-10-27 13:47:40.419   Start dataserver: local contact, using URL: corbaloc:iiop:127.0.0.1:5505/NMRDataServer
2025-10-27 13:47:40.429   Start dataserver: path to logfile is "/opt/topspin4.4.0/prog/curdir/nmrafd/stdout.NMRDataServer1.log"
2025-10-27 13:47:40.429   Start dataserver: successful.
2025-10-27 13:47:40.432   cmd=_show_lic
2025-10-27 13:47:40.436   getLicense called: attribute
2025-10-27 13:47:40.445   to CPR: "checkout_license verbose attribute" [id 1], COMMAND_WAIT_TERM
2025-10-27 13:47:40.448   external cmd from "CPR": "lic_attribute" on "", option="-2"
2025-10-27 13:47:40.449   cmd=lic_attribute
2025-10-27 13:47:40.451   License type: 
2025-10-27 13:47:40.452   getAttribute called: 0
2025-10-27 13:47:40.452   wait for license attribute
2025-10-27 13:47:40.452   get license attribute finished
2025-10-27 13:47:40.455   CPR task 1 resumed normally, termstat=0
2025-10-27 13:47:40.669   try RestartClient: serverAddress: corbaloc:iiop:127.0.0.1:5520/restartserver2
2025-10-27 13:47:40.677   RestartClient: serverAddress is valid!
2025-10-27 13:47:40.798   cmd=_set_cprhist
2025-10-27 13:47:40.875   to CPR: "get_version_info -info 1761569260875" [id 2], COMMAND_WAIT_START
2025-10-27 13:47:40.882   fromCPR loadAlert id = 0 message = ~~~~~1761569260875 TopSpin 4.4.0
2025-10-27 13:47:40.883   CPR task 2 resumed normally, termstat=0
2025-10-27 13:47:40.884   GUI Version = TopSpin 4.4.0 / local
2025-10-27 13:47:41.074   com.bruker.bio.nmrdatasearch.api.invoker.ApiException : Communication with NMR Search Backend failed. Trying again. Cause:
java.net.ConnectException: Failed to connect to localhost/0:0:0:0:0:0:0:1:8080
2025-10-27 13:47:48.517   cmd=configuretopspin
2025-10-27 13:47:48.520   configureTopSpin: entered
2025-10-27 13:47:48.521   configureTopSpin: try to set permanent lock
2025-10-27 13:47:48.530   configureTopSpin: successfully set permanent lock
2025-10-27 13:47:48.533   Installation configured with curinst: Avance NEO at IP 149.236.99.9
2025-10-27 13:47:48.546   try RestartClient: serverAddress: corbaloc:iiop:149.236.99.9:5520/restartserver2
2025-10-27 13:47:48.550   RestartClient: serverAddress is valid!
2025-10-27 13:47:48.595   LOCKCONF, SamChgEth[0-3], PduEth, LDUETH [DLM, no, no, no, no, 192.168.99.99, no]
2025-10-27 13:47:48.611   ValueLine config FALSE
2025-10-27 13:47:48.616   getLicense called: 1021040000:TOPSPIN_NMRPT
2025-10-27 13:47:48.617   to CPR: "checkout_license verbose 1021040000:TOPSPIN_NMRPT" [id 3], COMMAND_WAIT_TERM
2025-10-27 13:47:48.623   external cmd from "CPR": "lic_error CodeMeter checkout(1021040000:TOPSPIN_NMRPT) at 13:47:48.618 failed
No matching license entry found for feature "1021040000:TOPSPIN_NMRPT" .
CmContainer Entry not found, Error 200.This information is now cached until TopSpin restart.
" on "/UndefinedDir/UndefinedName/1/pdata/1", option="-2"
2025-10-27 13:47:48.624   cmd=lic_error CodeMeter checkout(1021040000:TOPSPIN_NMRPT) at 13:47:48.618 failed
No matching license entry found for feature "1021040000:TOPSPIN_NMRPT" .
CmContainer Entry not found, Error 200.This information is now cached until TopSpin restart.
2025-10-27 13:47:48.624   receiveLicenseErrorFromCpr called
2025-10-27 13:47:48.625   CPR task 3 resumed normally, termstat=-1
2025-10-27 13:47:48.625   receiveLicenseErrorFromCpr called: CodeMeter checkout(1021040000:TOPSPIN_NMRPT) at 13:47:48.618 failed
No matching license entry found for feature "1021040000:TOPSPIN_NMRPT" .
CmContainer Entry not found, Error 200.This information is now cached until TopSpin restart.
2025-10-27 13:47:48.625   getLicense called: -1
2025-10-27 13:47:48.626   getLastError called: CodeMeter checkout(1021040000:TOPSPIN_NMRPT) at 13:47:48.618 failed
No matching license entry found for feature "1021040000:TOPSPIN_NMRPT" .
CmContainer Entry not found, Error 200.This information is now cached until TopSpin restart.
2025-10-27 13:47:48.626   getLicense called, error: CodeMeter checkout(1021040000:TOPSPIN_NMRPT) at 13:47:48.618 failed
No matching license entry found for feature "1021040000:TOPSPIN_NMRPT" .
CmContainer Entry not found, Error 200.This information is now cached until TopSpin restart.
2025-10-27 13:47:48.627   License for product code 1021040000:TOPSPIN_NMRPT valid: [false]
2025-10-27 13:47:48.628   getLicense called: 1021091000:TOPSPIN_DEVCLASS_NEO
2025-10-27 13:47:48.628   to CPR: "checkout_license verbose 1021091000:TOPSPIN_DEVCLASS_NEO" [id 4], COMMAND_WAIT_TERM
2025-10-27 13:47:48.643   CPR task 4 resumed normally, termstat=0
2025-10-27 13:47:48.643   getLicense called: 0
2025-10-27 13:47:48.643   License for product code 1021091000:TOPSPIN_DEVCLASS_NEO valid: [true]
2025-10-27 13:47:48.659   Datastation: false, ELCB: true, EVTU: true, BACSAIR: true, MAS Unit: true, VTU: false,
                      Prodigy: false, AVNeo: true, MiniSpec: false, Fourier: false, Multi-receiver: true, number of receivers: 3,
                      Multipeak lock: true, NMR thermometer: false, 19F lock: false, Sample changer: false,
                      Lock: true, SoftLock: false, GradientAmplifiers: true,
                      isCoreLine: false, hasSCU: true, spectrometerLicense: TOPSPIN_DEVCLASS_NEO , LT-MAS type: 0
2025-10-27 13:47:48.778   FidDataServer0 successfully started
2025-10-27 13:47:48.894   FidDataServer1 successfully started
2025-10-27 13:47:48.983   FidDataServer2 successfully started
2025-10-27 13:47:48.985   cmd=startwatcher
2025-10-27 13:47:48.986   cmd=startsoapmassettingsserver
2025-10-27 13:47:48.986   cmd=setendpointsformas
2025-10-27 13:47:48.986   cmd=setendpointsforltmas
2025-10-27 13:47:48.988   Trying to start SOAPMasSettingsServer
2025-10-27 13:47:48.988   Do not publish
2025-10-27 13:47:48.989   cmd=configurebasicsamplechangerformas
2025-10-27 13:47:48.989   cmd=startsoapvtuserver
2025-10-27 13:47:48.990   cmd=startmassercuritysupervisor
2025-10-27 13:47:48.990   cmd=startbsmsserver
2025-10-27 13:47:48.991   Trying to start SOAPVTUServer
2025-10-27 13:47:48.994   Start BsmsServer
2025-10-27 13:47:48.999   Try to get EPU Ip address : 149.236.99.9
2025-10-27 13:47:48.999   sendGUIrestarted 
2025-10-27 13:47:49.000   entering sendGUIrestarted 
2025-10-27 13:47:49.003   found  go4 1
2025-10-27 13:47:49.012   getHconfServer started remote.
2025-10-27 13:47:49.016   getHconfServer started remote.
2025-10-27 13:47:49.022   now send gui_restarted to go... 
2025-10-27 13:47:49.023   gui_restarted done 
2025-10-27 13:47:49.025   sendGUIrestarted 
2025-10-27 13:47:49.025   entering sendGUIrestarted 
2025-10-27 13:47:49.027   BasicSampleChanger start arguments: ipAddress=192.168.99.100 identPort=80,10000 logFileName=stdout.BasicSampleChangerServer.log logFileSize=104857600 restartServerIpAddress=192.168.99.100 restartServerPort=5520 nmrSystemType=avance
2025-10-27 13:47:49.033   sendGUIrestarted 
2025-10-27 13:47:49.034   entering sendGUIrestarted 
2025-10-27 13:47:49.039   Trying to start SOAPProbeServer
2025-10-27 13:47:49.051   switched to real spectrometer and no shutdown in progress, start SuperVision StatusMessageFetcher thread 
2025-10-27 13:47:49.053   Initializing coil temperature values
2025-10-27 13:47:49.056   Error getting HTTP proxy server address for no: restartServer2: restartBase: The IP address no could not be found in /opt/topspin/prog/curdir/root/HttpProxyServer.ref
If the unit with this IP address has been switched on recently
you should run 'cf' now.
2025-10-27 13:47:49.060   configureTopSpin: finished successfully...
2025-10-27 13:47:49.072   Cannot get maintenance status of instrument: com.bruker.pmw.client.invoker.ApiException: java.net.ConnectException: Failed to connect to localhost/0:0:0:0:0:0:0:1:8080
2025-10-27 13:47:49.074   Start BsmsServer: activation successful, id: corbaloc:iiop:149.236.99.1:5650/6826416725/CtrlPOA/BsmsServer
2025-10-27 13:47:49.074   Trying to start AcqAdapterServer
2025-10-27 13:47:49.083   AcqAdapterServer started successfully, id: {0}:corbaloc:iiop:127.0.0.1:5650/6826416725/CtrlPOA/AcqAdapterServer
2025-10-27 13:47:49.118   pushParameterThread started
2025-10-27 13:47:49.120   VTC_VT_GAS_SLOPE_LIMIT set to 50.0 lph/s
2025-10-27 13:47:49.126   BasicSampleChanger start arguments: ipAddress=192.168.99.100 identPort=80,10000 logFileName=stdout.BasicSampleChangerServer.log logFileSize=104857600 restartServerIpAddress=192.168.99.100 restartServerPort=5520 nmrSystemType=avance
2025-10-27 13:47:49.165   Get LIFTMODE
2025-10-27 13:47:49.165   Initial, no CRP probe
2025-10-27 13:47:49.165   BSMS Server started: LIFTMODE: 0
2025-10-27 13:47:49.221   GUI Version = TopSpin 4.4.0 / local
2025-10-27 13:47:49.221   cmd=login start
2025-10-27 13:47:49.223   cmd=_p_getprinter
2025-10-27 13:47:49.233   cmd=start_product_update
2025-10-27 13:47:49.234   cmd=start_promotions_refresh
2025-10-27 13:47:49.234   cmd=runonce
2025-10-27 13:47:49.267   cmd=license
2025-10-27 13:47:49.271   License code: CheckExpireDate
2025-10-27 13:47:49.280   to CPR: "checkout_license expire TOPSPIN4" [id 5], COMMAND_WAIT_TERM
2025-10-27 13:47:49.333   Old call: [HPLaserjetP4015x, Cups-PDF]
2025-10-27 13:47:49.347   external cmd from "CPR": "lic_expire_date 2036-10-25T06:47:23+02:00" on "/UndefinedDir/UndefinedName/1/pdata/1", option="-2"
2025-10-27 13:47:49.347   cmd=lic_expire_date 2036-10-25T06:47:23+02:00
2025-10-27 13:47:49.350   CPR task 5 resumed normally, termstat=0
2025-10-27 13:47:49.603   cmd=expinstallcheck
2025-10-27 13:47:49.603   cmd=_db_cleanxml
2025-10-27 13:47:49.603   cmd=startspooler
2025-10-27 13:47:49.604   cmd=mons
2025-10-27 13:47:49.604   cmd=bsmsdisp
2025-10-27 13:47:49.605   cmd=_start_network_interface_silent
2025-10-27 13:47:49.607   cmd=monpdu
2025-10-27 13:47:49.613   cmd=monadc
2025-10-27 13:47:49.614   cmd=monacq
2025-10-27 13:47:49.619   cmd=monacb
2025-10-27 13:47:49.621   cmd=monIndicator
2025-10-27 13:47:49.630   cmd=montime
2025-10-27 13:47:49.630   cmd=monspooler
2025-10-27 13:47:49.631   cmd=monautodiag
2025-10-27 13:47:49.639   cmd=montemp
2025-10-27 13:47:49.644   cmd=monpowindicator
2025-10-27 13:47:49.654   cmd=monmas
2025-10-27 13:47:49.655   cmd=monbsmstemp
2025-10-27 13:47:49.656   cmd=monacbrun
2025-10-27 13:47:49.659   cmd=monacqrun
2025-10-27 13:47:49.660   cmd=monIndicatorRun
2025-10-27 13:47:49.801   Error getting HTTP proxy server address for no: restartServer2: restartBase: The IP address no could not be found in /opt/topspin/prog/curdir/root/HttpProxyServer.ref
If the unit with this IP address has been switched on recently
you should run 'cf' now.
2025-10-27 13:47:49.874   to CPR: "checkout_license expire no_checkout 1011014000:TOPSPIN4" [id 6], COMMAND_WAIT_TERM
2025-10-27 13:47:49.939   external cmd from "CPR": "lic_expire_date 2036-10-25T06:47:23+02:00" on "/UndefinedDir/UndefinedName/1/pdata/1", option="-2"
2025-10-27 13:47:49.939   cmd=lic_expire_date 2036-10-25T06:47:23+02:00
2025-10-27 13:47:49.941   CPR task 6 resumed normally, termstat=0
2025-10-27 13:47:49.942   to CPR: "checkout_license expire no_checkout 1021023000:TOPSPIN_GXP_4" [id 7], COMMAND_WAIT_TERM
2025-10-27 13:47:49.947   CPR task 7 resumed normally, termstat=-1
2025-10-27 13:47:49.948   No license available for 1021023000:TOPSPIN_GXP_4
2025-10-27 13:47:49.949   to CPR: "checkout_license expire no_checkout 1011140100:SMP_CMCA" [id 8], COMMAND_WAIT_TERM
2025-10-27 13:47:50.007   external cmd from "CPR": "lic_expire_date 2036-10-25T06:47:23+02:00" on "/UndefinedDir/UndefinedName/1/pdata/1", option="-2"
2025-10-27 13:47:50.007   cmd=lic_expire_date 2036-10-25T06:47:23+02:00
2025-10-27 13:47:50.011   to CPR: "checkout_license expire no_checkout 1011140200:SMP_CMCA_CLASSROOM" [id 9], COMMAND_WAIT_TERM
2025-10-27 13:47:50.012   CPR task 8 resumed normally, termstat=0
2025-10-27 13:47:50.019   CPR task 9 resumed normally, termstat=-1
2025-10-27 13:47:50.019   No license available for 1011140200:SMP_CMCA_CLASSROOM
2025-10-27 13:47:50.021   to CPR: "checkout_license expire no_checkout 1011160100:SMP_CMCQ" [id 10], COMMAND_WAIT_TERM
2025-10-27 13:47:50.027   cmd=_create_drag_tranfer_handler
2025-10-27 13:47:50.027   CPR task 10 resumed normally, termstat=-1
2025-10-27 13:47:50.037   No license available for 1011160100:SMP_CMCQ
2025-10-27 13:47:50.041   SOAPMasSettingsServer web service is published at address http://149.236.99.1:10001/services/Bruker.Automation.Services.IBrukSettings/soap
2025-10-27 13:47:50.041   SOAPVTUServer web service is published at address http://149.236.99.1:10002/services/Bruker.Automation.Services.IBrukTemperature/soap
2025-10-27 13:47:50.041   SOAPProbeServer web service is published at address http://149.236.99.1:10003/services/Bruker.Automation.Services.IBrukProbe/soap
2025-10-27 13:47:50.041   SOAPVTUServer started on port: 10002
2025-10-27 13:47:50.041   SOAPProbeServer started on port: 10003
2025-10-27 13:47:50.041   SOAPMasSettingsServer started on port: 10001
2025-10-27 13:47:50.042   to CPR: "checkout_license expire no_checkout 1021290200:FBS_ADVANCED" [id 11], COMMAND_WAIT_TERM
2025-10-27 13:47:50.043   Trying to start IBrukNotificationsConsumerSOAPServer
2025-10-27 13:47:50.049   CPR task 11 resumed normally, termstat=-1
2025-10-27 13:47:50.049   No license available for 1021290200:FBS_ADVANCED
2025-10-27 13:47:50.050   to CPR: "checkout_license expire no_checkout 1011330100:SMP_POTENCY_MR" [id 12], COMMAND_WAIT_TERM
2025-10-27 13:47:50.055   CPR task 12 resumed normally, termstat=-1
2025-10-27 13:47:50.056   No license available for 1011330100:SMP_POTENCY_MR
2025-10-27 13:47:50.057   to CPR: "checkout_license expire no_checkout 1011320100:SMP_SMART_DRIVE_NMR" [id 13], COMMAND_WAIT_TERM
2025-10-27 13:47:50.063   CPR task 13 resumed normally, termstat=-1
2025-10-27 13:47:50.064   No license available for 1011320100:SMP_SMART_DRIVE_NMR
2025-10-27 13:47:50.065   to CPR: "checkout_license expire no_checkout 1011150100:SMP_STRUCELU" [id 14], COMMAND_WAIT_TERM
2025-10-27 13:47:50.121   external cmd from "CPR": "lic_expire_date 2022-10-04T06:47:23+02:00" on "/UndefinedDir/UndefinedName/1/pdata/1", option="-2"
2025-10-27 13:47:50.121   cmd=lic_expire_date 2022-10-04T06:47:23+02:00
2025-10-27 13:47:50.122   CPR task 14 resumed normally, termstat=0
2025-10-27 13:47:50.123   to CPR: "checkout_license expire no_checkout 1011150200:SMP_STRUCELU_CLASSROOM" [id 15], COMMAND_WAIT_TERM
2025-10-27 13:47:50.129   CPR task 15 resumed normally, termstat=-1
2025-10-27 13:47:50.129   No license available for 1011150200:SMP_STRUCELU_CLASSROOM
2025-10-27 13:47:50.130   to CPR: "checkout_license expire no_checkout 1021030000:TOPSPIN_NUS" [id 16], COMMAND_WAIT_TERM
2025-10-27 13:47:50.135   IBrukNotificationsConsumerSOAPServer web service is published at address http://149.236.99.1:10004/services/Bruker.Automation.Services.IBrukNotificationsConsumer/soap
2025-10-27 13:47:50.135   CPR task 16 resumed normally, termstat=-1
2025-10-27 13:47:50.135   No license available for 1021030000:TOPSPIN_NUS
2025-10-27 13:47:50.136   SOAPNotificationServer started on port: 10004
2025-10-27 13:47:50.136   to CPR: "checkout_license expire no_checkout 1021230100:ASSURE-SST" [id 17], COMMAND_WAIT_TERM
2025-10-27 13:47:50.137   Trying to start SOAPMasSampleTransportServer
2025-10-27 13:47:50.183   SOAPMasSampleTransportServer web service is published at address http://149.236.99.1:10005/services/Bruker.Automation.Services.IBrukTransfer/soap
2025-10-27 13:47:50.184   SOAPMasSampleTransportServer started on port: 10005
2025-10-27 13:47:50.184   Trying to start SOAPExternalSampleTransportServer
2025-10-27 13:47:50.210   external cmd from "CPR": "lic_expire_date 2022-10-04T06:47:23+02:00" on "/UndefinedDir/UndefinedName/1/pdata/1", option="-2"
2025-10-27 13:47:50.211   cmd=lic_expire_date 2022-10-04T06:47:23+02:00
2025-10-27 13:47:50.214   CPR task 17 resumed normally, termstat=0
2025-10-27 13:47:50.215   to CPR: "checkout_license expire no_checkout 1021230200:AUTO_CALIBRATE" [id 18], COMMAND_WAIT_TERM
2025-10-27 13:47:50.222   CPR task 18 resumed normally, termstat=-1
2025-10-27 13:47:50.222   No license available for 1021230200:AUTO_CALIBRATE
2025-10-27 13:47:50.224   SOAPExternalSampleTransportServer web service is published at address http://149.236.99.1:10006/services/Bruker.Automation.Services.IBrukTransfer/soap
2025-10-27 13:47:50.224   SOAPExternalSampleTransportServer started on port: 10006
2025-10-27 13:47:50.303   Endpoint for BrukerAutomationServicesIBrukSystemEndpoints successfully created for MAS: Server: [http://149.236.99.1:10003/services/Bruker.Automation.Services.IBrukProbe/soap, http://149.236.99.1:10005/services/Bruker.Automation.Services.IBrukTransfer/soap, http://149.236.99.1:10006/services/Bruker.Automation.Services.IBrukTransfer/soap, http://149.236.99.1:10001/services/Bruker.Automation.Services.IBrukSettings/soap, http://149.236.99.1:10004/services/Bruker.Automation.Services.IBrukNotificationsConsumer/soap], Endpoint: 149.236.99.9:20005, ID: [Probe, Flip, SampleDestination, Settings, Notifier]
2025-10-27 13:47:50.704   Try to get EPU Ip address : 149.236.99.9
2025-10-27 13:47:50.709   new PDU message: 2=2025-10-27 12:33:34.293: Spectrometer is starting up...
2025-10-27 13:47:50.712   new PDU message: 12=2025-10-27 12:33:34.293: Device Blade: Starting...
2025-10-27 13:47:50.713   new PDU message: 12=2025-10-27 12:33:34.293: Device Blade: is ready for start up...
2025-10-27 13:47:50.713   new PDU message: 12=2025-10-27 12:33:34.293: Device Blade: Starting up takes approximately 3s.
2025-10-27 13:47:50.713   new PDU message: 10=2025-10-27 12:33:34.293: Device Blade: running!
2025-10-27 13:47:50.713   new PDU message: 12=2025-10-27 12:33:34.293: Device PDU Router Outlet: Starting...
2025-10-27 13:47:50.714   new PDU message: 12=2025-10-27 12:33:34.296: Device PDU Router Outlet: is ready for start up...
2025-10-27 13:47:50.714   new PDU message: 12=2025-10-27 12:33:34.296: Switching on power outlet 1 ...
2025-10-27 13:47:50.714   new PDU message: 10=2025-10-27 12:33:34.307: Power outlet 1: Done!
2025-10-27 13:47:50.714   new PDU message: 12=2025-10-27 12:33:34.307: Device PDU Router Outlet: Starting up takes approximately 3s.
2025-10-27 13:47:50.715   new PDU message: 10=2025-10-27 12:33:34.309: Device PDU Router Outlet: running!
2025-10-27 13:47:50.715   new PDU message: 12=2025-10-27 12:33:34.309: Device PDU Blade Outlet: Starting...
2025-10-27 13:47:50.715   new PDU message: 12=2025-10-27 12:33:34.311: Device PDU Blade Outlet: is ready for start up...
2025-10-27 13:47:50.715   new PDU message: 12=2025-10-27 12:33:34.311: Device PDU Blade Outlet: Starting up takes approximately 3s.
2025-10-27 13:47:50.716   new PDU message: 10=2025-10-27 12:33:34.311: Device PDU Blade Outlet: running!
2025-10-27 13:47:50.716   new PDU message: 12=2025-10-27 12:33:34.311: Device PDU1: Starting...
2025-10-27 13:47:50.716   new PDU message: 12=2025-10-27 12:33:34.313: Device PDU1: is ready for start up...
2025-10-27 13:47:50.716   new PDU message: 12=2025-10-27 12:33:34.314: Switching on power outlet 3 ...
2025-10-27 13:47:50.717   new PDU message: 10=2025-10-27 12:33:34.317: Power outlet 3: Done!
2025-10-27 13:47:50.717   new PDU message: 12=2025-10-27 12:33:37.317: Switching on power outlet 4 ...
2025-10-27 13:47:50.717   new PDU message: 10=2025-10-27 12:33:37.332: Power outlet 4: Done!
2025-10-27 13:47:50.717   new PDU message: 12=2025-10-27 12:33:40.332: Switching on power outlet 5 ...
2025-10-27 13:47:50.718   new PDU message: 10=2025-10-27 12:33:40.360: Power outlet 5: Done!
2025-10-27 13:47:50.718   new PDU message: 12=2025-10-27 12:33:43.360: Switching on power outlet 6 ...
2025-10-27 13:47:50.718   new PDU message: 10=2025-10-27 12:33:43.378: Power outlet 6: Done!
2025-10-27 13:47:50.719   new PDU message: 12=2025-10-27 12:33:46.378: Switching on power outlet 7 ...
2025-10-27 13:47:50.719   new PDU message: 10=2025-10-27 12:33:46.392: Power outlet 7: Done!
2025-10-27 13:47:50.719   new PDU message: 12=2025-10-27 12:33:49.392: Switching on power outlet 8 ...
2025-10-27 13:47:50.719   new PDU message: 10=2025-10-27 12:33:49.406: Power outlet 8: Done!
2025-10-27 13:47:50.720   new PDU message: 12=2025-10-27 12:33:52.407: Device PDU1: Starting up takes approximately 3s.
2025-10-27 13:47:50.720   new PDU message: 10=2025-10-27 12:33:52.422: Device PDU1: running!
2025-10-27 13:47:50.720   new PDU message: 12=2025-10-27 12:33:52.422: Device PDU2: Starting...
2025-10-27 13:47:50.720   new PDU message: 12=2025-10-27 12:33:52.424: Device PDU2: is ready for start up...
2025-10-27 13:47:50.721   PDU address: 149.236.99.9:161
2025-10-27 13:47:50.721   new PDU message: 12=2025-10-27 12:33:52.426: Switching on power outlet 2 ...
2025-10-27 13:47:50.721   new PDU message: 10=2025-10-27 12:33:52.440: Power outlet 2: Done!
2025-10-27 13:47:50.721   new PDU message: 12=2025-10-27 12:33:55.440: Switching on power outlet 3 ...
2025-10-27 13:47:50.722   new PDU message: 10=2025-10-27 12:33:55.454: Power outlet 3: Done!
2025-10-27 13:47:50.722   new PDU message: 12=2025-10-27 12:33:58.454: Switching on power outlet 4 ...
2025-10-27 13:47:50.722   new PDU message: 10=2025-10-27 12:33:58.468: Power outlet 4: Done!
2025-10-27 13:47:50.723   new PDU message: 12=2025-10-27 12:34:01.469: Switching on power outlet 5 ...
2025-10-27 13:47:50.723   new PDU message: 10=2025-10-27 12:34:01.483: Power outlet 5: Done!
2025-10-27 13:47:50.723   new PDU message: 12=2025-10-27 12:34:04.483: Switching on power outlet 6 ...
2025-10-27 13:47:50.723   new PDU message: 10=2025-10-27 12:34:04.497: Power outlet 6: Done!
2025-10-27 13:47:50.724   new PDU message: 12=2025-10-27 12:34:07.497: Switching on power outlet 7 ...
2025-10-27 13:47:50.724   new PDU message: 10=2025-10-27 12:34:07.512: Power outlet 7: Done!
2025-10-27 13:47:50.724   new PDU message: 12=2025-10-27 12:34:10.512: Switching on power outlet 8 ...
2025-10-27 13:47:50.724   new PDU message: 10=2025-10-27 12:34:10.526: Power outlet 8: Done!
2025-10-27 13:47:50.725   new PDU message: 12=2025-10-27 12:34:13.526: Device PDU2: Starting up takes approximately 3s.
2025-10-27 13:47:50.725   new PDU message: 10=2025-10-27 12:34:13.543: Device PDU2: running!
2025-10-27 13:47:50.725   new PDU message: 12=2025-10-27 12:34:13.543: Device PDU3: Starting...
2025-10-27 13:47:50.725   new PDU message: 12=2025-10-27 12:34:13.545: Device PDU3: is ready for start up...
2025-10-27 13:47:50.725   new PDU message: 12=2025-10-27 12:34:13.547: Switching on power outlet 2 ...
2025-10-27 13:47:50.726   new PDU message: 10=2025-10-27 12:34:13.561: Power outlet 2: Done!
2025-10-27 13:47:50.726   new PDU message: 12=2025-10-27 12:34:16.561: Switching on power outlet 3 ...
2025-10-27 13:47:50.726   new PDU message: 10=2025-10-27 12:34:16.576: Power outlet 3: Done!
2025-10-27 13:47:50.726   new PDU message: 12=2025-10-27 12:34:19.576: Switching on power outlet 4 ...
2025-10-27 13:47:50.726   new PDU message: 10=2025-10-27 12:34:19.590: Power outlet 4: Done!
2025-10-27 13:47:50.726   new PDU message: 12=2025-10-27 12:34:22.590: Switching on power outlet 5 ...
2025-10-27 13:47:50.727   new PDU message: 10=2025-10-27 12:34:22.605: Power outlet 5: Done!
2025-10-27 13:47:50.727   new PDU message: 12=2025-10-27 12:34:25.605: Switching on power outlet 6 ...
2025-10-27 13:47:50.727   new PDU message: 10=2025-10-27 12:34:25.619: Power outlet 6: Done!
2025-10-27 13:47:50.727   new PDU message: 12=2025-10-27 12:34:28.620: Switching on power outlet 7 ...
2025-10-27 13:47:50.727   new PDU message: 10=2025-10-27 12:34:28.634: Power outlet 7: Done!
2025-10-27 13:47:50.728   new PDU message: 12=2025-10-27 12:34:31.635: Switching on power outlet 8 ...
2025-10-27 13:47:50.728   new PDU message: 10=2025-10-27 12:34:31.663: Power outlet 8: Done!
2025-10-27 13:47:50.728   new PDU message: 12=2025-10-27 12:34:34.663: Device PDU3: Starting up takes approximately 3s.
2025-10-27 13:47:50.728   new PDU message: 10=2025-10-27 12:34:34.683: Device PDU3: running!
2025-10-27 13:47:50.728   new PDU message: 12=2025-10-27 12:34:34.683: Device BSMS 1: Starting...
2025-10-27 13:47:50.728   new PDU message: 12=2025-10-27 12:34:34.769: Device BSMS 1: is ready for start up...
2025-10-27 13:47:50.729   new PDU message: 12=2025-10-27 12:34:34.769: Device BSMS 1: getting shim start up duration, which may take up to 45 seconds ...
2025-10-27 13:47:50.729   new PDU message: 12=2025-10-27 12:36:46.487: Device BSMS 1: Starting up takes approximately 90s.
2025-10-27 13:47:50.729   new PDU message: 12=2025-10-27 12:36:46.953: Device BSMS 1: Ramp up duration for shims is 20 seconds.
2025-10-27 13:47:50.729   new PDU message: 12=2025-10-27 12:36:46.953: Device BSMS 1: getting shim start up duration, which may take up to 45 seconds ...
2025-10-27 13:47:50.729   new PDU message: 10=2025-10-27 12:36:47.777: Device BSMS 1: Status: running!
2025-10-27 13:47:50.729   new PDU message: 10=2025-10-27 12:36:47.777: Device BSMS 1: running!
2025-10-27 13:47:50.730   new PDU message: 12=2025-10-27 12:36:47.777: Device BSMS 2: Starting...
2025-10-27 13:47:50.730   new PDU message: 12=2025-10-27 12:36:47.777: Device BSMS 2: does not exist, ignoring BSMS 2!
2025-10-27 13:47:50.730   new PDU message: 12=2025-10-27 12:36:47.777: Device Acquisition Server 1: Starting...
2025-10-27 13:47:50.730   new PDU message: 12=2025-10-27 12:36:47.777: Device Acquisition Server 1: is ready for start up...
2025-10-27 13:47:50.730   new PDU message: 12=2025-10-27 12:36:47.777: Device Acquisition Server 1: Starting up takes approximately 3s.
2025-10-27 13:47:50.731   new PDU message: 10=2025-10-27 12:36:47.777: Device Acquisition Server 1: running!
2025-10-27 13:47:50.731   new PDU message: 0=2025-10-27 12:36:47.777: Spectrometer is running!
2025-10-27 13:47:51.288   flip with ATMA, isIProbe: false, isMasProbe: true, flipWithATMA: false, result: false
2025-10-27 13:47:51.295   Error configuring BasicSampleChanger for MAS: Initializing ATMA failed:  ATMA2 MAS Server initialize failed: Error in getParameters reported by ProbeServer: hasI2cAccessError while trying to read PICS: AqRackClient: Cannot ensure that the server is in a valid state: Error in "ensureValidServer":    Error Event:      EMERGENCY-STOP activated:   Module internal/external power supply under voltage detected, EmStop activated   Last Occurrence: 840 sec since startup Code: -590 ID: 109 State: pending Device Path: /PSM-A.1/HPPR/2 COVER2.1/HPLNA BB31P.3 Error Event:      EMERGENCY-STOP activated:   External power supply under voltage detected, EmStop activated   Last Occurrence: 840 sec since startup Code: -589 ID: 112 State: pending Device Path: /PSM-A.1/HPPR/2 COVER2.1/HPLNA 1H19F.1 Error Event:      EMERGENCY-STOP activated:   HighVoltage dropped below lower limit, EmStop activated   Last Occurrence: 840 sec since startup Code: -596 ID: 113 State: new Device Path: /PSM-A.1/HPPR/2 COVER2.1/HPLNA BB31P.3 Error Event:      EMERGENCY-STOP activated:   HighVoltage dropped below lower limit, EmStop activated   Last Occurrence: 840 sec since startup Code: -596 ID: 114 State: new Device Path: /PSM-A.1/HPPR/2 COVER2.1/HPLNA 1H19F.1 Error Event:      EMERGENCY-STOP activated:   Transmit <-> Receive switching rate was too high, EmStop activated   Last Occurrence: 840 sec since startup Code: -597 ID: 115 State: new Device Path: /PSM-A.1/HPPR/2 COVER2.1/HPLNA 1H19F.1 Error Event:      EMERGENCY-STOP activated:   Module internal/external power supply under voltage detected, EmStop activated   Last Occurrence: 840 sec since startup Code: -590 ID: 116 State: new Device Path: /PSM-A.1/HPPR/2 COVER2.1/HPLNA 1H19F.1 
2025-10-27 13:47:51.483   Server error in writeRemoteFileToLocalDisk:
Cannot set file permissions:
IDL:bruker.de/common/NotAvailable:1.0
getChunkFromBinaryFile: remote file '/opt/topspin/prog/curdir/root/bsmserrormsg1.log' not available

2025-10-27 13:47:51.737   Error getting optical rotor detection: Error in getParameters reported by ProbeServer:
Installed probe is not an ATMA probe!
2025-10-27 13:47:51.784   BasicSampleChanger MAS configuration: false, false
2025-10-27 13:49:13.391   cmd=_create_drag_tranfer_handler
2025-10-27 13:49:13.399   cmd[1]=re /opt/nmrdata/data/nmrafd/nmr/z/1/pdata/1
2025-10-27 13:49:13.465   cmd[1]=browse_update_last50
2025-10-27 13:49:13.466   cmd[1]=adddatadirautomaticwithcheck /opt/nmrdata/data/nmrafd/nmr
2025-10-27 13:49:13.488   cmd[1]=_create_drag_tranfer_handler
2025-10-27 13:49:13.491   Entered MODULE de.bruker.nmr.pr.disp.BasicNMRModule
2025-10-27 13:49:13.491   adddataset corbaloc:iiop:127.0.0.1:5505/NMRDataServer##%/opt/nmrdata/data/nmrafd/nmr/z/1/pdata/1
2025-10-27 13:50:41.479   cmd[1]=ii restart
2025-10-27 13:50:41.490   sendAllCmds: sendCommand ii restart on: /opt/nmrdata/data/nmrafd/nmr/z/1/pdata/1
2025-10-27 13:50:41.608   keep alive thread started
2025-10-27 13:50:42.147   ii : <html><br>In experiment: z 1 1 /opt/nmrdata/data/nmrafd/nmr <br>(Parameter Set = 'unknown') <br> <br>Cannot run single acquisition: <br>Cannot connect to aqrackserver: AqRackClient: Cannot ensure that the server is in a valid state: <br>Error in &quot;ensureValidServer&quot;:  <br> <br> <br>Error Event: <br> &nbsp; &nbsp; <br>EMERGENCY-STOP activated: <br> &nbsp;HighVoltage dropped below lower limit, EmStop activated <br> &nbsp;Last Occurrence: 840 sec since startup <br>Code: -596 ID: 113 State: pending Device Path: /PSM-A.1/HPPR/2 COVER2.1/HPLNA BB31P.3 <br>Error Event: <br> &nbsp; &nbsp; <br>EMERGENCY-STOP activated: <br> &nbsp;Module internal/external power supply under voltage detected, EmStop activated <br> &nbsp;Last Occurrence: 901 sec since startup <br>Code: -590 ID: 117 State: new Device Path: /PSM-A.1/HPPR/2 COVER2.1/HPLNA BB31P.3 <br>Error Event: <br> &nbsp; &nbsp; <br>EMERGENCY-STOP activated: <br> &nbsp;External power supply under voltage detected, EmStop activated <br> &nbsp;Last Occurrence: 901 sec since startup <br>Code: -589 ID: 118 State: new Device Path: /PSM-A.1/HPPR/2 COVER2.1/HPLNA 1H19F.1 <br></html>
2025-10-27 13:51:14.608   cmd[1]=acqustop end POWCHK_ON ACQU
2025-10-27 13:51:14.610   processStop called: dataset from ct: /opt/nmrdata/data/nmrafd/nmr/z/1/pdata/1, dataset from GO: /opt/nmrdata/data/nmrafd/nmr/z/1/pdata/1
2025-10-27 13:51:15.036   ii : <html><br>In experiment: z 1 1 /opt/nmrdata/data/nmrafd/nmr <br>(Parameter Set = 'unknown') <br> <br>HardwareErrorCheck: Cannot fetch and clear AQS rack errors: <br>client: AqRackClient: Cannot reset AQ rack server: <br>Error in &quot;reset&quot;: EXCEPTION in reset: <br>Cannot reset TRX1: <br>Error Event: <br> &nbsp; &nbsp; <br>EMERGENCY-STOP activated: <br> &nbsp;HighVoltage dropped below lower limit, EmStop activated <br> &nbsp;Last Occurrence: 1071 sec since startup <br>Code: -596 ID: 119 State: pending Device Path: /PSM-A.1/HPPR/2 COVER2.1/HPLNA BB31P.3 <br>Error Event: <br> &nbsp; &nbsp; <br>EMERGENCY-STOP activated: <br> &nbsp;Module internal/external power supply under voltage detected, EmStop activated <br> &nbsp;Last Occurrence: 1104 sec since startup <br>Code: -590 ID: 123 State: new Device Path: /PSM-A.1/HPPR/2 COVER2.1/HPLNA BB31P.3 <br>Error Event: <br> &nbsp; &nbsp; <br>EMERGENCY-STOP activated: <br> &nbsp;External power supply under voltage detected, EmStop activated <br> &nbsp;Last Occurrence: 1104 sec since startup <br>Code: -589 ID: 124 State: new Device Path: /PSM-A.1/HPPR/2 COVER2.1/HPLNA 1H19F.1 <br></html>
2025-10-27 13:51:15.973   waitForEndOfCmd: command not running anymore
2025-10-27 13:51:15.973   command ii terminated
2025-10-27 13:51:15.974   sendCommand: exitStatus for command ii:goError
2025-10-27 13:51:15.976   sendAllCmds: command finished: -1
2025-10-27 13:51:18.967   cmd[1]=ha
2025-10-27 13:51:23.386   HA: 13 addresses found
2025-10-27 13:51:23.436   149.236.99.9:10010 Safety Controller (SN 1115) W149910/1115 ECL 41 (UnitTypeGCubeSaCtr)
2025-10-27 13:51:23.450   149.236.99.9:10001 GREAT60AVN (SN 0136) W154248/0136 ECL 20 (UnitTypeBga)
2025-10-27 13:51:23.464   149.236.99.9:10002 GREAT60AVN (SN 0137) W154248/0137 ECL 20 (UnitTypeBga)
2025-10-27 13:51:23.478   149.236.99.9:10003 GREAT60AVN (SN 0139) W154248/0139 ECL 20 (UnitTypeBga)
2025-10-27 13:51:23.492   149.236.99.9:10005 AV4 BLABB1000 15-600 W144060/000236 ECL 41 (UnitTypeBla)
2025-10-27 13:51:23.507   149.236.99.9:10006 AV4 BLABB1000 15-600 W144060/000235 ECL 41 (UnitTypeBla)
2025-10-27 13:51:23.523   149.236.99.9:10007 AV4 BLAH1000 700-900 W144058/000036 ECL 02 (UnitTypeBla)
2025-10-27 13:51:23.538   149.236.99.9:10004 BSMS/2 ELCB Z100818/09250 ECL 07.03 (UnitTypeBsms)
2025-10-27 13:51:23.548   149.236.99.9:20004 AV4 RETROFIT RS232 BMPC JAC Z161934/00067 ECL 00.00 (UnitTypeUnknown)
2025-10-27 13:51:23.558   149.236.99.9:20005 MAS/3 Magic Angle Spinning Control Unit H139288/0479 ECL 0 (UnitTypeMas)
2025-10-27 13:51:23.574   Error getting HTTP proxy server address for 192.168.99.99: restartServer2: restartBase: The IP address 192.168.99.99 could not be found in /opt/topspin/prog/curdir/root/HttpProxyServer.ref
If the unit with this IP address has been switched on recently
you should run 'cf' now.
2025-10-27 13:51:23.574   192.168.99.99 PDU1 (UnitTypePdu)
2025-10-27 13:51:23.590   Error getting HTTP proxy server address for 192.168.99.101: restartServer2: restartBase: The IP address 192.168.99.101 could not be found in /opt/topspin/prog/curdir/root/HttpProxyServer.ref
If the unit with this IP address has been switched on recently
you should run 'cf' now.
2025-10-27 13:51:23.590   192.168.99.101 PDU2 (UnitTypePdu)
2025-10-27 13:51:23.607   Error getting HTTP proxy server address for 192.168.99.102: restartServer2: restartBase: The IP address 192.168.99.102 could not be found in /opt/topspin/prog/curdir/root/HttpProxyServer.ref
If the unit with this IP address has been switched on recently
you should run 'cf' now.
2025-10-27 13:51:23.607   192.168.99.102 PDU3 (UnitTypePdu)
2025-10-27 13:52:14.435   Error in SuperVision StatusMessageFetcher thread : 
2025-10-27 13:52:14.439   new PDU message: 99=
2025-10-27 13:53:03.839   cmd[1]=ha
2025-10-27 13:53:03.901   Cannot restart CfServer:
Cannot connect to CfServer of configured spectrometer:
CORBA System Exception: CheckRemoteserverVersion: Cannot contact restartserver2 on 149.236.99.9:
_narrow() failed:
check if restartserver2 process is runningCannot restart CfServer:
CORBA System Exception: CheckRemoteserverVersion: Cannot contact restartserver2 on 149.236.99.9:
_narrow() failed:
check if restartserver2 process is running
2025-10-27 13:53:31.177   new PDU message: 2=2025-10-27 12:53:30.695: Spectrometer is starting up...
2025-10-27 13:53:31.178   new PDU message: 12=2025-10-27 12:53:30.695: Device Blade: Starting...
2025-10-27 13:53:31.180   new PDU message: 12=2025-10-27 12:53:30.695: Device Blade: is ready for start up...
2025-10-27 13:53:31.180   new PDU message: 12=2025-10-27 12:53:30.695: Device Blade: Starting up takes approximately 3s.
2025-10-27 13:53:31.180   new PDU message: 10=2025-10-27 12:53:30.695: Device Blade: running!
2025-10-27 13:53:31.180   new PDU message: 12=2025-10-27 12:53:30.695: Device PDU Router Outlet: Starting...
2025-10-27 13:53:31.181   new PDU message: 12=2025-10-27 12:53:30.697: Device PDU Router Outlet: is ready for start up...
2025-10-27 13:53:31.181   new PDU message: 12=2025-10-27 12:53:30.697: Switching on power outlet 1 ...
2025-10-27 13:53:31.181   new PDU message: 10=2025-10-27 12:53:30.707: Power outlet 1: Done!
2025-10-27 13:53:31.181   new PDU message: 12=2025-10-27 12:53:30.707: Device PDU Router Outlet: Starting up takes approximately 3s.
2025-10-27 13:53:31.182   new PDU message: 10=2025-10-27 12:53:30.710: Device PDU Router Outlet: running!
2025-10-27 13:53:31.182   new PDU message: 12=2025-10-27 12:53:30.710: Device PDU Blade Outlet: Starting...
2025-10-27 13:53:31.184   new PDU message: 12=2025-10-27 12:53:30.712: Device PDU Blade Outlet: is ready for start up...
2025-10-27 13:53:31.184   new PDU message: 12=2025-10-27 12:53:30.712: Device PDU Blade Outlet: Starting up takes approximately 3s.
2025-10-27 13:53:31.185   new PDU message: 10=2025-10-27 12:53:30.712: Device PDU Blade Outlet: running!
2025-10-27 13:53:31.185   new PDU message: 12=2025-10-27 12:53:30.712: Device PDU1: Starting...
2025-10-27 13:53:31.185   new PDU message: 12=2025-10-27 12:53:30.714: Device PDU1: is ready for start up...
2025-10-27 13:53:31.185   new PDU message: 12=2025-10-27 12:53:30.716: Switching on power outlet 3 ...
2025-10-27 13:53:31.187   new PDU message: 10=2025-10-27 12:53:30.719: Power outlet 3: Done!
2025-10-27 13:53:34.187   new PDU message: 12=2025-10-27 12:53:33.719: Switching on power outlet 4 ...
2025-10-27 13:53:34.198   new PDU message: 10=2025-10-27 12:53:33.730: Power outlet 4: Done!
2025-10-27 13:53:37.198   new PDU message: 12=2025-10-27 12:53:36.731: Switching on power outlet 5 ...
2025-10-27 13:53:37.209   new PDU message: 10=2025-10-27 12:53:36.742: Power outlet 5: Done!
2025-10-27 13:53:40.209   new PDU message: 12=2025-10-27 12:53:39.742: Switching on power outlet 6 ...
2025-10-27 13:53:40.220   new PDU message: 10=2025-10-27 12:53:39.753: Power outlet 6: Done!
2025-10-27 13:53:43.221   new PDU message: 12=2025-10-27 12:53:42.753: Switching on power outlet 7 ...
2025-10-27 13:53:43.232   new PDU message: 10=2025-10-27 12:53:42.764: Power outlet 7: Done!
2025-10-27 13:53:46.232   new PDU message: 12=2025-10-27 12:53:45.765: Switching on power outlet 8 ...
2025-10-27 13:53:46.244   new PDU message: 10=2025-10-27 12:53:45.777: Power outlet 8: Done!
2025-10-27 13:53:49.244   new PDU message: 12=2025-10-27 12:53:48.777: Device PDU1: Starting up takes approximately 3s.
2025-10-27 13:53:49.259   new PDU message: 10=2025-10-27 12:53:48.792: Device PDU1: running!
2025-10-27 13:53:49.261   new PDU message: 12=2025-10-27 12:53:48.792: Device PDU2: Starting...
2025-10-27 13:53:49.263   new PDU message: 12=2025-10-27 12:53:48.794: Device PDU2: is ready for start up...
2025-10-27 13:53:49.263   new PDU message: 12=2025-10-27 12:53:48.796: Switching on power outlet 2 ...
2025-10-27 13:53:49.273   new PDU message: 10=2025-10-27 12:53:48.806: Power outlet 2: Done!
2025-10-27 13:53:52.274   new PDU message: 12=2025-10-27 12:53:51.807: Switching on power outlet 3 ...
2025-10-27 13:53:52.285   new PDU message: 10=2025-10-27 12:53:51.817: Power outlet 3: Done!
2025-10-27 13:53:55.285   new PDU message: 12=2025-10-27 12:53:54.818: Switching on power outlet 4 ...
2025-10-27 13:53:55.296   new PDU message: 10=2025-10-27 12:53:54.828: Power outlet 4: Done!
2025-10-27 13:53:58.296   new PDU message: 12=2025-10-27 12:53:57.829: Switching on power outlet 5 ...
2025-10-27 13:53:58.307   new PDU message: 10=2025-10-27 12:53:57.840: Power outlet 5: Done!
2025-10-27 13:54:01.307   new PDU message: 12=2025-10-27 12:54:00.840: Switching on power outlet 6 ...
2025-10-27 13:54:01.318   new PDU message: 10=2025-10-27 12:54:00.851: Power outlet 6: Done!
2025-10-27 13:54:04.318   new PDU message: 12=2025-10-27 12:54:03.851: Switching on power outlet 7 ...
2025-10-27 13:54:04.329   new PDU message: 10=2025-10-27 12:54:03.862: Power outlet 7: Done!
2025-10-27 13:54:07.329   new PDU message: 12=2025-10-27 12:54:06.862: Switching on power outlet 8 ...
2025-10-27 13:54:07.340   new PDU message: 10=2025-10-27 12:54:06.873: Power outlet 8: Done!
2025-10-27 13:54:10.341   new PDU message: 12=2025-10-27 12:54:09.874: Device PDU2: Starting up takes approximately 3s.
2025-10-27 13:54:10.357   new PDU message: 10=2025-10-27 12:54:09.890: Device PDU2: running!
2025-10-27 13:54:10.360   new PDU message: 12=2025-10-27 12:54:09.890: Device PDU3: Starting...
2025-10-27 13:54:10.360   new PDU message: 12=2025-10-27 12:54:09.893: Device PDU3: is ready for start up...
2025-10-27 13:54:10.362   new PDU message: 12=2025-10-27 12:54:09.894: Switching on power outlet 2 ...
2025-10-27 13:54:10.373   new PDU message: 10=2025-10-27 12:54:09.906: Power outlet 2: Done!
2025-10-27 13:54:13.373   new PDU message: 12=2025-10-27 12:54:12.906: Switching on power outlet 3 ...
2025-10-27 13:54:13.384   new PDU message: 10=2025-10-27 12:54:12.917: Power outlet 3: Done!
2025-10-27 13:54:16.082   GojavaCorba::serverIsAlive:TRANSIENT: acquisition server not reachable: Retries exceeded, couldn't reconnect to 149.236.99.9:5618
2025-10-27 13:54:16.082   keep alive thread terminated
2025-10-27 13:54:16.384   new PDU message: 12=2025-10-27 12:54:15.918: Switching on power outlet 4 ...
2025-10-27 13:54:16.395   new PDU message: 10=2025-10-27 12:54:15.928: Power outlet 4: Done!
2025-10-27 13:54:19.396   new PDU message: 12=2025-10-27 12:54:18.929: Switching on power outlet 5 ...
2025-10-27 13:54:19.407   new PDU message: 10=2025-10-27 12:54:18.940: Power outlet 5: Done!
2025-10-27 13:54:22.407   new PDU message: 12=2025-10-27 12:54:21.940: Switching on power outlet 6 ...
2025-10-27 13:54:22.418   new PDU message: 10=2025-10-27 12:54:21.951: Power outlet 6: Done!
2025-10-27 13:54:25.418   new PDU message: 12=2025-10-27 12:54:24.951: Switching on power outlet 7 ...
2025-10-27 13:54:25.429   new PDU message: 10=2025-10-27 12:54:24.962: Power outlet 7: Done!
2025-10-27 13:54:28.429   new PDU message: 12=2025-10-27 12:54:27.962: Switching on power outlet 8 ...
2025-10-27 13:54:28.440   new PDU message: 10=2025-10-27 12:54:27.973: Power outlet 8: Done!
2025-10-27 13:54:31.441   new PDU message: 12=2025-10-27 12:54:30.974: Device PDU3: Starting up takes approximately 3s.
2025-10-27 13:54:31.458   new PDU message: 10=2025-10-27 12:54:30.991: Device PDU3: running!
2025-10-27 13:54:31.459   new PDU message: 12=2025-10-27 12:54:30.991: Device BSMS 1: Starting...
2025-10-27 13:54:31.547   new PDU message: 12=2025-10-27 12:54:31.081: Device BSMS 1: is ready for start up...
2025-10-27 13:54:31.548   new PDU message: 12=2025-10-27 12:54:31.081: Device BSMS 1: getting shim start up duration, which may take up to 45 seconds ...
2025-10-27 13:56:42.671   new PDU message: 12=2025-10-27 12:56:42.206: Device BSMS 1: Starting up takes approximately 90s.
2025-10-27 13:56:42.872   new PDU message: 12=2025-10-27 12:56:42.406: Device BSMS 1: Ramp up duration for shims is 20 seconds.
2025-10-27 13:56:42.872   new PDU message: 12=2025-10-27 12:56:42.406: Device BSMS 1: getting shim start up duration, which may take up to 45 seconds ...
2025-10-27 13:56:43.396   new PDU message: 10=2025-10-27 12:56:42.931: Device BSMS 1: Status: running!
2025-10-27 13:56:43.397   new PDU message: 10=2025-10-27 12:56:42.931: Device BSMS 1: running!
2025-10-27 13:56:43.397   new PDU message: 12=2025-10-27 12:56:42.931: Device BSMS 2: Starting...
2025-10-27 13:56:43.399   new PDU message: 12=2025-10-27 12:56:42.931: Device BSMS 2: does not exist, ignoring BSMS 2!
2025-10-27 13:56:43.399   new PDU message: 12=2025-10-27 12:56:42.931: Device Acquisition Server 1: Starting...
2025-10-27 13:56:43.399   new PDU message: 12=2025-10-27 12:56:42.931: Device Acquisition Server 1: is ready for start up...
2025-10-27 13:56:43.399   new PDU message: 12=2025-10-27 12:56:42.931: Device Acquisition Server 1: Starting up takes approximately 3s.
2025-10-27 13:56:43.399   new PDU message: 10=2025-10-27 12:56:42.931: Device Acquisition Server 1: running!
2025-10-27 13:56:43.400   new PDU message: 0=2025-10-27 12:56:42.931: Spectrometer is running!
2025-10-27 13:57:24.270   cmd[1]=ha
2025-10-27 13:57:29.863   HA: 13 addresses found
2025-10-27 13:57:31.406   149.236.99.9:10010 Safety Controller (SN 1115) W149910/1115 ECL 41 (UnitTypeGCubeSaCtr)
2025-10-27 13:57:31.418   149.236.99.9:10001 GREAT60AVN (SN 0136) W154248/0136 ECL 20 (UnitTypeBga)
2025-10-27 13:57:31.428   149.236.99.9:10002 GREAT60AVN (SN 0137) W154248/0137 ECL 20 (UnitTypeBga)
2025-10-27 13:57:31.438   149.236.99.9:10003 GREAT60AVN (SN 0139) W154248/0139 ECL 20 (UnitTypeBga)
2025-10-27 13:57:31.449   149.236.99.9:10005 AV4 BLABB1000 15-600 W144060/000236 ECL 41 (UnitTypeBla)
2025-10-27 13:57:31.459   149.236.99.9:10006 AV4 BLABB1000 15-600 W144060/000235 ECL 41 (UnitTypeBla)
2025-10-27 13:57:31.469   149.236.99.9:10007 AV4 BLAH1000 700-900 W144058/000036 ECL 02 (UnitTypeBla)
2025-10-27 13:57:31.479   149.236.99.9:10004 BSMS/2 ELCB Z100818/09250 ECL 07.03 (UnitTypeBsms)
2025-10-27 13:57:31.485   149.236.99.9:20004 AV4 RETROFIT RS232 BMPC JAC Z161934/00067 ECL 00.00 (UnitTypeUnknown)
2025-10-27 13:57:31.491   149.236.99.9:20005 MAS/3 Magic Angle Spinning Control Unit H139288/0479 ECL 0 (UnitTypeMas)
2025-10-27 13:57:31.502   Error getting HTTP proxy server address for 192.168.99.99: restartServer2: restartBase: The IP address 192.168.99.99 could not be found in /opt/topspin/prog/curdir/root/HttpProxyServer.ref
If the unit with this IP address has been switched on recently
you should run 'cf' now.
2025-10-27 13:57:31.502   192.168.99.99 PDU1 (UnitTypePdu)
2025-10-27 13:57:31.512   Error getting HTTP proxy server address for 192.168.99.101: restartServer2: restartBase: The IP address 192.168.99.101 could not be found in /opt/topspin/prog/curdir/root/HttpProxyServer.ref
If the unit with this IP address has been switched on recently
you should run 'cf' now.
2025-10-27 13:57:31.513   192.168.99.101 PDU2 (UnitTypePdu)
2025-10-27 13:57:31.523   Error getting HTTP proxy server address for 192.168.99.102: restartServer2: restartBase: The IP address 192.168.99.102 could not be found in /opt/topspin/prog/curdir/root/HttpProxyServer.ref
If the unit with this IP address has been switched on recently
you should run 'cf' now.
2025-10-27 13:57:31.523   192.168.99.102 PDU3 (UnitTypePdu)
2025-10-27 14:02:26.134   Probe changed
2025-10-27 14:02:26.180   Error checking for MAS probe: Error in pushCommandAndParameters reported by ProbeServer:
getCurrentProbeId: no probe is installed!
2025-10-27 14:02:26.181   VTC_VT_GAS_SLOPE_LIMIT set to 500.0 lph/s
2025-10-27 14:02:26.191   Error getting probe temperature sensors: Error in pushCommandAndParameters reported by ProbeServer:
getCurrentProbeId: no probe is installed!
2025-10-27 14:02:26.197   MAS probe changed
2025-10-27 14:02:26.205   Error checking for MAS probe: Error in pushCommandAndParameters reported by ProbeServer:
getCurrentProbeId: no probe is installed!
2025-10-27 14:02:26.206   Get LIFTMODE
2025-10-27 14:02:26.206   Probe changed, no CRP probe
2025-10-27 14:02:26.207   Probe changed: LIFTMODE: 0
2025-10-27 14:02:26.249   Error getting optical rotor detection: Error in getParameters reported by ProbeServer:
getCurrentProbeId: no probe is installed!
2025-10-27 14:02:26.305   Error in BasicSampleChanger MAS configuration: HTTP transport error: java.net.ConnectException: Connection refused (Connection refused)
2025-10-27 14:02:26.381   Error checking for MAS probe: Error in pushCommandAndParameters reported by ProbeServer:
getCurrentProbeId: no probe is installed!
2025-10-27 14:02:26.388   Error checking for MAS probe: Error in pushCommandAndParameters reported by ProbeServer:
getCurrentProbeId: no probe is installed!
2025-10-27 14:02:26.388   flip with ATMA, isIProbe: false, isMasProbe: false, flipWithATMA: false, result: false
2025-10-27 14:02:29.342   178.310.263 Configuration Error : <HTML>The configuration is incomplete or faulty. The device cannot operate.
Please check the following points:

An error occurred while retrieving the probe's information from TopSpin.
Please restart TopSpin or perform a CF.

178.310.289:System Error:The current probe cannot be null.<br>Origin: MAS/3 Magic Angle Spinning Control Unit_H139288_0479
2025-10-27 14:05:56.492   cmd[1]=masdisp
2025-10-27 14:05:56.499   cmd[1]=_create_drag_tranfer_handler
2025-10-27 14:05:56.766   Error checking for MAS probe: Error in pushCommandAndParameters reported by ProbeServer:
getCurrentProbeId: no probe is installed!
2025-10-27 14:05:57.511   Error checking for LTMAS probe: Error in pushCommandAndParameters reported by ProbeServer:
getCurrentProbeId: no probe is installed!
2025-10-27 14:05:59.746   Error getting optical rotor detection: Error in getParameters reported by ProbeServer:
getCurrentProbeId: no probe is installed!
2025-10-27 14:05:59.754   Error checking for MAS probe: Error in pushCommandAndParameters reported by ProbeServer:
getCurrentProbeId: no probe is installed!
2025-10-27 14:05:59.761   Error checking for MAS probe: Error in pushCommandAndParameters reported by ProbeServer:
getCurrentProbeId: no probe is installed!
2025-10-27 14:05:59.791   MAS Shuttle, probe(MAS probe, IProbe: false, false
2025-10-27 14:05:59.839   MAS Shuttle hasMasShuttleSupport: false
2025-10-27 14:06:00.350   Error checking for LTMAS probe: Error in pushCommandAndParameters reported by ProbeServer:
getCurrentProbeId: no probe is installed!
2025-10-27 14:06:32.077   cmd[1]=edhead
2025-10-27 14:06:32.122   EdprobeEditor: HConfServer.getServer().getProperty(ACQUISITION_IN_PROGRESS)= NOT_LOCKED
2025-10-27 14:06:32.123   EdprobeEditor: setViewMode = false
2025-10-27 14:06:37.755   Probe changed
2025-10-27 14:06:37.798   VTC_VT_GAS_SLOPE_LIMIT set to 50.0 lph/s
2025-10-27 14:06:37.806   MAS probe changed
2025-10-27 14:06:38.046   Get LIFTMODE
2025-10-27 14:06:38.046   Probe changed, no CRP probe
2025-10-27 14:06:38.047   Probe changed: LIFTMODE: 0
2025-10-27 14:06:38.082   Error getting optical rotor detection: Error in getParameters reported by ProbeServer:
Installed probe is not an ATMA probe!
2025-10-27 14:06:38.084   Error in BasicSampleChanger MAS configuration: HTTP transport error: java.net.ConnectException: Connection refused (Connection refused)
2025-10-27 14:06:38.172   flip with ATMA, isIProbe: false, isMasProbe: true, flipWithATMA: false, result: false
2025-10-27 14:06:40.280   You need to run expinstall to apply modifications you made.
2025-10-27 14:06:40.280   edasp: resetting auto_default
2025-10-27 14:06:40.404   getHconfServerLocal started local.
2025-10-27 14:06:40.408   external cmd from "CPR": "index_datasets /opt/topspin4.4.0/conf/instr/remote_spect/probeheads" on "/UndefinedDir/UndefinedName/1/pdata/1", option="-2"
2025-10-27 14:06:40.408   cmd[1]=index_datasets /opt/topspin4.4.0/conf/instr/remote_spect/probeheads
2025-10-27 14:06:40.410   getHconfServer started remote.
2025-10-27 14:06:47.763   Elevation for right Administrate Spectrometer Configuration for command null successful
2025-10-27 14:06:51.508   cmd[1]=masdisp
2025-10-27 14:06:51.514   cmd[1]=_create_drag_tranfer_handler
2025-10-27 14:06:51.571   setTemperatureLimits: useCap=false
2025-10-27 14:06:53.735   Error getting optical rotor detection: Error in getParameters reported by ProbeServer:
Installed probe is not an ATMA probe!
2025-10-27 14:06:53.811   MAS Shuttle, probe(MAS probe, IProbe: true, false
2025-10-27 14:06:53.828   MAS Shuttle hasMasShuttleSupport: false
2025-10-27 14:07:01.707   Elevation for right Administrate Spectrometer Configuration for command null successful
2025-10-27 14:07:02.197   Information : <HTML>The MAS unit is now ready for probe exchange.
Please click OK once you exchanged the probe.<br>Origin: MAS/3 Magic Angle Spinning Control Unit_H139288_0479
2025-10-27 14:07:05.296   Notification arrived, ID:9c412771-fe9a-48f9-86ce-35a120869828, message: The MAS unit is now ready for probe exchange.
Please click OK once you exchanged the probe., title: Information, answerToURL: 
2025-10-27 14:07:05.399   Mas answer: http://192.168.98.5:80/services/Bruker.Automation.Services.IBrukNotificationsProducer/ws/NotificationsProducer/ => http://149.236.99.9:20005/services/Bruker.Automation.Services.IBrukNotificationsProducer/ws/NotificationsProducer/
2025-10-27 14:07:05.452   Endpoint for BrukerAutomationServicesIBrukNotificationsProducer successfully created
2025-10-27 14:07:05.722   cmd[1]=edprobe
2025-10-27 14:07:05.744   EdprobeEditor: HConfServer.getServer().getProperty(ACQUISITION_IN_PROGRESS)= NOT_LOCKED
2025-10-27 14:07:05.744   EdprobeEditor: setViewMode = false
2025-10-27 14:07:12.824   external cmd from "CPR": "index_datasets /opt/topspin4.4.0/conf/instr/remote_spect/probeheads" on "/UndefinedDir/UndefinedName/1/pdata/1", option="-2"
2025-10-27 14:07:12.825   cmd[1]=index_datasets /opt/topspin4.4.0/conf/instr/remote_spect/probeheads
2025-10-27 14:08:30.947   Probe changed
2025-10-27 14:08:31.006   Error checking for MAS probe: Error in pushCommandAndParameters reported by ProbeServer:
getCurrentProbeId: no probe is installed!
2025-10-27 14:08:31.006   VTC_VT_GAS_SLOPE_LIMIT set to 500.0 lph/s
2025-10-27 14:08:31.014   Error getting probe temperature sensors: Error in pushCommandAndParameters reported by ProbeServer:
getCurrentProbeId: no probe is installed!
2025-10-27 14:08:31.014   MAS probe changed
2025-10-27 14:08:31.022   Error checking for MAS probe: Error in pushCommandAndParameters reported by ProbeServer:
getCurrentProbeId: no probe is installed!
2025-10-27 14:08:31.022   Get LIFTMODE
2025-10-27 14:08:31.022   Probe changed, no CRP probe
2025-10-27 14:08:31.023   Probe changed: LIFTMODE: 0
2025-10-27 14:08:31.118   Error getting optical rotor detection: Error in getParameters reported by ProbeServer:
getCurrentProbeId: no probe is installed!
2025-10-27 14:08:31.120   Error in BasicSampleChanger MAS configuration: HTTP transport error: java.net.ConnectException: Connection refused (Connection refused)
2025-10-27 14:08:31.162   Error checking for LTMAS probe: Error in pushCommandAndParameters reported by ProbeServer:
getCurrentProbeId: no probe is installed!
2025-10-27 14:08:31.196   Error checking for LTMAS probe: Error in pushCommandAndParameters reported by ProbeServer:
getCurrentProbeId: no probe is installed!
2025-10-27 14:08:31.204   Error checking for MAS probe: Error in pushCommandAndParameters reported by ProbeServer:
getCurrentProbeId: no probe is installed!
2025-10-27 14:08:31.205   Error checking for LTMAS probe: Error in pushCommandAndParameters reported by ProbeServer:
getCurrentProbeId: no probe is installed!
2025-10-27 14:08:31.210   Error checking for MAS probe: Error in pushCommandAndParameters reported by ProbeServer:
getCurrentProbeId: no probe is installed!
2025-10-27 14:08:31.211   flip with ATMA, isIProbe: false, isMasProbe: false, flipWithATMA: false, result: false
2025-10-27 14:08:34.590   178.310.263 Configuration Error : <HTML>The configuration is incomplete or faulty. The device cannot operate.
Please check the following points:

An error occurred while retrieving the probe's information from TopSpin.
Please restart TopSpin or perform a CF.

178.310.289:System Error:The current probe cannot be null.<br>Origin: MAS/3 Magic Angle Spinning Control Unit_H139288_0479
2025-10-27 14:10:45.220   cmd[1]=edhead
2025-10-27 14:10:45.250   EdprobeEditor: HConfServer.getServer().getProperty(ACQUISITION_IN_PROGRESS)= NOT_LOCKED
2025-10-27 14:10:45.250   EdprobeEditor: setViewMode = false
2025-10-27 14:10:52.043   Probe changed
2025-10-27 14:10:52.086   VTC_VT_GAS_SLOPE_LIMIT set to 50.0 lph/s
2025-10-27 14:10:52.093   MAS probe changed
2025-10-27 14:10:52.440   Get LIFTMODE
2025-10-27 14:10:52.440   Probe changed, no CRP probe
2025-10-27 14:10:52.441   Probe changed: LIFTMODE: 0
2025-10-27 14:10:52.471   Error getting optical rotor detection: Error in getParameters reported by ProbeServer:
Installed probe is not an ATMA probe!
2025-10-27 14:10:52.473   Error in BasicSampleChanger MAS configuration: HTTP transport error: java.net.ConnectException: Connection refused (Connection refused)
2025-10-27 14:10:52.494   flip with ATMA, isIProbe: false, isMasProbe: true, flipWithATMA: false, result: false
2025-10-27 14:11:00.977   edasp: resetting auto_default
2025-10-27 14:11:00.978   You need to run expinstall to apply modifications you made.
2025-10-27 14:11:00.989   external cmd from "CPR": "index_datasets /opt/topspin4.4.0/conf/instr/remote_spect/probeheads" on "/UndefinedDir/UndefinedName/1/pdata/1", option="-2"
2025-10-27 14:11:00.989   cmd[1]=index_datasets /opt/topspin4.4.0/conf/instr/remote_spect/probeheads
2025-10-27 14:11:01.000   java.nio.file.NoSuchFileException : Could not scan: /opt/topspin4.4.0/conf/instr/remote_spect/probeheads
2025-10-27 14:11:55.632   Elevation for right Administrate Spectrometer Configuration for command null successful
2025-10-27 14:12:00.467   cmd[1]=masdisp
2025-10-27 14:12:00.473   cmd[1]=_create_drag_tranfer_handler
2025-10-27 14:12:00.543   setTemperatureLimits: useCap=false
2025-10-27 14:12:02.489   Error getting optical rotor detection: Error in getParameters reported by ProbeServer:
Installed probe is not an ATMA probe!
2025-10-27 14:12:02.575   MAS Shuttle, probe(MAS probe, IProbe: true, false
2025-10-27 14:12:02.590   MAS Shuttle hasMasShuttleSupport: false
2025-10-27 14:12:10.002   Elevation for right Administrate Spectrometer Configuration for command null successful
2025-10-27 14:12:10.252   Information : <HTML>The MAS unit is now ready for probe exchange.
Please click OK once you exchanged the probe.<br>Origin: MAS/3 Magic Angle Spinning Control Unit_H139288_0479
2025-10-27 14:13:03.718   Probe changed
2025-10-27 14:13:03.776   Error checking for MAS probe: Error in pushCommandAndParameters reported by ProbeServer:
getCurrentProbeId: no probe is installed!
2025-10-27 14:13:03.776   VTC_VT_GAS_SLOPE_LIMIT set to 500.0 lph/s
2025-10-27 14:13:03.783   Error getting probe temperature sensors: Error in pushCommandAndParameters reported by ProbeServer:
getCurrentProbeId: no probe is installed!
2025-10-27 14:13:03.784   MAS probe changed
2025-10-27 14:13:03.794   Error checking for MAS probe: Error in pushCommandAndParameters reported by ProbeServer:
getCurrentProbeId: no probe is installed!
2025-10-27 14:13:03.794   Get LIFTMODE
2025-10-27 14:13:03.794   Probe changed, no CRP probe
2025-10-27 14:13:03.795   Probe changed: LIFTMODE: 0
2025-10-27 14:13:03.879   Error getting optical rotor detection: Error in getParameters reported by ProbeServer:
getCurrentProbeId: no probe is installed!
2025-10-27 14:13:03.882   Error in BasicSampleChanger MAS configuration: HTTP transport error: java.net.ConnectException: Connection refused (Connection refused)
2025-10-27 14:13:03.912   Error checking for LTMAS probe: Error in pushCommandAndParameters reported by ProbeServer:
getCurrentProbeId: no probe is installed!
2025-10-27 14:13:03.947   Error checking for LTMAS probe: Error in pushCommandAndParameters reported by ProbeServer:
getCurrentProbeId: no probe is installed!
2025-10-27 14:13:03.953   Error checking for MAS probe: Error in pushCommandAndParameters reported by ProbeServer:
getCurrentProbeId: no probe is installed!
2025-10-27 14:13:03.955   Error checking for LTMAS probe: Error in pushCommandAndParameters reported by ProbeServer:
getCurrentProbeId: no probe is installed!
2025-10-27 14:13:03.960   Error checking for MAS probe: Error in pushCommandAndParameters reported by ProbeServer:
getCurrentProbeId: no probe is installed!
2025-10-27 14:13:03.960   flip with ATMA, isIProbe: false, isMasProbe: false, flipWithATMA: false, result: false
2025-10-27 14:13:05.160   Error waiting for confirmation: Notification was closed from other consumer
2025-10-27 14:13:07.342   178.310.263 Configuration Error : <HTML>The configuration is incomplete or faulty. The device cannot operate.
Please check the following points:

An error occurred while retrieving the probe's information from TopSpin.
Please restart TopSpin or perform a CF.

178.310.289:System Error:The current probe cannot be null.<br>Origin: MAS/3 Magic Angle Spinning Control Unit_H139288_0479
2025-10-27 14:17:42.874   Elevation for right Administrate Spectrometer Configuration for command null successful
2025-10-27 14:17:42.963   MAS Unit setParameter(): parameter: ENTER_PROBE_CHANGE_MODE, value: null, Client received SOAP Fault from server: Main state machine error: cannot start processing of 'ProbeExchange' because the state machine is not in '{ReadyForTransfer, Idle}' state but in 'BringToSafeState'. System Error.

 Please see the server log to find more detail regarding exact cause of the failure.
2025-10-27 14:17:42.964   MAS Unit error : Client received SOAP Fault from server: Main state machine error: cannot start processing of 'ProbeExchange' because the state machine is not in '{ReadyForTransfer, Idle}' state but in 'BringToSafeState'. System Error.

 Please see the server log to find more detail regarding exact cause of the failure.
2025-10-27 14:17:49.883   cmd[1]=edhead
2025-10-27 14:17:49.914   EdprobeEditor: HConfServer.getServer().getProperty(ACQUISITION_IN_PROGRESS)= NOT_LOCKED
2025-10-27 14:17:49.914   EdprobeEditor: setViewMode = false
2025-10-27 14:17:54.578   Probe changed
2025-10-27 14:17:54.618   VTC_VT_GAS_SLOPE_LIMIT set to 50.0 lph/s
2025-10-27 14:17:54.624   MAS probe changed
2025-10-27 14:17:55.033   Get LIFTMODE
2025-10-27 14:17:55.033   Probe changed, no CRP probe
2025-10-27 14:17:55.033   Probe changed: LIFTMODE: 0
2025-10-27 14:17:55.060   Error getting optical rotor detection: Error in getParameters reported by ProbeServer:
Installed probe is not an ATMA probe!
2025-10-27 14:17:55.062   Error in BasicSampleChanger MAS configuration: HTTP transport error: java.net.ConnectException: Connection refused (Connection refused)
2025-10-27 14:17:55.078   flip with ATMA, isIProbe: false, isMasProbe: true, flipWithATMA: false, result: false
2025-10-27 14:17:58.672   edasp: resetting auto_default
2025-10-27 14:17:58.673   You need to run expinstall to apply modifications you made.
2025-10-27 14:17:58.681   external cmd from "CPR": "index_datasets /opt/topspin4.4.0/conf/instr/remote_spect/probeheads" on "/UndefinedDir/UndefinedName/1/pdata/1", option="-2"
2025-10-27 14:17:58.682   cmd[1]=index_datasets /opt/topspin4.4.0/conf/instr/remote_spect/probeheads
2025-10-27 14:19:03.192   Elevation for right Administrate Spectrometer Configuration for command null successful
2025-10-27 14:28:29.466   cmd[1]=ii
2025-10-27 14:28:29.572   GojavaCorba::serverIsAlive:TRANSIENT: acquisition server not reachable: Retries exceeded, couldn't reconnect to 149.236.99.9:5618
2025-10-27 14:28:29.579   sendAllCmds: sendCommand ii  on: /opt/nmrdata/data/nmrafd/nmr/z/1/pdata/1
2025-10-27 14:28:30.908   keep alive thread started
2025-10-27 14:28:31.288   ii : <html><br>In experiment: z 1 1 /opt/nmrdata/data/nmrafd/nmr <br>(Parameter Set = 'unknown') <br> <br>Cannot run single acquisition: <br>Cannot connect to aqrackserver: AqRackClient: Cannot ensure that the server is in a valid state: <br>Error in &quot;ensureValidServer&quot;:  <br> <br> <br>Error Event: <br> &nbsp; &nbsp; <br>EMERGENCY-STOP activated: <br> &nbsp;HighVoltage dropped below lower limit, EmStop activated <br> &nbsp;Last Occurrence: 2039 sec since startup <br>Code: -596 ID: 222 State: pending Device Path: /PSM-A.1/HPPR/2 COVER2.1/HPLNA BB31P.3 <br>Error Event: <br> &nbsp; &nbsp; <br>EMERGENCY-STOP activated: <br> &nbsp;Module internal/external power supply under voltage detected, EmStop activated <br> &nbsp;Last Occurrence: 2039 sec since startup <br>Code: -590 ID: 225 State: pending Device Path: /PSM-A.1/HPPR/2 COVER2.1/HPLNA 1H19F.1 <br>Error Event: <br> &nbsp; &nbsp; <br>EMERGENCY-STOP activated: <br> &nbsp;Module internal/external power supply under voltage detected, EmStop activated <br> &nbsp;Last Occurrence: 2039 sec since startup <br>Code: -590 ID: 226 State: new Device Path: /PSM-A.1/HPPR/2 COVER2.1/HPLNA BB31P.3 <br>Error Event: <br> &nbsp; &nbsp; <br>EMERGENCY-STOP activated: <br> &nbsp;HighVoltage dropped below lower limit, EmStop activated <br> &nbsp;Last Occurrence: 2040 sec since startup <br>Code: -596 ID: 227 State: new Device Path: /PSM-A.1/HPPR/2 COVER2.1/HPLNA 1H19F.1 <br>Error Event: <br> &nbsp; &nbsp; <br>EMERGENCY-STOP activated: <br> &nbsp;Transmit &lt;-&gt; Receive switching rate was too high, EmStop activated <br> &nbsp;Last Occurrence: 2040 sec since startup <br>Code: -597 ID: 228 State: new Device Path: /PSM-A.1/HPPR/2 COVER2.1/HPLNA 1H19F.1 <br>Error Event: <br> &nbsp; &nbsp; <br>EMERGENCY-STOP activated: <br> &nbsp;External power supply under voltage detected, EmStop activated <br> &nbsp;Last Occurrence: 2040 sec since startup <br>Code: -589 ID: 229 State: new Device Path: /PSM-A.1/HPPR/2 COVER2.1/HPLNA 1H19F.1 <br></html>
2025-10-27 14:29:23.656   cmd[1]=acqustop end POWCHK_ON ACQU
2025-10-27 14:29:23.657   processStop called: dataset from ct: /opt/nmrdata/data/nmrafd/nmr/z/1/pdata/1, dataset from GO: /opt/nmrdata/data/nmrafd/nmr/z/1/pdata/1
2025-10-27 14:29:24.169   ii : <html><br>In experiment: z 1 1 /opt/nmrdata/data/nmrafd/nmr <br>(Parameter Set = 'unknown') <br> <br>HardwareErrorCheck: Cannot fetch and clear AQS rack errors: <br>client: AqRackClient: Cannot reset AQ rack server: <br>Error in &quot;reset&quot;: EXCEPTION in reset: <br>Cannot reset TRX1: <br>Error Event: <br> &nbsp; &nbsp; <br>EMERGENCY-STOP activated: <br> &nbsp;HighVoltage dropped below lower limit, EmStop activated <br> &nbsp;Last Occurrence: 2144 sec since startup <br>Code: -596 ID: 230 State: pending Device Path: /PSM-A.1/HPPR/2 COVER2.1/HPLNA BB31P.3 <br>Error Event: <br> &nbsp; &nbsp; <br>EMERGENCY-STOP activated: <br> &nbsp;Module internal/external power supply under voltage detected, EmStop activated <br> &nbsp;Last Occurrence: 2144 sec since startup <br>Code: -590 ID: 231 State: pending Device Path: /PSM-A.1/HPPR/2 COVER2.1/HPLNA 1H19F.1 <br>Error Event: <br> &nbsp; &nbsp; <br>EMERGENCY-STOP activated: <br> &nbsp;Module internal/external power supply under voltage detected, EmStop activated <br> &nbsp;Last Occurrence: 2197 sec since startup <br>Code: -590 ID: 232 State: new Device Path: /PSM-A.1/HPPR/2 COVER2.1/HPLNA BB31P.3 <br>Error Event: <br> &nbsp; &nbsp; <br>EMERGENCY-STOP activated: <br> &nbsp;HighVoltage dropped below lower limit, EmStop activated <br> &nbsp;Last Occurrence: 2197 sec since startup <br>Code: -596 ID: 233 State: new Device Path: /PSM-A.1/HPPR/2 COVER2.1/HPLNA 1H19F.1 <br>Error Event: <br> &nbsp; &nbsp; <br>EMERGENCY-STOP activated: <br> &nbsp;Transmit &lt;-&gt; Receive switching rate was too high, EmStop activated <br> &nbsp;Last Occurrence: 2197 sec since startup <br>Code: -597 ID: 234 State: new Device Path: /PSM-A.1/HPPR/2 COVER2.1/HPLNA 1H19F.1 <br>Error Event: <br> &nbsp; &nbsp; <br>EMERGENCY-STOP activated: <br> &nbsp;External power supply under voltage detected, EmStop activated <br> &nbsp;Last Occurrence: 2197 sec since startup <br>Code: -589 ID: 235 State: new Device Path: /PSM-A.1/HPPR/2 COVER2.1/HPLNA 1H19F.1 <br></html>
2025-10-27 14:29:36.584   waitForEndOfCmd: command not running anymore
2025-10-27 14:29:36.584   command ii terminated
2025-10-27 14:29:36.584   sendCommand: exitStatus for command ii:goError
2025-10-27 14:29:36.584   sendAllCmds: command finished: -1
2025-10-27 14:29:38.274   cmd[1]=ha
2025-10-27 14:29:42.465   HA: 13 addresses found
2025-10-27 14:29:42.494   149.236.99.9:10010 Safety Controller (SN 1115) W149910/1115 ECL 41 (UnitTypeGCubeSaCtr)
2025-10-27 14:29:42.507   149.236.99.9:10001 GREAT60AVN (SN 0136) W154248/0136 ECL 20 (UnitTypeBga)
2025-10-27 14:29:42.519   149.236.99.9:10002 GREAT60AVN (SN 0137) W154248/0137 ECL 20 (UnitTypeBga)
2025-10-27 14:29:42.531   149.236.99.9:10003 GREAT60AVN (SN 0139) W154248/0139 ECL 20 (UnitTypeBga)
2025-10-27 14:29:42.545   149.236.99.9:10005 AV4 BLABB1000 15-600 W144060/000236 ECL 41 (UnitTypeBla)
2025-10-27 14:29:42.558   149.236.99.9:10006 AV4 BLABB1000 15-600 W144060/000235 ECL 41 (UnitTypeBla)
2025-10-27 14:29:42.571   149.236.99.9:10007 AV4 BLAH1000 700-900 W144058/000036 ECL 02 (UnitTypeBla)
2025-10-27 14:29:42.585   149.236.99.9:10004 BSMS/2 ELCB Z100818/09250 ECL 07.03 (UnitTypeBsms)
2025-10-27 14:29:42.592   149.236.99.9:20004 AV4 RETROFIT RS232 BMPC JAC Z161934/00067 ECL 00.00 (UnitTypeUnknown)
2025-10-27 14:29:42.600   149.236.99.9:20005 MAS/3 Magic Angle Spinning Control Unit H139288/0479 ECL 0 (UnitTypeMas)
2025-10-27 14:29:42.613   Error getting HTTP proxy server address for 192.168.99.99: restartServer2: restartBase: The IP address 192.168.99.99 could not be found in /opt/topspin/prog/curdir/root/HttpProxyServer.ref
If the unit with this IP address has been switched on recently
you should run 'cf' now.
2025-10-27 14:29:42.613   192.168.99.99 PDU1 (UnitTypePdu)
2025-10-27 14:29:42.626   Error getting HTTP proxy server address for 192.168.99.101: restartServer2: restartBase: The IP address 192.168.99.101 could not be found in /opt/topspin/prog/curdir/root/HttpProxyServer.ref
If the unit with this IP address has been switched on recently
you should run 'cf' now.
2025-10-27 14:29:42.626   192.168.99.101 PDU2 (UnitTypePdu)
2025-10-27 14:29:42.638   Error getting HTTP proxy server address for 192.168.99.102: restartServer2: restartBase: The IP address 192.168.99.102 could not be found in /opt/topspin/prog/curdir/root/HttpProxyServer.ref
If the unit with this IP address has been switched on recently
you should run 'cf' now.
2025-10-27 14:29:42.638   192.168.99.102 PDU3 (UnitTypePdu)
2025-10-27 14:30:36.850   cmd[1]=about
2025-10-27 21:47:49.575   Cannot get maintenance status of instrument: com.bruker.pmw.client.invoker.ApiException: java.net.ConnectException: Failed to connect to localhost/0:0:0:0:0:0:0:1:8080

  2025-10-28
---------------
2025-10-28 05:47:49.365   to CPR: "checkout_license expire no_checkout 1011014000:TOPSPIN4" [id 19], COMMAND_WAIT_TERM
2025-10-28 05:47:50.488   external cmd from "CPR": "lic_expire_date 2036-10-25T06:47:23+02:00" on "/UndefinedDir/UndefinedName/1/pdata/1", option="-2"
2025-10-28 05:47:50.488   cmd[1]=lic_expire_date 2036-10-25T06:47:23+02:00
2025-10-28 05:47:50.490   CPR task 19 resumed normally, termstat=0
2025-10-28 05:47:50.490   to CPR: "checkout_license expire no_checkout 1021023000:TOPSPIN_GXP_4" [id 20], COMMAND_WAIT_TERM
2025-10-28 05:47:50.497   CPR task 20 resumed normally, termstat=-1
2025-10-28 05:47:50.497   No license available for 1021023000:TOPSPIN_GXP_4
2025-10-28 05:47:50.497   to CPR: "checkout_license expire no_checkout 1011140100:SMP_CMCA" [id 21], COMMAND_WAIT_TERM
2025-10-28 05:47:50.541   Cannot get maintenance status of instrument: com.bruker.pmw.client.invoker.ApiException: java.net.ConnectException: Failed to connect to localhost/0:0:0:0:0:0:0:1:8080
2025-10-28 05:47:50.581   external cmd from "CPR": "lic_expire_date 2036-10-25T06:47:23+02:00" on "/UndefinedDir/UndefinedName/1/pdata/1", option="-2"
2025-10-28 05:47:50.581   cmd[1]=lic_expire_date 2036-10-25T06:47:23+02:00
2025-10-28 05:47:50.582   CPR task 21 resumed normally, termstat=0
2025-10-28 05:47:50.582   to CPR: "checkout_license expire no_checkout 1011140200:SMP_CMCA_CLASSROOM" [id 22], COMMAND_WAIT_TERM
2025-10-28 05:47:50.591   CPR task 22 resumed normally, termstat=-1
2025-10-28 05:47:50.591   No license available for 1011140200:SMP_CMCA_CLASSROOM
2025-10-28 05:47:50.592   to CPR: "checkout_license expire no_checkout 1011160100:SMP_CMCQ" [id 23], COMMAND_WAIT_TERM
2025-10-28 05:47:50.601   CPR task 23 resumed normally, termstat=-1
2025-10-28 05:47:50.601   No license available for 1011160100:SMP_CMCQ
2025-10-28 05:47:50.602   to CPR: "checkout_license expire no_checkout 1021290200:FBS_ADVANCED" [id 24], COMMAND_WAIT_TERM
2025-10-28 05:47:50.611   CPR task 24 resumed normally, termstat=-1
2025-10-28 05:47:50.611   No license available for 1021290200:FBS_ADVANCED
2025-10-28 05:47:50.613   to CPR: "checkout_license expire no_checkout 1011330100:SMP_POTENCY_MR" [id 25], COMMAND_WAIT_TERM
2025-10-28 05:47:50.622   CPR task 25 resumed normally, termstat=-1
2025-10-28 05:47:50.622   No license available for 1011330100:SMP_POTENCY_MR
2025-10-28 05:47:50.623   to CPR: "checkout_license expire no_checkout 1011320100:SMP_SMART_DRIVE_NMR" [id 26], COMMAND_WAIT_TERM
2025-10-28 05:47:50.632   CPR task 26 resumed normally, termstat=-1
2025-10-28 05:47:50.632   No license available for 1011320100:SMP_SMART_DRIVE_NMR
2025-10-28 05:47:50.633   to CPR: "checkout_license expire no_checkout 1011150100:SMP_STRUCELU" [id 27], COMMAND_WAIT_TERM
2025-10-28 05:47:50.718   external cmd from "CPR": "lic_expire_date 2022-10-04T06:47:23+02:00" on "/UndefinedDir/UndefinedName/1/pdata/1", option="-2"
2025-10-28 05:47:50.718   cmd[1]=lic_expire_date 2022-10-04T06:47:23+02:00
2025-10-28 05:47:50.719   CPR task 27 resumed normally, termstat=0
2025-10-28 05:47:50.720   to CPR: "checkout_license expire no_checkout 1011150200:SMP_STRUCELU_CLASSROOM" [id 28], COMMAND_WAIT_TERM
2025-10-28 05:47:50.727   CPR task 28 resumed normally, termstat=-1
2025-10-28 05:47:50.727   No license available for 1011150200:SMP_STRUCELU_CLASSROOM
2025-10-28 05:47:50.728   to CPR: "checkout_license expire no_checkout 1021030000:TOPSPIN_NUS" [id 29], COMMAND_WAIT_TERM
2025-10-28 05:47:50.736   CPR task 29 resumed normally, termstat=-1
2025-10-28 05:47:50.736   No license available for 1021030000:TOPSPIN_NUS
2025-10-28 05:47:50.736   to CPR: "checkout_license expire no_checkout 1021230100:ASSURE-SST" [id 30], COMMAND_WAIT_TERM
2025-10-28 05:47:50.820   external cmd from "CPR": "lic_expire_date 2022-10-04T06:47:23+02:00" on "/UndefinedDir/UndefinedName/1/pdata/1", option="-2"
2025-10-28 05:47:50.821   cmd[1]=lic_expire_date 2022-10-04T06:47:23+02:00
2025-10-28 05:47:50.822   CPR task 30 resumed normally, termstat=0
2025-10-28 05:47:50.822   to CPR: "checkout_license expire no_checkout 1021230200:AUTO_CALIBRATE" [id 31], COMMAND_WAIT_TERM
2025-10-28 05:47:50.830   CPR task 31 resumed normally, termstat=-1
2025-10-28 05:47:50.830   No license available for 1021230200:AUTO_CALIBRATE
2025-10-28 06:05:50.139   [AbstractQueueJob] Executing job
2025-10-28 06:05:50.140   cmd[1]=getheliumlog __WAITSTART__w__WAITEND__
2025-10-28 06:05:50.149   cmd[1]=_checkcmd getheliumlog __WAITSTART__w__WAITEND__
2025-10-28 06:05:50.150   cmd[1]=_launchwithorwithoutdata _checkcmd getheliumlog +~+~idsstart~+~+58796456412308+~+~idend~+~+
2025-10-28 06:05:50.154   external cmd from "CPR": "_checkcmd xauw getheliumlog +~+~idsstart~+~+58796456412308+~+~idend~+~+" on "", option="-2"
2025-10-28 06:05:50.154   cmd[1]=_checkcmd xauw getheliumlog +~+~idsstart~+~+58796456412308+~+~idend~+~+
2025-10-28 06:05:50.166   to CPR: "getheliumlog" [id 32], COMMAND_WAIT_TERM
2025-10-28 06:05:50.446   external cmd from "CPR": "-exch exchange.33236 hconf_client getHeliumlog" on "/opt/nmrdata/data/nmrafd/nmr/z/1/pdata/1", option="-4"
2025-10-28 06:05:50.446   cmd[1]=hconf_client getHeliumlog __WAITSTART__w__WAITEND__
2025-10-28 06:05:50.532   confirm external command termination: "-4"
2025-10-28 06:05:50.534   CPR task 32 resumed normally, termstat=0
2025-10-28 06:05:50.535   Priority job 'PriorityQueueJob[id=2, command=getheliumlog, priority=0, dataObject=/opt/nmrdata/data/nmrafd/nmr/z/1/pdata/1]' returned a null result for command 'getheliumlog'. Could not detect failure or success.
2025-10-28 11:07:20.441   cmd[1]=savelogs
2025-10-28 11:09:38.067   SaveLogs: Blade found, using remote log files directory
2025-10-28 11:09:44.276   SaveLogs: all directories fetched
2025-10-28 11:09:44.277   SaveLogs: Blade found, using remote log files directory
2025-10-28 11:09:44.291   Getting log files: BGAETH_0 = 192.168.99.16
2025-10-28 11:09:44.292   Getting log files: BGAETH_1 = 192.168.99.15
2025-10-28 11:09:44.293   Getting log files: BGAETH_2 = 192.168.99.14
2025-10-28 11:09:44.293   Getting log files: BSMSETH = 192.168.99.10
2025-10-28 11:09:44.293   Getting log files: BLAETH_0 = 192.168.99.13
2025-10-28 11:09:44.294   Getting log files: BLAETH_1 = 192.168.99.12
2025-10-28 11:09:44.294   Getting log files: BLAETH_2 = 192.168.99.11
2025-10-28 11:09:44.295   Getting log files: BLAETH_3 = 192.168.99.10
2025-10-28 11:09:44.296   Getting log files: GCUBESACTRETH = 192.168.99.17
2025-10-28 11:09:44.297   Getting log files: MAS = 192.168.98.5
2025-10-28 11:09:44.297   Getting log files: VTUETH = 192.168.99.10
2025-10-28 11:09:44.318   Trying to get BrukerDeviceIDXML from: http://149.236.99.9:20005/BrukerDeviceId.xml
2025-10-28 11:09:44.318   Trying to get BrukerDeviceIDXML from: http://149.236.99.9:10001/BrukerDeviceId.xml
2025-10-28 11:09:44.320   Trying to get BrukerDeviceIDXML from: http://149.236.99.9:10002/BrukerDeviceId.xml
2025-10-28 11:09:44.321   Trying to get BrukerDeviceIDXML from: http://149.236.99.9:10003/BrukerDeviceId.xml
2025-10-28 11:09:44.323   Trying to get BrukerDeviceIDXML from: http://149.236.99.9:10006/BrukerDeviceId.xml
2025-10-28 11:09:44.324   Trying to get BrukerDeviceIDXML from: http://149.236.99.9:10005/BrukerDeviceId.xml
2025-10-28 11:09:44.326   Trying to get BrukerDeviceIDXML from: http://149.236.99.9:10004/BrukerDeviceId.xml
2025-10-28 11:09:44.327   Trying to get BrukerDeviceIDXML from: http://149.236.99.9:10007/BrukerDeviceId.xml
2025-10-28 11:09:44.328   Trying to get BrukerDeviceIDXML from: http://149.236.99.9:10004/BrukerDeviceId.xml
2025-10-28 11:09:44.330   Trying to get BrukerDeviceIDXML from: http://149.236.99.9:10010/BrukerDeviceId.xml
2025-10-28 11:09:44.331   Trying to get BrukerDeviceIDXML from: http://149.236.99.9:10004/BrukerDeviceId.xml
2025-10-28 11:09:44.429   Trying to download: http://149.236.99.9:10001/cgi-bin/getlog to: /opt/topspin4.4.0/prog/logfiles/devices/BGAU_W154248_0136/
2025-10-28 11:09:44.429   Trying to download: http://149.236.99.9:10003/cgi-bin/getlog to: /opt/topspin4.4.0/prog/logfiles/devices/BGAU_W154248_0139/
2025-10-28 11:09:44.430   Trying to download: http://149.236.99.9:10004/report.brukreport to: /opt/topspin4.4.0/prog/logfiles/devices/ELCB_Z100818_9250/
2025-10-28 11:09:44.430   Trying to download: http://149.236.99.9:10006/report.brukreport to: /opt/topspin4.4.0/prog/logfiles/devices/BLA-W144060-000235/
2025-10-28 11:09:44.431   Trying to download: http://149.236.99.9:10005/report.brukreport to: /opt/topspin4.4.0/prog/logfiles/devices/BLA-W144060-000236/
2025-10-28 11:09:44.432   Trying to download: http://149.236.99.9:10010/cgi-bin/getlog to: /opt/topspin4.4.0/prog/logfiles/devices/GCubeSaCtr_W149910_1115/
2025-10-28 11:09:44.432   Trying to download: http://149.236.99.9:10007/report.brukreport to: /opt/topspin4.4.0/prog/logfiles/devices/BLA-W144058-000036/
2025-10-28 11:09:44.432   Trying to download: http://149.236.99.9:10004/report.brukreport to: /opt/topspin4.4.0/prog/logfiles/devices/ELCB_Z100818_9250/
2025-10-28 11:09:44.434   Trying to download: http://149.236.99.9:10002/cgi-bin/getlog to: /opt/topspin4.4.0/prog/logfiles/devices/BGAU_W154248_0137/
2025-10-28 11:09:44.437   Error getting file, FileNotFoundException: http://149.236.99.9:10004/report.brukreport
2025-10-28 11:09:44.439   Error getting file, FileNotFoundException: http://149.236.99.9:10004/report.brukreport
2025-10-28 11:09:44.441   Trying to download: http://149.236.99.9:20005/report.brukreport to: /opt/topspin4.4.0/prog/logfiles/devices/MAS_H139288_0479/
2025-10-28 11:09:44.443   Error getting file, FileNotFoundException: http://149.236.99.9:10006/report.brukreport
2025-10-28 11:09:44.444   Error getting file, FileNotFoundException: http://149.236.99.9:10005/report.brukreport
2025-10-28 11:09:44.444   Error getting file, FileNotFoundException: http://149.236.99.9:10007/report.brukreport
2025-10-28 11:10:14.068   Trying to download: http://149.236.99.9:20005/mas.masprofiles to: /opt/topspin4.4.0/prog/logfiles/devices/MAS_H139288_0479/
2025-10-28 11:10:14.092   Trying to download: http://149.236.99.9:20005/mas.masconfigs to: /opt/topspin4.4.0/prog/logfiles/devices/MAS_H139288_0479/
2025-10-28 11:10:15.282   to CPR: "save_logs -verbose -name "TopSpinSupport_Leiden-750-problem_avance750_nmrafd_2025-10-28T11.09" -add "/home/nmrafd/Pictures/Oct27-2025-error-01.png|/home/nmrafd/Pictures/Oct27-2025-error-02.png|/home/nmrafd/Pictures/Oct27-2025-error-03.png|/home/nmrafd/Pictures/Oct27-2025-error-04.png|/home/nmrafd/Pictures/Oct27-2025-error-05.png"" [id 33], COMMAND_WAIT_TERM
2025-10-28 11:10:15.401   fromCPR loadAlert id = 0 message = Compiling AU program 'save_logs'
Please wait
2025-10-28 11:10:15.403   xauw : Compiling AU program 'save_logs'
Please wait
2025-10-28 11:10:20.592   fromCPR loadAlert id = 0 message = Compilation finished
2025-10-28 11:10:20.593   xauw : Compilation finished
