CONFIGURATION INFORMATION
=========================

Path         : /opt/topspin3.7.0/conf/instr/AVANCEIII600/uxnmr.info
Date         : Fri May 29 15:10:01 2026
Release      : TopSpin 3.7.0
Installed in : /opt/topspin3.7.0
Host         : av600
OS           : CentOS Linux release 7.9.2009 (Core)
CPU          : Intel(R) Xeon(R) W-2123 CPU @ 3.60GHz (8 cores at 1200 MHz with Hyperthreading)
User         : nmrafd
System       : Avance III 600 NMR spectrometer
1H-frequency : 600.13 MHz
Description  : AVANCE III 600
Location     : Leiden the Netherlands
Bruker Order : 10017285
Configured in: av600:/opt/topspin3.7.0/conf/instr/AVANCEIII600

IPSO: connected to spectrometer subnet
- TCP/IP address = 149.236.99.90
 - IPSO type: 19"
- Tctrl : 1
- Fctrls: 4
- Gctrl1: without digital preemphasis
- Rctrl : none
- FREDs : none
- DPP : none

DRU1: AQS DRU-E Z102520/01974 ECL 06.01
- TCP/IP address = 149.236.99.89
- Firmware Version = 170619
- DRU1 controls AQS-Rack and HPPR/2

AQS: connected to 149.236.99.89:/dev/tty10
  _Slot_ SBSB _____________________Board_____________________
  Number Addr Type HW-VS FW-VS ID  ECL Name   Description
  -----------------------------------------------------------
     2   0x10 0x42   0x4    AW  R  4.4 REC-1  AQS RXAD600 Z102117/955 ECL 04.04
     3   0x34 0xc9   0x1        X  1.2 REF-1  REF/2-1000 Reference Board for AQS/2 Receiver
     4   0x24 0x19   0x8    AE  S  2.7 SGU-1  AQS SGU/2 600 Z103081/02029 ECL 02.07 FPGA-Vs=AF
     5   0x25 0x19   0x8    AE  S  1.0 SGU-2  AQS SGU/2 600 Z103081/00065 ECL 01.00 FPGA-Vs=AF
     6   0x26 0x19   0x8    AE  S  2.7 SGU-3  AQS SGU/2 600 Z103081/02031 ECL 02.07 FPGA-Vs=AF
     7   0x27 0x19   0x8    AE  S  1.0 SGU-4  AQS SGU/2 600 Z103081/00040 ECL 01.00 FPGA-Vs=AF
    21   0x21 0xcf     0        P  1.0 PSD-1  PSD/3 Power Supply Distribution Board
    --   0x20 0xd1     0        B  3.2 MASTER AQS/3 Chassis
     1   0x20  0x7     0        B      MASTER AQS Rack Master
  Logical Receiver/SGU configuration:


Router: none installed


Transmitters at the spectrometer subnet:
----------------------------------------
BLA_W1345096_0199 W1345096/0199 ECL 1:
- TCP/IP address = 149.236.99.253
- Firmware VS    = 20120627
- Amplifier      = BLAXH2H300/100/150 E 200-600MHZ: W1345096/0199 ECL 1
- Router         = BLMMR32 RF AMPLIFIER MODULE: W1345204/0374 ECL 0
- Controller     = BLA CONTROL BOARD 6 2V H-USB: W1522050/4533 ECL 2
BLA_W1345092_0382 W1345092/0382 ECL 1:
- TCP/IP address = 149.236.99.252
- Firmware VS    = 20120627
- Amplifier      = BLAX300 E 6-365MHZ INR: W1345092/0382 ECL 1
- Router         = BLMMR31 RF AMPLIFIER MODULE: W1345212/1263 ECL 0
- Controller     = BLA CONTROL BOARD 6 2CH: W1522050/4899 ECL 05
LTRX Z109890/00101 ECL 01.02:
- TCP/IP address = 149.236.99.20
- Amplifier      = BSMS/2 LOCK TRANSCEIVER 600: Z109890/00101 ECL 01.02

BSMS: BSMS/2 connected to ethernet
- TCP/IP address = 149.236.99.20
- ELCB firmware version = 20230420
- GAB current limits = 0.0/X, 0.0/Y, 10.0/Z (in A)
- SCB channels = 40
- Shim System = BOSS3-SB
- L-TRX = BSMS/2 LOCK TRANSCEIVER 600: Z109890/00101 ECL 01.02
- Lock: on L-TRX board

Bruker Automatic Changer: device connected to 149.236.99.90:/dev/tty04
  Error in communication with sample changer: timeout <BACS off, sleeping or not connected>
  Using 60 as default for number of holders
- Capacity: 60 holders (assumed)

Eurotherm VTU: device connected to 149.236.99.90:/dev/tty05

Sample Changers at the spectrometer subnet:
-------------------------------------------------
Sample Changer 1: SampleJet
- TCP/IP address   = 149.236.99.55

Cryo Cooling Control Unit: CU5 - COOLING UNIT/5 Z159073/049
- TCP/IP address   = 149.236.99.254

Preamplifiers :
HPPR2: - HPPR/2 preamplifier connected to 149.236.99.89:/dev/tty10
    Type      : HPPR/2
    Controller: Cover/1 with Application firmware = AQ
                15 LEDs for tuning, 15 LEDs for matching
    Module  1 : 1H LNA
                PN=Z003462, SN=00383 from 20050512
    Module  2 : XBB19F 2HS
                PN=Z003506, SN=00407 from 20050621
    Module  3 : 2H
                PN=Z003473, SN=00385 from 20050517
    Module  4 : 13C/79Br
                PN=Z003524, SN=01408 from 20210408
    Module  5 : 15N
                PN=Z003530, SN=01272 from 20210415



Gradient Controller cable connections
--------------------------------------------------------------------
GCtrl1: connected to GAB in BSMS

RF cable connections (detected)
--------------------------------------------------------------------
SGU1 NORM output -> input 1 of transmitter 1 (BLAXH2H300/100/150 E 200-600MHZ W1345096/0199 at TCP/IP 149.236.99.253)
SGU1 AUX  output -> input 2 of transmitter 2 (BLAX300 E 6-365MHZ INR W1345092/0382 at TCP/IP 149.236.99.252)
SGU2 NORM output -> input 2 of transmitter 1 (BLAXH2H300/100/150 E 200-600MHZ W1345096/0199 at TCP/IP 149.236.99.253)
SGU2 AUX  output -> TUNE signal input of HPPR
SGU3 NORM output -> input 1 of transmitter 2 (BLAX300 E 6-365MHZ INR W1345092/0382 at TCP/IP 149.236.99.252)
SGU3 AUX  output -> input 3 of transmitter 1 (BLAXH2H300/100/150 E 200-600MHZ W1345096/0199 at TCP/IP 149.236.99.253)
SGU4 NORM output -> input 4 of transmitter 1 (BLAXH2H300/100/150 E 200-600MHZ W1345096/0199 at TCP/IP 149.236.99.253)
SGU4 AUX  output -> open

Blanking cable connections (detected)
--------------------------------------------------------------------
transmitter 1 = BLAXH2H300/100/150 E 200-600MHZ W1345096/0199 at TCP/IP 149.236.99.253:
- amplifier 1H-100W uses blanking 2
- amplifier X-300W uses blanking 1
- amplifier 2H-150W needs no blanking

transmitter 2 = BLAX300 E 6-365MHZ INR W1345092/0382 at TCP/IP 149.236.99.252:
- amplifier X-300W uses blanking 3

transmitter 3 = BSMS/2 LOCK TRANSCEIVER 600 Z109890/00101 at TCP/IP 149.236.99.20:
- amplifier 2H-5W needs no blanking


