start configuration on server
wait for server to start hardware configuration
get permission to start a new configuration
start a new configuration
reinitialize objects
determine instrument name
create directories
read old configuration
edit parameters
send user input to server
wait for server to handle parameters
get permission to continue configuration
continue configuration
parse input from user
check for questions from server
configure AQ racks
contact restartserver
contact aqrackserver
read board configuration from aqrackserver
configure SCU
configure {EPU}
configure {GTU}
read sequencer types from {GTU} at 192.168.180.18
configure TRX 1200
read sequencer types from TRX 1200 at 192.168.180.38
read all RG values from TRX 1200 1 ... done
configure TRX 1200
read sequencer types from TRX 1200 at 192.168.180.46
read all RG values from TRX 1200 2 ... done
configure PSM-A
configure HPPR/2 COVER2
read preamplifier module configuration
configure HPLNA 1H19F
configure 2H
configure XBB19F 2HP
configure RACK
configure FANTRAY
configure PSM-48V
configure PSM-D
configure REF 1200
check ethernet hardware
there are 4 DHCP controlled devices and 18 devices with fixed IP to check
try to connect 22 devices at the spectrometer subnet
connected: BLA-W144061-001207 at IP 192.168.99.11
connected: ELCB_Z100818_9486 at IP 192.168.99.10
connected: BACS2_H15200-01_556 at IP 192.168.99.13
connected: PDU1 at IP 192.168.99.99
read configuration data from BSMS/2
FirmwareUpdate[BLA at 192.168.99.11]: current firmware 20210223 is up-to-date
downloading calibration firmware for preamplifier module Z103204/01512 ... done
no pending updates
calibration firmware for preamplifier module Z103204/01512 channel 1 is up-to-date
downloading calibration firmware for preamplifier module Z003472/02220 ... done
calibration firmware for preamplifier module Z003472/02220 channel 1 is up-to-date
downloading calibration firmware for preamplifier module Z102026/00653 ... done
calibration firmware for preamplifier module Z102026/00653 channel 1 is up-to-date
checking BIS of magnet system ... done
downloaded BIS for magnet system
edit parameters
send user input to server
wait for server to handle parameters
finish configuration on server
wait for server to finish hardware configuration
get permission to continue configuration
continue configuration
parse input from user
check for questions from server
get permission to finish configuration
finish configuration
configure remaining units
detect wiring and connections
detect RF wiring between TRXs and amplifiers:
check if a transmitter detects a 78 MHz signal from TRX1-NORM ... done
check if a transmitter detects a 78 MHz signal from TRX1-AUX ... done
check if a transmitter detects a 500 MHz signal from TRX1-NORM ... done
check if a transmitter detects a 78 MHz signal from TRX2-NORM ... done
check if a transmitter detects a 78 MHz signal from TRX2-AUX ... done
check if a transmitter detects a 500 MHz signal from TRX2-AUX ... done
check if a transmitter detects blanking signal of TRX1 ... done
check if a transmitter detects blanking signal of TRX2 ... done
detection of RF wiring between TRXs and amplifiers finished.
detect RF wiring between preamplifier and receiver:
Preparing system for test... done
... prepare TRXs
... prepare preamplifiers
Start detection ... done
Look up connection for PREAMP1
detected connection: TRX1 <-> PREAMP1
Look up connection for PREAMP2
detected connection: TRX1 <-> PREAMP2
Look up connection for PREAMP3
detected connection: TRX2 <-> PREAMP3
All connections found.
... reseting TRXs
Finished.
detection of RF wiring between preamplifier and receiver finished.
write configuration parameter file
write configuration information file
write machine-readable configuration information file
show configuration
enable or disable GTU Gradient Processor according to GradAmpType
hardware detection finished
allow other clients to start a configuration
execute edsp cf
additional setups